
SolarDataLogger PCB
Lopfi/solar-logger
This is a simple box with an ESP32 with a LC12S, build to replace a DataBox24G from All of Solar, which communicates with a solar inverter to collect data on power generation.

Automatic door for chicken huts
Egg portal is an open-source printed circuit board by Lopfi, from the Lopfi/egg-portal repository on GitHub, published under the MIT licence. It is a 2-layer board of 87.6 × 50.8 mm with 34 parts on 52 nets, routed with 244 tracks and 360 vias.
It is built around the ESP32-S2-SOLO-N4R2, ME6211C33M5G-N and WS2812B. Its parts include 9 capacitors, 7 resistors, 5 connectors, 3 ICs and 2 switches. It belongs with the ESP32 boards of this library.
Automatic door for chicken huts
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8, C9 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6, R7 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | (10k) | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 78M05 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | ESP32-S2-SOLO-N4R2 | SamacSys_Parts:ESP32S2SOLON4R2 | IC1 |
| 1 | FLASH | SamacSys_Parts:TS1187ABAB | SW1 |
| 1 | LOGO | LOGO | G*** |
| 1 | ME6211C33M5G-N | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | POWER | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | Pololu_Breakout_A4988 | robins-parts:A4988 | A1 |
| 1 | RESET | SamacSys_Parts:TS1187ABAB | SW2 |
| 1 | SCHWITCH_2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | SWITCH_1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | USB_C_Receptacle_USB2.0 | CustomComponents:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | ~ | robins-parts:NEO-6M_GPS | M1 |

Lopfi/solar-logger
This is a simple box with an ESP32 with a LC12S, build to replace a DataBox24G from All of Solar, which communicates with a solar inverter to collect data on power generation.


RonishNadar/open-01
OPEN-01 - Omnidirectional Perception & Embedded Navigation. An open-source, low-cost ROS2 robot platform.


ccadic/ESP32S3RACKPCB
This is a 1U rack PCB to hold 8 x ESP32S3 Wroom chips.

bjkayani/PCB-Reflow-Hot-Plate
The PCB Reflow Hot Plate is a temperature controlled 120 x 70 mm hot plate designed to reflow solder SMD circuit boards.

rdhrobotics/BleBomB-Hardware
BleBomB is a compact embedded 2.4 GHz RF noise generator based on NRF24L01+ and MM32G0001A1T. Includes KiCad schematic, PCB, and Gerber files.

sean618/MakerTiles
Modular STM32 electronic-tile system: hardware, firmware, the MicroBus + Field Protocol stack, and a Python daemon.
It measures 87.6 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the ESP32-S2-SOLO-N4R2, ME6211C33M5G-N and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Lopfi/egg-portal repository on GitHub, at the commit this page was made from: the board is hardware/pcb/egg-portal.kicad_pcb and its schematic hardware/pcb/egg-portal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).