Skip to the content
4 layers45.7 × 16.5 mmLm399-stick, the printed circuit board in 3D

A small, pluggable 7V LM399 reference module.

Size
45.7 × 16.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
15
Nets
6
Pads
32
Tracks, vias
119, 0
Pours
3
Routed
Yes
KiCad
KiCad 3
Created
28 Mar 2018
Updated
29 Aug 2022

Overview

Lm399-stick is an open-source printed circuit board by cellularmitosis, from the cellularmitosis/lm399-stick repository on GitHub, published under the MIT licence. It is a 4-layer board of 45.7 × 16.5 mm with 15 parts on 6 nets, routed with 119 tracks and 0 vias.

It is built around the OP07 and LM399AH. Its parts include 5 connectors, 4 capacitors, 3 resistors and 2 ICs.

Main components

2

README

README.md

lm399-stick

LM399, on a stick!!!

Latest release: v1.3

Parts

15
QtyValueFootprintReferences
4CONN_1X11pin_056_079P1, P2, P3, P4
30.1uFANYSSCAP_SMALL_2_059B_0805C1, C2, C3
110nFANYSSCAP_SMALL_2_059B_0805C4
11kR_AXIAL_0W25_059A_PLR1
122kR_AXIAL_0W25_059A_PLR3
13k3R_AXIAL_0W25_059A_PLR2
1CONN_2X1SIL-2P5
1LM399ATO-46-PLASTICU1
1OP07DIP8_059A_PLU2
1OSHW-logo_silkscreen-front_4mmOSHW-logo_silkscreen-front_4mmG***

Similar boards

  • 2 layers130 × 80 mmSmu main 1, the printed circuit board in 3D

    Smu main 1

    jaromir-sukuba/J-SMU

    DIY source-measure unit

    210 parts244
  • 2 layers118 × 103.5 mmEV Charger2, the printed circuit board in 3D

    EV Charger2

    fotherja/EV_Charger

    Arduino Uno Code for EV Charger

    62 parts167MIT
  • 2 layers144.8 × 88.9 mmPotentiostat, the printed circuit board in 3D

    Potentiostat

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    142 parts57CC-BY-4.0
  • 2 layers256 × 121 mmForte PA Deck, the printed circuit board in 3D

    Forte PA Deck

    SP6GK/Forte-600-HF-RF-Amplifier

    Project of 600 W LDMOS amlifier based on 2xMRF300.

    170 parts17GPL-3.0
  • 2 layers71 × 51 mmLetitrain, the printed circuit board in 3D

    Letitrain

    bseibold/letitrain

    An ESP32 board intended for use with TL-136 level sensors

    47 parts5MIT
  • 2 layers245.6 × 85.9 mmMycelium pcb, the printed circuit board in 3D

    Mycelium pcb

    microresearch/mycelium

    134 parts5GPL-3.0
  • 2 layers114 × 95 mmVCU V3.2, the printed circuit board in 3D

    VCU V3.2

    HKUST-Red-Bird-Racing-EVRT/GEN5_ELEC

    Repository for RBR EVRT 2025 EE

    170 parts3
  • 4 layers70 × 70.5 mmPCB FINAL UPDATED, the printed circuit board in 3D

    PCB FINAL UPDATED

    bash227/ECG-Motor-Control-Power-Management-PCB

    A multi-function PCB integrating biomedical signal acquisition (ECG), DC motor control, and advanced power management for wearable applications.

    111 parts2MIT

Questions

How big is the Lm399-stick PCB?

It measures 45.7 × 16.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Lm399-stick use?

15 parts, built around the OP07 and LM399AH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lm399-stick KiCad files?

From the cellularmitosis/lm399-stick repository on GitHub, at the commit this page was made from: the board is kicad/lm399-stick.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lm399-stick design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).