Skip to the content
4 layers166.6 × 77.8 mmGT Wheel, the printed circuit board in 3D
Size
166.6 × 77.8 mm
Copper layers
4
Thickness
1.6 mm
Parts
169
Nets
119
Pads
504
Tracks, vias
134, 20
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
1 Jul 2023
Updated
15 Feb 2024

Overview

GT Wheel is an open-source printed circuit board by Ibakha, from the Ibakha/GT-Wheel-PCB repository on GitHub, published under the CC0-1.0 licence. It is a 4-layer board of 166.6 × 77.8 mm with 169 parts on 119 nets, routed with 134 tracks and 20 vias.

It is built around the AP2112K-3.3, WS2812B and BAT43W-TP, with the SKSTAJE010, PEC11H-4015F-S0016 and DESD5V0U1BA-7-ES among its other parts. Its parts include 50 capacitors, 39 diodes, 36 resistors, 8 switches and 4 connectors. It belongs with the STM32 boards of this library.

Main components

8

README

README.md

GT-Wheel-Main-PCB

Parts

169
QtyValueFootprintReferences
44100nF-CER-25V-0402Capacitor_SMD:C_0402_1005MetricC1, C2, C3, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33 +28
3310kR-SMD-100mW-0603Resistor_SMD:R_0603_1608MetricR2, R10, R11, R12, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32 +17
22WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmLED1, LED2, LED3, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22 +6
22~WIRE-POINT:WP 24AWGWP1, WP2, WP3, WP10, WP11, WP12, WP13, WP14, WP15, WP16, WP17, WP18, WP19, WP20, WP21, WP22 +6
14BAT43W-TPDiode_SMD:D_SOD-123D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17
6SKSTAJE010SWITCH-SMD-TACTILE:SKSTAJE010SW1, SW2, SW3, SW4, SW5, SW6
4PEC11H-4015F-S0016SWITCH-THT-ENC:PEC11H-4015F-S0016ENC1, ENC2, ENC3, ENC4
3DESD5V0U1BA-7Diode_SMD:D_SOD-323D1, D2, D3
20532610871CONN-SMD-RECT:0532610871 8POS P1.25J5, J6
2100kR-SMD-100mW-0603Resistor_SMD:R_0603_1608MetricR1, R3
210uF-CER-25V-0805Capacitor_SMD:C_0805_2012MetricC9, C10
2MPZ1608S601ATA00Inductor_SMD:L_0603_1608MetricLF1, LF2
2c=1uCapacitor_SMD:C_0805_2012MetricC48, C49
2~SWITCH-THT-FUNKY:RKJXT1F42001SW7, SW8
2~Capacitor_SMD:C_0201_0603MetricC6, C7
10532610471CONN-SMD-RECT:0532610471 4POS P1.25J3
132MHzCrystal:Crystal_SMD_EuroQuartz_X22-4Pin_2.5x2.0mmX1
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U3
1DLW21HN900SQ2LIND-SMD-CHOKE:FIL_DLW21HN900SQ2LL1
1STM32F303RETxPackage_QFP:LQFP-64_10x10mm_P0.5mmU1
1TC2050Connector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_VerticalJ2
1r=663Resistor_SMD:R_0603_1608MetricR20

More from Ibakha/GT-Wheel-PCB

1

Similar boards

  • 4 layers143.1 × 150.7 mmIbakey52, the printed circuit board in 3D

    Ibakey52

    Ibakha/ibakey52

    ZMK Split keyboard

    200 partsMIT
  • 2 layers113.4 × 56 mmMotherboard 2layers, the printed circuit board in 3D

    Motherboard 2layers

    hackclub/forge-printer

    Open source 3D printer

    49 parts19GPL-3.0
  • 2 layers53 × 30 mmRL78I1C PMOD PROG ADAPTOR ISO, the printed circuit board in 3D

    RL78I1C PMOD PROG ADAPTOR ISO

    lwray-renesas/RL78-I1C-PMOD-Programming-Adaptor---Isolated

    This piece of hardware alows connection between an E2-Lite and any of the RL78/I1C Metering PMOD's. Providing 5kv isolation.

    28 parts1MIT
  • 2 layers130 × 118.3 mmBreakout, the printed circuit board in 3D

    Breakout

    HalenR/hw_design

    Designs for PCB's

    85 parts
  • 2 layers27.7 × 26.9 mmUSBPD, the printed circuit board in 3D

    USBPD

    cdg66/FUSB302_PCB

    Yet an other FUSB302 breakout board. I did it using only std kicad lib so it is ready to be implemented in your own project.

    22 parts1MIT
  • 2 layers25.4 × 19 mmCan module, the printed circuit board in 3D

    Can module

    ryanhaus/rowan-baja-daq

    Data Acquisition system for Rowan University's Baja SAE 2025-2027 team.

    49 parts1GPL-3.0
  • 4 layers180 × 180 mmTractor VCU, the printed circuit board in 3D

    Tractor VCU

    laurapreidewe/Agriculture-VCU_v1

    STM32 based Vehicle control unit (VCU) PCB for agricultural machinery. Made with KiCad 8, now updated to KiCad 10

    208 parts
  • 4 layers176.5 × 184.2 mmUGV Control Unit, the printed circuit board in 3D

    UGV Control Unit

    laurapreidewe/Agriculture-VCU_v2

    Vehicle control unit PCB for agricultural robots and machineries, built around Nuvoton M467HJHAN. Designed in KiCad 8 and updated to KiCad 10, with Ethernet, CAN, UART, ADC/DAC, PWM, and six relay channels.

    273 parts

Questions

How big is the GT Wheel PCB?

It measures 166.6 × 77.8 mm and has 4 copper layers, 1.6 mm thick.

What parts does the GT Wheel use?

169 parts, built around the AP2112K-3.3, WS2812B, BAT43W-TP and SKSTAJE010. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GT Wheel KiCad files?

From the Ibakha/GT-Wheel-PCB repository on GitHub, at the commit this page was made from: the board is GT-Wheel-Main-PCB/GT-Wheel.kicad_pcb and its schematic GT-Wheel-Main-PCB/GT-Wheel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the GT Wheel design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).