2 layers80 × 75 mm
Planta control
cesar191/diseno_PCB
diseño de una pcb de control el cual puede tener diferentes estructuras
55 parts
2 layers118.1 × 74.9 mm
LED Dimmer
settinger/LED-command-centerKiCad repo for my first ever panel-mount project
- Size
- 118.1 × 74.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 61
- Pads
- 211
- Tracks, vias
- 523, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Jun 2017
- Updated
- 3 Jul 2017
Overview
LED Dimmer is an open-source printed circuit board by settinger, from the settinger/LED-command-center repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 118.1 × 74.9 mm with 82 parts on 61 nets, routed with 523 tracks and 2 vias.
It is built around the LM358, LM555N and TIP31C. Its parts include 40 resistors, 12 switches, 6 transistors, 4 ICs and 4 connectors.
Main components
3
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
LM555N
DIP-80℃~+70℃ 4.5V~16V DIP-8 555 Timers / Counters ROHSHGSEMITimers / Counters
TIP31C
TO-220-65℃~+150℃ 1 NPN 1.2V 10 100V 300uA 3A 40W 5V NPN TO-220 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 3k3 | led_dimmer_footprints:R_Axial | R2, R3, R4, R5, R10, R11, R12, R13, R14, R15, R18, R19, R20, R21, R22, R23 +2 |
| 12 | SW_SPDT | led_dimmer_footprints:SW_SPDT_PCBPM | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12 |
| 8 | TEST | led_dimmer_footprints:test_pt_alt | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 6 | 10k | led_dimmer_footprints:R_Axial | R1, R9, R17, R28, R29, R30 |
| 3 | 1k5 | led_dimmer_footprints:R_Axial | R25, R26, R27 |
| 3 | LM358 | led_dimmer_footprints:DIP8_dualopamp | U1, U2, U3 |
| 3 | N/C | led_dimmer_footprints:R_Axial | R8, R16, R24 |
| 3 | TIP31C | led_dimmer_footprints:TO-220_Vertical | Q1, Q2, Q3 |
| 2 | 100k | led_dimmer_footprints:R_Axial | R37, R38 |
| 2 | 1k | led_dimmer_footprints:R_Axial | R39, R40 |
| 2 | 33k | led_dimmer_footprints:R_Axial | R34, R35 |
| 2 | Q_PNP_EBC | led_dimmer_footprints:TO-92_Molded_Wide | Q4, Q5 |
| 1 | 10n | led_dimmer_footprints:C_Disc | C1 |
| 1 | 1N4148 | led_dimmer_footprints:D_axial | D2 |
| 1 | 300 | led_dimmer_footprints:R_Axial | R33 |
| 1 | 330 | led_dimmer_footprints:R_Axial | R31 |
| 1 | 360 | led_dimmer_footprints:R_Axial | R32 |
| 1 | 43k | led_dimmer_footprints:R_Axial | R36 |
| 1 | 500K | led_dimmer_footprints:POT_UM_296RE | RV1 |
| 1 | Blue Load | led_dimmer_footprints:2.1ID_5.5OD_SIDE_MOUNT_JACK | P3 |
| 1 | Green Load | led_dimmer_footprints:2.1ID_5.5OD_SIDE_MOUNT_JACK | P2 |
| 1 | LED_RABG | led_dimmer_footprints:LED_D5.0mm-4 | D1 |
| 1 | LM555N | led_dimmer_footprints:DIP8 | U4 |
| 1 | PWR | led_dimmer_footprints:2.1ID_5.5OD_SIDE_MOUNT_JACK | P4 |
| 1 | Q_NPN_EBC | led_dimmer_footprints:TO-92_Molded_Wide | Q6 |
| 1 | Red Load | led_dimmer_footprints:2.1ID_5.5OD_SIDE_MOUNT_JACK | P1 |
The 78 most common of 82 parts.
Questions
How big is the LED Dimmer PCB?
It measures 118.1 × 74.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LED Dimmer use?
82 parts, built around the LM358, LM555N and TIP31C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LED Dimmer KiCad files?
From the settinger/LED-command-center repository on GitHub, at the commit this page was made from: the board is LED Dimmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LED Dimmer design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers96.5 × 94 mm
Linear supply
anshu-patra/pcb_design
a linear voltage power supply which takes in 220v and 50hz ac as input and converts it into a linera voltage power supply of 5V and 2A stable supply and also contains a foldback short circuit protection
21 partsMIT - 2 layers209 × 139.5 mm
PEH PCB
jodhsinghnahal/piezo_matlab
Simulation, circuit and PCB design repository for investigating piezoelectric energy harvesting (PEH) interfaces under conventional vibration excitation and underwater acoustic excitation.
27 parts - 2 layers75 × 45 mm
KiCad Design Files
norisionut12/12V-Class-AB-Audio-Amplifier
Discrete 12V single-supply Class AB audio amplifier with active-low relay speaker protection and linear voltage regulator.
34 partsMIT - 2 layers110 × 100 mm
SchematicPLC V0.1
nxvxr14/control-celda-fts-mecatronica-UNAB
IMPLEMENTACIÓN DE UN SISTEMA PARA CONTROL DE SUPERVISIÓN Y ADQUISICIÓN DE DATOS DE LA CELDA MECATRÓNICA DE FISCHERTECHNIK DEL LABORATORIO DE AUTOMATIZACIÓN UTILIZANDO HARDWARE Y SOFTWARE LIBRE
189 parts - 2 layers90 × 55 mm
- 2 layers226.4 × 128.4 mm
Bab top
trublion/turtable_control_board_hbridge
HW control board for turntable. Controls a DC motor with a H-bridge, reads an analog audio signal envelope, dual-PCB design.
109 partsMIT - 2 layers97.8 × 67.1 mm
Transmitter
ivanahepjuk/analog_laser_transmitter_receiver
Schematis and pcbs, Analog laser audio transmitting system. Pulse-width modulation, then detected by colour LEDs and filtered by analog filters.
75 parts6