Skip to the content
2 layers30.1 × 69.8 mmStoreyPeak QSFP IO, the printed circuit board in 3D

StoreyPeak QSFP IO

carlosedp/QSFP-HDMI6

This repository contains two KiCad subprojects for the QSFP to HDMI breakout boards. These subprojects are designed to facilitate the conversion of QSFP signals to HDMI.

Size
30.1 × 69.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
63
Pads
136
Tracks, vias
215, 21
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
24 Sep 2024
Updated
24 Sep 2024

Overview

StoreyPeak QSFP IO is an open-source printed circuit board by carlosedp, from the carlosedp/QSFP-HDMI repository on GitHub. It is a 2-layer board of 30.1 × 69.8 mm with 21 parts on 63 nets, routed with 215 tracks and 21 vias.

It is built around the FT232RL. Its parts include 10 capacitors, 4 resistors, 2 ICs, 2 diodes and 2 connectors.

Main components

1

README

Readme.md

QSFP to HDMI Breakout Boards

This repository contains two KiCad subprojects for the QSFP to HDMI breakout boards. These subprojects are designed to facilitate the conversion of QSFP signals to HDMI.

The concept has been created to be used on the Microsoft Stratix V FPGA accelerator card "Storey Peak". Jan Marjanovic has created a series of posts about the analysis of the card:

The project was not tested or manufactured yet.

Subprojects

1. QSFP breakout board

The project is just a breakout board for the QSFP connector allowing connection to the QSFP on the FPGA board.

PCB

2. QSFP to HDMI and UART Adapter

This subproject focuses on the design and implementation of an adapter that converts QSFP signals to HDMI. The key features include:

  • QSFP connector for input signals
  • HDMI connector for output signals
  • UART connector for debugging and monitoring
  • 2 push buttons for user interaction
  • 2 LEDs for visual feedback

PCB_1

PCB_2

Contributing

Contributions are welcome! Please fork the repository and submit a pull request with your improvements.

License

This project is licensed under the MIT License. See the LICENSE file for details.

Parts

21
QtyValueFootprintReferences
8220nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC3, C4, C5, C6, C7, C8, C9, C10
247Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR7, R8
24k7Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2
10.1uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1
110uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2
1FT232RLPackage_SO:SSOP-28_5.3x10.2mm_P0.65mmU2
1HDMI_A_1.4CarlosEDP_Lib:CONN-10029449-111RLFJ2
1Polyfuse_SmallFuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolderF1
1QSFP_PCB-QSFPCarlosEDP_Lib:QSFP_PCBU1
1RXLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
1TXLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD2
1USB_B_MicroCarlosEDP_Lib:USB_Micro-B_Molex-105017-0001J1

Similar boards

  • 2 layers68.8 × 53.6 mmZArduino, the printed circuit board in 3D

    ZArduino

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    46 parts269
  • 2 layers80.1 × 56.9 mmKwp1281tool, the printed circuit board in 3D

    Kwp1281tool

    mnaberez/vwradio

    Reverse engineering Volkswagen car radios

    33 parts133BSD-3-Clause
  • 2 layers45 × 69 mmUsbavrfloppy, the printed circuit board in 3D

    Usbavrfloppy

    jtsiomb/usbamigafloppy

    USB floppy controller for Amiga disks

    25 parts69CC-BY-SA-4.0
  • 2 layers100 × 71.8 mmBrutzelkarte, the printed circuit board in 3D

    Brutzelkarte

    jago85/Brutzelkarte_PCB

    Brutzelkarte - N64 Flash Cart PCB (KiCad)

    106 parts67GPL-3.0
  • 2 layers132.5 × 38 mmEmfi, the printed circuit board in 3D

    Emfi

    Ledger-Donjon/silicon-toaster

    SiliconToaster is an open-source hardware electromagnetic fault injection device, designed for hardware security research. It has the following features:

    81 parts60LGPL-3.0
  • 2 layers22 × 66.5 mmKbxIrBlaster, the printed circuit board in 3D

    KbxIrBlaster

    kbx81/kbxIRBlaster

    ESP32-based IR MegaBlaster!

    106 parts58CC-BY-SA-4.0
  • 2 layers104.7 × 55.6 mmLab1, the printed circuit board in 3D

    Lab1

    jsjolund/dmx512-controller-board

    Controller board for DMX512 compatible devices, built around the STM32F4 processor

    96 parts26
  • 2 layers95 × 85 mmAMBE3003USB, the printed circuit board in 3D

    AMBE3003USB

    phl0/AMBE3003USB

    AMBE 3003 USB PCB

    211 parts18

Questions

How big is the StoreyPeak QSFP IO PCB?

It measures 30.1 × 69.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the StoreyPeak QSFP IO use?

21 parts, built around the FT232RL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the StoreyPeak QSFP IO KiCad files?

From the carlosedp/QSFP-HDMI repository on GitHub, at the commit this page was made from: the board is StoreyPeak-QSFP-IO/StoreyPeak-QSFP-IO.kicad_pcb and its schematic StoreyPeak-QSFP-IO/StoreyPeak-QSFP-IO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the StoreyPeak QSFP IO design in my own project?

Its repository states no licence, so its author keeps all rights: ask carlosedp before reusing the design.