2 layers122.5 × 87.6 mm
2 layers208.8 × 80.2 mm
TinyV pcb
calvin-mcd/tinyV-pcb5integrated pcb for the tinyV by BA (BAonDiscord7634)
- Size
- 208.8 × 80.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 113
- Nets
- 83
- Pads
- 603
- Tracks, vias
- 568, 35
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Aug 2023
- Updated
- 23 Feb 2024
Overview
TinyV pcb is an open-source printed circuit board by calvin-mcd, from the calvin-mcd/tinyV-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 208.8 × 80.2 mm with 113 parts on 83 nets, routed with 568 tracks and 35 vias.
Its parts include 38 diodes, 10 capacitors, 5 connectors, 3 resistors and 3 switches. It belongs with the RP2040 and STM32 boards of this library.
README
README.mdtinyV-pcb
This is an integrated, hotswap pcb for the tinyV by BA (BAonDiscord7634). It is designed to be snapped in half at the mousebites in the middle of the pcb. a single 9pin jst cable will then connect the two halves.
Layout
Pictures
Case
The case is being created by BA.
early design examples:
Todo
- order & test pcb
- create firmware
- order & test case prototype
Disclaimer
This PCB has been fully tested and confirmed to work. The members of the PCB development team are however not liable if you end up with a non-functional pcb. Order at your own risk. Support will not be provided but pull requests will be reviewed and possibly accepted.
License
Shield: 
This work is licensed under a
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Credits
Any questions, contact BAonDiscord7634 & Calvin0563 on Discord.
Parts
113| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_1u | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +24 |
| 38 | D_Small | Diode_SMD:D_SOD-123F | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +22 |
| 7 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G*** |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C9, C10 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C8 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x10_Socket | Connector_FFC-FPC:Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J4, J7 |
| 2 | MX_stab | PCM_marbastlib-mx:STAB_MX_2u | S1, S2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | Conn_01x03_Socket | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | JST SH | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | MCP1700x-330xxTT | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | Pico EZmate | Connector_Molex:Molex_Pico-EZmate_78171-0004_1x04-1MP_P1.20mm_Vertical | J2 |
| 1 | RST | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW1 |
| 1 | STM32F072C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
The 109 most common of 113 parts.
Similar boards
- 2 layers243.2 × 106 mm
- 2 layers294 × 100 mm
- 2 layers81.1 × 128.5 mm
- 2 layers247.1 × 121.4 mm
- 2 layers120 × 80 mm
Rx72t 100 pga usb
hirakuni45/RX
Renesas RX Microcontroller, C++ framework, Library, Sample
113 parts86BSD-3-Clause - 2 layers55 × 100 mm
- 2 layers191 × 118.7 mm
Questions
How big is the TinyV pcb PCB?
It measures 208.8 × 80.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TinyV pcb use?
113 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TinyV pcb KiCad files?
From the calvin-mcd/tinyV-pcb repository on GitHub, at the commit this page was made from: the board is Project/tinyv pcb.kicad_pcb and its schematic Project/tinyv pcb FFC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TinyV pcb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).