
Panel
calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

High-flexibility, low-cost mechatronics controller for 3D printers
Corevus m++ is an open-source printed circuit board by calithameridi, from the calithameridi/corevus repository on GitHub. It is a 4-layer board of 100 × 64 mm with 157 parts on 108 nets, routed with 1,015 tracks and 101 vias.
It is built around the TPS61040DBV and AMS1117-3.3. Its parts include 36 capacitors, 13 resistors, 6 connectors, 3 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Copyright 2024 by meridi (myself), all rights reserved until I decide on a suitable license
Corevus-G v0.6 printer mainboards are available for evaluation and beta testing. Join the discord:
discord (dot) gg (slash) W 5 m a f w 2 k Y h. See the Corevus-G v0.6 manual here for more information.
High performance, low-ish price control board for 3D printers.

(For older hardware releases, also see the CvG v0.4 manual)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 1μF 63V | Capacitor_SMD:C_1206_3216Metric | C17, C19, C20, C21, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32 |
| 12 | Gnd | corevus:LGA_Spring | T4, T11, T18, T25, T53, T54, T55, T56, T57, T58, T59, T60 |
| 9 | 1µF | AlphaLib:0402C | C8, C9, C10, C33, C34, C35, C36, C37, C38 |
| 8 | CS | corevus:LGA_Spring | T29, T30, T31, T32, T33, T34, T35, T36 |
| 8 | Dir | corevus:LGA_Spring | T45, T46, T47, T48, T49, T50, T51, T52 |
| 8 | En | corevus:LGA_Spring | T37, T38, T39, T40, T41, T42, T43, T44 |
| 8 | Stall | corevus:LGA_Spring | T69, T70, T71, T72, T73, T74, T75, T76 |
| 8 | Step | corevus:LGA_Spring | T61, T62, T63, T64, T65, T66, T67, T68 |
| 6 | 390μF 63V | corevus:CP_Radial_D12.5mm_P5.00mm | C11, C12, C13, C14, C15, C16 |
| 4 | 3.3V | corevus:LGA_Spring | T6, T13, T20, T27 |
| 4 | Gnd | corevus:M3_M2.5_PCB_Nut | H8, H10, H12, H14 |
| 4 | MISO | corevus:LGA_Spring | T5, T12, T19, T26 |
| 4 | MOSI | corevus:LGA_Spring | T3, T10, T17, T24 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | SClk | corevus:LGA_Spring | T2, T9, T16, T23 |
| 4 | Therm | corevus:LGA_Spring | T7, T14, T21, T28 |
| 4 | V_{M} | corevus:M3_M2.5_PCB_Nut | H7, H9, H11, H13 |
| 4 | V_{SA} | corevus:LGA_Spring | T1, T8, T15, T22 |
| 3 | 10kΩ | AlphaLib:0402R | R3, R5, R6 |
| 3 | 10μF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C7 |
| 2 | 10A | corevus:XF-506P | F1, F2 |
| 2 | 16pF | AlphaLib:0402C | C3, C4 |
| 2 | 2.2kΩ | AlphaLib:0402R | R1, R2 |
| 2 | 200kΩ | AlphaLib:0402R | R12, R13 |
| 2 | 33Ω | AlphaLib:0402R | R7, R8 |
| 2 | 5.1kΩ | AlphaLib:0402R | R9, R10 |
| 2 | Back | corevus:M3_M2.5_PCB_Nut | H5, H6 |
| 2 | Power In | corevus:Kefa_KF8500-8.5-2P | J4, J5 |
| 2 | Red | AlphaLib:0603LED | D1, D2 |
| 2 | XH | corevus:JST_XH_1x03 | J1, J2 |
| 1 | 100kΩ | AlphaLib:0402R | R4 |
| 1 | 10µH | corevus:L_Changjiang_FTC2520 | L1 |
| 1 | 10μF | AlphaLib:0603C | C5 |
| 1 | 1kΩ | AlphaLib:0402R | R11 |
| 1 | 1x2P | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | 25 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 4.7pF | AlphaLib:0402C | C6 |
| 1 | 5819 | Diode_SMD:D_SOD-323 | D3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BOOT | corevus:ShouHan_TS3315A | SW2 |
| 1 | RST | corevus:ShouHan_TS3315A | SW1 |
| 1 | STM32H750VBTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U3 |
| 1 | TPS61040DBV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USB 2.0 | corevus:USB_Type-C_16p | J3 |

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

Novin3dp/7inch-hdmi-screen
این برد دولایه (۶۸×۴۲ میلیمتر) همان پنل ۷ اینچ AT070TN92 و تاچ GT915 را این بار از پورت DSI رزبریپای راه میاندازد. نسخهی HDMI در پوشهی hardware/ دستنخورده باقی مانده است.


lyuboasenov/MxA
MxA is a portable BLE-enabled strain gauge that can be used for weight-free training as well as testing/assessment.

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.


plinkysynth/plinky_public
a public release of the plinky sw and hw


It measures 100 × 64 mm and has 4 copper layers, 1.6 mm thick.
157 parts, built around the TPS61040DBV and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the calithameridi/corevus repository on GitHub, at the commit this page was made from: the board is hardware/corevus-m++/corevus-m++.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask calithameridi before reusing the design.