2 layers50.8 × 50.8 mm
SolarDataLogger PCB
Lopfi/solar-logger
This is a simple box with an ESP32 with a LC12S, build to replace a DataBox24G from All of Solar, which communicates with a solar inverter to collect data on power generation.
25 parts4
2 layers482.6 × 44.6 mm
RACK ESP32S3
ccadic/ESP32S3RACKPCB6This is a 1U rack PCB to hold 8 x ESP32S3 Wroom chips.
- Size
- 482.6 × 44.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 188
- Nets
- 373
- Pads
- 965
- Tracks, vias
- 1,685, 280
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Apr 2023
- Updated
- 16 Apr 2023
Overview
RACK ESP32S3 is an open-source printed circuit board by ccadic, from the ccadic/ESP32S3RACKPCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 482.6 × 44.6 mm with 188 parts on 373 nets, routed with 1,685 tracks and 280 vias.
It is built around the ME6211C33M5G-N and WS2812B. Its parts include 64 capacitors, 64 resistors, 9 connectors and 8 ICs. It belongs with the ESP32 boards of this library.
Main components
2
ME6211C33M5G-N
SOT-23-5-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdESP32S3RACKPCB
This is a 1U rack PCB to hold 8 x ESP32S3 Wroom chips.
You have the STEP file, solidworks files, Kicad files and gerbers @sulfuroid
My USDT address: 0xA7Cb711124e1Be5cad35aABB5d8a29b6dfdfc594 for coffees...
Parts
188| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C11, C16, C17, C19, C24, C25, C27, C32, C33, C35, C40, C41, C43, C48, C49 +8 |
| 16 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C14, C15, C22, C23, C30, C31, C38, C39, C46, C47, C54, C55, C62, C63 |
| 16 | 20pF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C10, C13, C18, C21, C26, C29, C34, C37, C42, C45, C50, C53, C58, C61 |
| 16 | 22R | Resistor_SMD:R_0603_1608Metric | R1, R2, R9, R10, R17, R18, R23, R24, R29, R30, R35, R36, R41, R42, R47, R48 |
| 16 | 4.7k | Resistor_SMD:R_0603_1608Metric | R4, R8, R11, R13, R14, R16, R19, R22, R25, R28, R31, R34, R37, R40, R43, R46 |
| 16 | 5.1k | Resistor_SMD:R_0603_1608Metric | R49, R50, R51, R52, R53, R54, R55, R56, R57, R58, R59, R60, R61, R62, R63, R64 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R6, R12, R20, R26, R32, R38, R44 |
| 8 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C12, C20, C28, C36, C44, C52, C60 |
| 8 | 470 | Resistor_SMD:R_0603_1608Metric | R5, R7, R15, R21, R27, R33, R39, R45 |
| 8 | ME6211C33M5G-N | Package_TO_SOT_SMD:SOT-23-5 | ESP1-U1, ESP2-U2, ESP3-U2, ESP4-U2, ESP5-U1, ESP6-U2, ESP7-U2, ESP8-U2 |
| 8 | USB_C_Receptacle | 18650:GT-USB-7010 | J1, J2, J3, J4, J5, J6, J7, J8 |
| 8 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | ESP1-D1, ESP2-D1, ESP3-D1, ESP4-D1, ESP5-D1, ESP6-D1, ESP7-D1, ESP8-D1 |
| 3 | MountingHole | MountingHole:MountingHole_3.5mm | H1, H2, H3 |
| 1 | 5V power supply | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J9 |
| 1 | ESP1-BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP1-SW2 |
| 1 | ESP1-ESP32S3-Wroom | 18650:ESP32-S3-WROOM-1 | ESP1-U2 |
| 1 | ESP1-RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP1-SW1 |
| 1 | ESP2-BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP1-SW3 |
| 1 | ESP2-ESP32S3-Wroom | 18650:ESP32-S3-WROOM-1 | ESP2-U1 |
| 1 | ESP2-RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP2-SW1 |
| 1 | ESP3-BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP3-SW1 |
| 1 | ESP3-ESP32S3-Wroom | 18650:ESP32-S3-WROOM-1 | ESP3-U1 |
| 1 | ESP3-RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP3-SW2 |
| 1 | ESP4-BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP4-SW1 |
| 1 | ESP4-ESP32S3-Wroom | 18650:ESP32-S3-WROOM-1 | ESP4-U1 |
| 1 | ESP4-RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP4-SW2 |
| 1 | ESP5-BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP5-SW1 |
| 1 | ESP5-ESP32S3-Wroom | 18650:ESP32-S3-WROOM-1 | ESP5-U3 |
| 1 | ESP5-RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP5-SW2 |
| 1 | ESP6-BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP6-SW3 |
| 1 | ESP6-ESP32S3-Wroom | 18650:ESP32-S3-WROOM-1 | locked |
| 1 | ESP6-RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP6-SW1 |
| 1 | ESP7-BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP7-SW1 |
| 1 | ESP7-ESP32S3-Wroom | 18650:ESP32-S3-WROOM-1 | ESP7-U1 |
| 1 | ESP7-RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP7-SW2 |
| 1 | ESP8-BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP8-SW1 |
| 1 | ESP8-ESP32S3-Wroom | 18650:ESP32-S3-WROOM-1 | ESP8-U1 |
| 1 | ESP8-RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | ESP8-SW2 |
| 1 | OLED12832-ESP1 | 18650:OLED-0.91-128x32 | U1 |
| 1 | OLED12832-ESP2 | 18650:OLED-0.91-128x32 | U2 |
| 1 | OLED12832-ESP3 | 18650:OLED-0.91-128x32 | U3 |
| 1 | OLED12832-ESP4 | 18650:OLED-0.91-128x32 | U4 |
| 1 | OLED12832-ESP5 | 18650:OLED-0.91-128x32 | U5 |
| 1 | OLED12832-ESP6 | 18650:OLED-0.91-128x32 | U6 |
| 1 | OLED12832-ESP7 | 18650:OLED-0.91-128x32 | U7 |
| 1 | OLED12832-ESP8 | 18650:OLED-0.91-128x32 | U8 |
Similar boards
- 2 layers80 × 60 mm
PCB Reflow Hot Plate
bjkayani/PCB-Reflow-Hot-Plate
The PCB Reflow Hot Plate is a temperature controlled 120 x 70 mm hot plate designed to reflow solder SMD circuit boards.
70 parts1 - 2 layers87.6 × 50.8 mm
- 2 layers29.6 × 15.8 mm
BLEBOMB
rdhrobotics/BleBomB-Hardware
BleBomB is a compact embedded 2.4 GHz RF noise generator based on NRF24L01+ and MM32G0001A1T. Includes KiCad schematic, PCB, and Gerber files.
24 parts - 2 layers188.5 × 167.3 mm
Panel2
sean618/MakerTiles
Modular STM32 electronic-tile system: hardware, firmware, the MicroBus + Field Protocol stack, and a Python daemon.
585 partsMIT - 2 layers87.8 × 59.8 mm
FreeDeck SMD 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
37 parts772 - 2 layers83.2 × 40 mm
- 2 layers35.4 × 27 mm
Questions
How big is the RACK ESP32S3 PCB?
It measures 482.6 × 44.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RACK ESP32S3 use?
188 parts, built around the ME6211C33M5G-N and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RACK ESP32S3 KiCad files?
From the ccadic/ESP32S3RACKPCB repository on GitHub, at the commit this page was made from: the board is RACK-ESP32S3.kicad_pcb and its schematic RACK-ESP32S3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RACK ESP32S3 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).