Skip to the content
2 layers156.8 × 127.4 mmSplit keyboard project, the printed circuit board in 3D

Split keyboard project

captaincarmnlg/spydr
Size
156.8 × 127.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
94
Nets
71
Pads
472
Tracks, vias
473, 102
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Jun 2025
Updated
7 Jun 2025

Overview

Split keyboard project is an open-source printed circuit board by captaincarmnlg, from the captaincarmnlg/spydr repository on GitHub. It is a 2-layer board of 156.8 × 127.4 mm with 94 parts on 71 nets, routed with 473 tracks and 102 vias.

It is built around the ATMEGA32U4-AU and 1N4148W. Its parts include 33 switches, 32 diodes, 12 capacitors, 4 resistors and 3 connectors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

Parts

94
QtyValueFootprintReferences
321N4148WDiode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +16
32SW_Push_45degkeyswitches:Kailh_socket_MX_reversible_platemountSW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24 +16
7MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4, H5, H6, H7
510nfCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C6, C7, C9, C11
2100nfCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2, C3
210kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R4
210ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C4
222RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R3
222pfCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC8, C10
116MHzOscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm_HandSolderingY1
11ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC12
1500mAFuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF1
1ATmega32U4-APackage_QFP:TQFP-44_10x10mm_P0.8mmU1
1AudioJack3realparts:Jack_PJ-398A-5A_PJ-399B-6AJ3
1Conn_02x03_Top_Bottomcustom:ICSPJ2
1SW_PushButton_Switch_SMD:SW_SPST_B3U-1000PSW1
1USB_B_MicroConnector_USB:USB_Micro-B_Amphenol_10118194-0001LF_HorizontalJ1

Similar boards

  • 2 layers243.9 × 136.5 mmBarobord, the printed circuit board in 3D

    Barobord

    sadekbaroudi/barobord

    I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!

    157 parts57
  • 2 layers247.7 × 127 mmEuclid36, the printed circuit board in 3D

    Euclid36

    sadekbaroudi/euclid36

    At the time of creation, using Kicad 5.1.9 - This may not work with future versions

    130 parts24
  • 2 layers298.8 × 122 mmUrsaminor pcb, the printed circuit board in 3D

    Ursaminor pcb

    markstory/ursa-minor-keyboard

    Design and schematics for the ursaminor keyboard

    225 parts23
  • 2 layers304.8 × 95.3 mm65 keyboard untitled, the printed circuit board in 3D

    65 keyboard untitled

    eightbitraptor/65_keyboard_untitled

    My as yet unnamed 65% keyboard design

    150 parts15
  • 2 layers271.5 × 81 mmShark50, the printed circuit board in 3D

    Shark50

    misterkeebs/Shark50

    107 parts9
  • 2 layers254 × 140 mmIndex tab, the printed circuit board in 3D

    Index tab

    Kyrremann/index-tab

    Hot-swappable 6x13 ortho keyboard

    191 parts8GPL-3.0
  • 2 layers315 × 121 mmSentry keyboard v1, the printed circuit board in 3D

    Sentry keyboard v1

    markstory/sentry-keyboard

    Replacement PCB for the gifted keyboards

    265 parts3MIT
  • 2 layers76.2 × 94.5 mmBpad, the printed circuit board in 3D

    Bpad

    brcopping/numpad

    numpad pcb design

    53 parts1

Questions

How big is the Split keyboard project PCB?

It measures 156.8 × 127.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Split keyboard project use?

94 parts, built around the ATMEGA32U4-AU and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Split keyboard project KiCad files?

From the captaincarmnlg/spydr repository on GitHub, at the commit this page was made from: the board is split-keyboard-project.kicad_pcb and its schematic MainKeyPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Split keyboard project design in my own project?

Its repository states no licence, so its author keeps all rights: ask captaincarmnlg before reusing the design.