
Barobord
sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!

Shark50 is an open-source printed circuit board by misterkeebs, from the misterkeebs/Shark50 repository on GitHub. It is a 2-layer board of 271.5 × 81 mm with 107 parts on 103 nets.
It is built around the ATMEGA32U4-AU and 1N4148W. Its parts include 45 diodes, 45 switches, 8 capacitors, 5 resistors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 45 | 1N4148W | Diodes_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +29 |
| 3 | 22pF | Capacitors_SMD:C_0805_HandSoldering | C1, C3, C4 |
| 2 | 100n | Capacitors_SMD:C_0805_HandSoldering | C7, C8 |
| 2 | 22 | Resistors_SMD:R_1206_HandSoldering | R2, R3 |
| 1 | ' | acheron_MX:MX100 | SW41 |
| 1 | / | acheron_MX:MX100 | SW39 |
| 1 | 10k | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C2 |
| 1 | 16MHz | Crystals:Crystal_SMD_5032-2pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | 1k | Resistors_SMD:R_1206_HandSoldering | R4 |
| 1 | 1u | Capacitors_SMD:C_0805_HandSoldering | C5 |
| 1 | 1uF | Capacitors_SMD:C_0805_HandSoldering | C6 |
| 1 | 330 | Resistors_SMD:R_1206_HandSoldering | R5 |
| 1 | ; | acheron_MX:MX100 | SW38 |
| 1 | < | acheron_MX:MX100 | SW35 |
| 1 | > | acheron_MX:MX100 | SW37 |
| 1 | A | acheron_MX:MX100 | SW18 |
| 1 | ATmega32U4-AU | acheron_Components:TQPF-44_10x10mm_P0.8mm | U1 |
| 1 | B | acheron_MX:MX100 | SW28 |
| 1 | BkSpc | acheron_MX:MX100 | SW14 |
| 1 | C | acheron_MX:MX100 | SW24 |
| 1 | D | acheron_MX:MX100 | SW23 |
| 1 | E | acheron_MX:MX100 | SW4 |
| 1 | Enter_175 | acheron_MX:MX175 | SW43 |
| 1 | Esc | acheron_MX:MX100 | SW1 |
| 1 | F | acheron_MX:MX100 | SW25 |
| 1 | Fn | acheron_MX:MX100 | SW44 |
| 1 | G | acheron_MX:MX100 | SW27 |
| 1 | H | acheron_MX:MX100 | SW30 |
| 1 | I | acheron_MX:MX100 | SW9 |
| 1 | J | acheron_MX:MX100 | SW32 |
| 1 | K | acheron_MX:MX100 | SW34 |
| 1 | L | acheron_MX:MX100 | SW36 |
| 1 | LAlt_125 | acheron_MX:MX125 | SW22 |
| 1 | LCtrl_125 | acheron_MX:MX125 | SW17 |
| 1 | LShift_175 | acheron_MX:MX175 | SW16 |
| 1 | M | acheron_MX:MX100 | SW33 |
| 1 | N | acheron_MX:MX100 | SW31 |
| 1 | O | acheron_MX:MX100 | SW10 |
| 1 | P | acheron_MX:MX100 | SW11 |
| 1 | Q | acheron_MX:MX100 | SW2 |
| 1 | R | acheron_MX:MX100 | SW5 |
| 1 | RAlt_125 | acheron_MX:MX125 | SW40 |
| 1 | RCtr_125 | acheron_MX:MX125 | SW45 |
| 1 | RShift_125 | acheron_MX:MX125 | SW42 |
| 1 | S | acheron_MX:MX100 | SW20 |
| 1 | SW_Push | acheron_Hardware:smdPushBtn | SWP1 |
| 1 | Space_7 | acheron_MX:MX700 | SW29 |
| 1 | T | acheron_MX:MX100 | SW6 |
| 1 | Tab_125 | acheron_MX:MX125 | SW15 |
| 1 | U | acheron_MX:MX100 | SW8 |
| 1 | USB_B_Mini | acheron_Connectors:USB_MiniB_XM7D-0512 | J1 |
| 1 | V | acheron_MX:MX100 | SW26 |
| 1 | W | acheron_MX:MX100 | SW3 |
| 1 | X | acheron_MX:MX100 | SW21 |
| 1 | Y | acheron_MX:MX100 | SW7 |
| 1 | Z | acheron_MX:MX100 | SW19 |
| 1 | [ | acheron_MX:MX100 | SW12 |
| 1 | ] | acheron_MX:MX100 | SW13 |

sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!

sadekbaroudi/euclid36
At the time of creation, using Kicad 5.1.9 - This may not work with future versions

markstory/ursa-minor-keyboard
Design and schematics for the ursaminor keyboard

eightbitraptor/65_keyboard_untitled
My as yet unnamed 65% keyboard design




It measures 271.5 × 81 mm and has 2 copper layers, 1.6 mm thick.
107 parts, built around the ATMEGA32U4-AU and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the misterkeebs/Shark50 repository on GitHub, at the commit this page was made from: the board is Shark50.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask misterkeebs before reusing the design.