Skip to the content
2 layers65 × 30 mmPiKVM, the printed circuit board in 3D

A collection of PCBs that I've made for various projects.

Size
65 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
43
Pads
80
Tracks, vias
83, 0
Pours
40
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
5 Nov 2022
Updated
13 Mar 2023

Overview

PiKVM is an open-source printed circuit board by bweston6, from the bweston6/pcbs repository on GitHub. It is a 2-layer board of 65 × 30 mm with 16 parts on 43 nets, routed with 83 tracks and 0 vias.

It is built around the TLP222AF. Its parts include 6 resistors, 4 ICs and 2 connectors.

Main components

1

README

README.md

PCBs

PiKVM

The PiPVM project requires some additional hardware for ATX system control.

This PCB implements the circuit from this section: https://github.com/pikvm/pikvm#setting-up-the-v2 in a Raspberry Pi uHat footprint, per the specification at https://github.com/raspberrypi/hats.

PiKVM board

Parts

16
QtyValueFootprintReferences
4390RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R5, R6
4TLP222APackage_DIP:DIP-4_W7.62mmU1, U2, U3, U4
24K7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3, R4
1Conn_01x08Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ2
1Raspberry_Pi_2_3Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ1

The 12 most common of 16 parts.

More from bweston6/pcbs

2
  • 2 layers85.7 × 54 mmSimplest cpu, the printed circuit board in 3D

    Simplest cpu

    bweston6/pcbs

    A collection of PCBs that I've made for various projects.

    100 parts
  • 2 layers45.7 × 29.2 mmPiKVM, the printed circuit board in 3D

    PiKVM

    bweston6/pcbs

    A collection of PCBs that I've made for various projects.

    12 parts

Similar boards

  • 2 layers68 × 86.9 mmNBoxRpi, the printed circuit board in 3D

    NBoxRpi

    trihome/RasPi_NervesBOX

    An extension platform for the Raspberry Pi that mimics the functionality of a PLC.

    95 parts5CC-BY-SA-4.0
  • 2 layers100.3 × 99.3 mmMiatuino, the printed circuit board in 3D

    Miatuino

    Maverick765/miatuino

    まずはアクセルを完全に戻した状態で[Closed throttle ADC Count]の右の[Get Current]をクリックして、スロットル全閉時の値を取得します。 次に、アクセルを完全に踏み込んだ状態で[Full throttle ADC Count]の右の[Get Current]をクリックして、スロットル前回時の値を取得します。 完了したら[Accept]をクリックします。

    121 parts1GPL-2.0
  • 4 layers85 × 45 mmPoc 4cell, the printed circuit board in 3D

    Poc 4cell

    cajt/poc-scp-ft-4s-bms-app

    Proof of concept fault tolerant SCP with a BMS Application.

    85 partsBSD-2-Clause
  • 2 layers81.3 × 63.5 mmPowerboard, the printed circuit board in 3D

    Powerboard

    ctake1235/2024PowerBoard

    28 parts
  • 2 layers21 × 37.3 mmHeimdall, the printed circuit board in 3D

    Heimdall

    HarkonenBade/heimdall

    18 parts
  • 2 layers113.5 × 70.5 mmController2, the printed circuit board in 3D

    Controller2

    Miceuz/door-control

    An entrance to hackerspace control system

    65 partsApache-2.0
  • 2 layers93.2 × 117 mmESXAR panelize, the printed circuit board in 3D

    ESXAR panelize

    nanbuwks/ESXAR

    57 partsUnlicense

Questions

How big is the PiKVM PCB?

It measures 65 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PiKVM use?

16 parts, built around the TLP222AF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PiKVM KiCad files?

From the bweston6/pcbs repository on GitHub, at the commit this page was made from: the board is PiKVM uHat/PiKVM.kicad_pcb and its schematic PiKVM uHat/PiKVM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PiKVM design in my own project?

Its repository states no licence, so its author keeps all rights: ask bweston6 before reusing the design.