Skip to the content
123

TIP31C

STMicroelectronicsExtended

-65℃~+150℃ 1 NPN 1.2V 10 100V 300uA 3A 40W 5V NPN TO-220 Bipolar (BJT) ROHS

Part id
st/TIP31C
Category
Bipolar (BJT)
Package
TO-220
Pins
4
In stock
7,463 at JLCPCB (C13506)
Used on
7 open-source boards

Overview

The TIP31C is a bipolar made by STMicroelectronics in a TO-220 package with 3 pins. -65℃~+150℃ 1 NPN 1.2V 10 100V 300uA 3A 40W 5V NPN TO-220 Bipolar (BJT) ROHS.

PCBKit's library has its KiCad symbol (Transistors:NPN B1 C2 E3, from CERN's library) and its footprint (ICs And Semiconductors THD:TO-220-HFLIP, from CERN's library), ready for a KiCad board. 7,463 are in stock at JLCPCB (part C13506). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

Transistors:NPN B1 C2 E3From CERN's library

Footprint

123
ICs And Semiconductors THD:TO-220-HFLIPFrom CERN's library

Pinout

3
The pins of the TIP31C
PinNameType
1BPassive
2CPassive
3EPassive

Open-source boards using it

7
  • 2 layers96.5 × 94 mmLinear supply, the printed circuit board in 3D

    Linear supply

    anshu-patra/pcb_design

    a linear voltage power supply which takes in 220v and 50hz ac as input and converts it into a linera voltage power supply of 5V and 2A stable supply and also contains a foldback short circuit protection

    21 partsMIT
  • 2 layers80 × 75 mmPlanta control, the printed circuit board in 3D

    Planta control

    cesar191/diseno_PCB

    diseño de una pcb de control el cual puede tener diferentes estructuras

    55 parts
  • 2 layers209 × 139.5 mmPEH PCB, the printed circuit board in 3D

    PEH PCB

    jodhsinghnahal/piezo_matlab

    Simulation, circuit and PCB design repository for investigating piezoelectric energy harvesting (PEH) interfaces under conventional vibration excitation and underwater acoustic excitation.

    27 parts
  • 2 layers75 × 45 mmKiCad Design Files, the printed circuit board in 3D

    KiCad Design Files

    norisionut12/12V-Class-AB-Audio-Amplifier

    Discrete 12V single-supply Class AB audio amplifier with active-low relay speaker protection and linear voltage regulator.

    34 partsMIT
  • 2 layers110 × 100 mmSchematicPLC V0.1, the printed circuit board in 3D

    SchematicPLC V0.1

    nxvxr14/control-celda-fts-mecatronica-UNAB

    IMPLEMENTACIÓN DE UN SISTEMA PARA CONTROL DE SUPERVISIÓN Y ADQUISICIÓN DE DATOS DE LA CELDA MECATRÓNICA DE FISCHERTECHNIK DEL LABORATORIO DE AUTOMATIZACIÓN UTILIZANDO HARDWARE Y SOFTWARE LIBRE

    189 parts
  • 2 layers118.1 × 74.9 mmLED Dimmer, the printed circuit board in 3D

    LED Dimmer

    settinger/LED-command-center

    KiCad repo for my first ever panel-mount project

    82 partsBSD-3-Clause
  • 2 layers90 × 55 mmDispensador, the printed circuit board in 3D

    Dispensador

    EmersonEE/My_KiCad

    27 parts

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the TIP31C?

Yes. The symbol is Transistors:NPN B1 C2 E3 and the footprint ICs And Semiconductors THD:TO-220-HFLIP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TIP31C?

TO-220, with 3 pins. Its footprint is drawn on this page.

Where is the TIP31C datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the TIP31C?

JLCPCB lists it as part C13506, with 7,463 in stock; the sellers' links on this page open their listings.

What can replace the TIP31C?

Parts like it in the library: the TIP31C by JSMSEMI, the TIP31C by onsemi and the TIP31C by SPTECH. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TIP31C?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.