

GettingToBlinky5.0
- Size
- 32 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 7
- Pads
- 21
- Tracks, vias
- 27, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Sep 2019
- Updated
- 5 Oct 2019
Overview
GettingToBlinky5.0 is an open-source printed circuit board by cbyrd01, from the cbyrd01/GettingToBlinky5.0 repository on GitHub. It is a 2-layer board of 32 × 30 mm with 7 parts on 7 nets, routed with 27 tracks and 5 vias.
It is built around the CR2032. Its parts include 3 resistors, 1 capacitor, 1 IC and 1 diode.
Main components
1README
README.mdGettingToBlinky5.0
Following along with Contextual Electronics Getting To Blinky 5.0 video series
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R3 |
| 1 | 1U | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 470K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 7555 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | CR2032 | GettingToBlinky5:S8211-46R | BT1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
Similar boards
- 2 layers333.4 × 149.9 mm

- 2 layers17.2 × 30.4 mm

- 4 layers188 × 188 mm

- 2 layers61 × 36.8 mm

- 2 layers59.2 × 41 mm

- 2 layers35 × 35 mm

- 2 layers90 × 89.4 mm

- 2 layers170.2 × 100 mm

Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0
Questions
How big is the GettingToBlinky5.0 PCB?
It measures 32 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GettingToBlinky5.0 use?
7 parts, built around the CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GettingToBlinky5.0 KiCad files?
From the cbyrd01/GettingToBlinky5.0 repository on GitHub, at the commit this page was made from: the board is GettingToBlinky5.0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GettingToBlinky5.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask cbyrd01 before reusing the design.