2 layers25.4 × 19 mm
Can module
ryanhaus/rowan-baja-daq
Data Acquisition system for Rowan University's Baja SAE 2025-2027 team.
49 parts1GPL-3.0
2 layers27.7 × 26.9 mm
USBPD
cdg66/FUSB302_PCB1Yet an other FUSB302 breakout board. I did it using only std kicad lib so it is ready to be implemented in your own project.
- Size
- 27.7 × 26.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 19
- Pads
- 90
- Tracks, vias
- 182, 21
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Sep 2022
- Updated
- 17 Nov 2023
Overview
USBPD is an open-source printed circuit board by cdg66, from the cdg66/FUSB302_PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 27.7 × 26.9 mm with 22 parts on 19 nets, routed with 182 tracks and 21 vias.
It is built around the FUSB302BMPX and DESD5V0U1BA-7-ES. Its parts include 6 capacitors, 5 resistors, 4 diodes, 4 connectors and 1 IC. It belongs with the power boards of this library.
Main components
2
FUSB302BMPX
WFQFN-14(2.5x2.5)-40℃~+125℃ 2.8V~5.5V 25uA Controller USB 3.1 WFQFN-14(2.5x2.5) USB Converters ROHSonsemiUSB Converters
DESD5V0U1BA-7-ES
SOD-323-40℃~+125℃ 0.8pF 1 15A@8/20us 1uA 20V 400W@8/20us 5V 6.5V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-4 SOD-323 ESD and Surge Protection (TVS/ESD) ROHSElecSuperESD And Surge Protection (TVS/ESD)
README
README.mdView this project on CADLAB.io.
FUSB302_PCB
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C6, C7, C8 |
| 4 | DESD5V0U1BA-7 | Diode_SMD:D_SOD-323 | D1, D2, D3, D4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | FUSB302BMPX | Package_DFN_QFN:WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J2 |
Similar boards
- 4 layers166.6 × 77.8 mm
- 4 layers143.1 × 150.7 mm
- 4 layers180 × 180 mm
Tractor VCU
laurapreidewe/Agriculture-VCU_v1
STM32 based Vehicle control unit (VCU) PCB for agricultural machinery. Made with KiCad 8, now updated to KiCad 10
208 parts - 4 layers176.5 × 184.2 mm
UGV Control Unit
laurapreidewe/Agriculture-VCU_v2
Vehicle control unit PCB for agricultural robots and machineries, built around Nuvoton M467HJHAN. Designed in KiCad 8 and updated to KiCad 10, with Ethernet, CAN, UART, ADC/DAC, PWM, and six relay channels.
273 parts - 2 layers78.7 × 69.3 mm
- 4 layers40.6 × 17.8 mm
- 2 layers43.2 × 17.6 mm
Questions
How big is the USBPD PCB?
It measures 27.7 × 26.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the USBPD use?
22 parts, built around the FUSB302BMPX and DESD5V0U1BA-7-ES. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USBPD KiCad files?
From the cdg66/FUSB302_PCB repository on GitHub, at the commit this page was made from: the board is USBPD.kicad_pcb and its schematic USBPD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USBPD design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).