2 layers100 × 70 mm
2 layers50 × 50 mm
Flashgordon
c-base/flashgordon1FLASH! AHHHHH!
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 57
- Pads
- 140
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 28 May 2016
- Updated
- 10 Sep 2016
Overview
Flashgordon is an open-source printed circuit board by c-base, from the c-base/flashgordon repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50 × 50 mm with 26 parts on 57 nets.
It is built around the LM2596S-3.3, FT2232HL and JUMPER3. Its parts include 10 capacitors, 4 resistors, 3 ICs, 3 connectors and 1 diode.
Main components
3
LM2596S-3.3
TO-263-5L-20℃~+70℃ 1 170kHz 2mA 3.3V 3A 4.5V~40V Buck Buck Built-in Fixed No TO-263-5L DC-DC Converters ROHSGRDC-DC Converters
FT2232HL
QFP64Dual High Speed USB to Multipurpose UART/FIFO ICFTDIUncategorisedJUMPER3
HDR-TH_3P-P2.54-L7.6-W2.5HDR-TH-3P-2.54mm New Arrivals ROHSWürth ElektronikUncategorised
README
README.mdflashgordon
FLASH! AHHHHH!
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitors_SMD:C_0805 | C3, C4, C5, C6, C7, C8, C9 |
| 2 | 27pF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C1, C2 |
| 2 | C | Capacitors_ThroughHole:C_Radial_D5_L6_P2.5 | 220uF1, 680uF1 |
| 1 | 10K | Resistors_SMD:R_0805 | R3 |
| 1 | 12K | Resistors_SMD:R_0805 | R1 |
| 1 | 12MHz | Crystals:Crystal_HC50-U_Vertical | Y1 |
| 1 | 1K | Resistors_SMD:R_0805 | R2 |
| 1 | 1N5824 | Diodes_ThroughHole:Diode_DO-35_SOD27_Horizontal_RM10 | D1 |
| 1 | 2.2K | Resistors_SMD:R_0805 | R4 |
| 1 | 3.3uF | Capacitors_SMD:C_0805 | C10 |
| 1 | 93CxxC | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | FT2232HL | Housings_QFP:LQFP-64_10x10mm_Pitch0.5mm | U1 |
| 1 | INDUCTOR | Choke_SMD:Choke_SMD_12x12mm_h8mm | L1 |
| 1 | JUMPER3 | Pin_Headers:Pin_Header_Straight_1x03 | JP1 |
| 1 | LM2596S-3.3 | TO_SOT_Packages_SMD:TO-263-5Lead | U2 |
| 1 | SPI-Clip | Pin_Headers:Pin_Header_Straight_2x05 | P2 |
| 1 | Thinkpad 20V Connector | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | P3 |
| 1 | USB_OTG | Connect:USB_Micro-B | P1 |
Questions
How big is the Flashgordon PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Flashgordon use?
26 parts, built around the LM2596S-3.3, FT2232HL and JUMPER3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flashgordon KiCad files?
From the c-base/flashgordon repository on GitHub, at the commit this page was made from: the board is flashgordon.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flashgordon design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 80 mm
Meganecan gw
Barbedx/MeganeCAN
ESP32-based CAN-bus companion for Renault Megane 2 infotainment displays.
68 parts3 - 4 layers80 × 95 mm
Usb charging hub
hackclub/reflow
A YSWS for the northern hemisphere's summer and the aussie's winter. Run by @pmnlla, with love and loads of carrots.
214 parts2 - 4 layers149.5 × 113 mm
1. PDU
SshgurkiratSingh/CCMS_PORTAL
A full-stack smart streetlight fleet management system with real-time monitoring, remote control, and analytics.
111 parts2 - 2 layers140.3 × 98.7 mm
MEOW System Integration
andrewgond/M.E.O.W-Mealtime-Electronic-Observation-and-Weighing
M.E.O.W. automated pet feeder, a system that dispenses food and logs pet weight using load cells and RFID identification.
40 parts1Apache-2.0 - 2 layers175 × 90 mm
Controller
Circuit-Digest/machine-vision-robotic-assembly-system
A machine vision-based robotic assembly system using the MechArm 270, NVIDIA Jetson Nano, and a custom ESP32 controller board for automated pick-and-place and miniature car assembly.
95 parts1MIT - 2 layers142.5 × 99 mm
- 2 layers109 × 78.5 mm
ESP32 Interface
Saroja-J/ESP32-Board-
Custom ESP32-WROOM-32D PCB designed in KiCad with USB-UART,I2C,VSPI, and Sensor Interfaces.
62 parts1