

Hw bms-48v
48V/200A battery monitoring system
- Size
- 100 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 32
- Pads
- 171
- Tracks, vias
- 175, 22
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20230410)
- Created
- 24 Feb 2023
- Updated
- 4 Dec 2023
Overview
Hw bms-48v is an open-source printed circuit board by burgrp, from the burgrp/hw-bms-48v repository on GitHub. It is a 2-layer board of 100 × 50 mm with 41 parts on 32 nets, routed with 175 tracks and 22 vias.
It is built around the ESP32-C3-WROOM-02-H4, LM1117MP-3.3 and SK22. Its parts include 13 resistors, 12 capacitors, 5 connectors, 3 ICs and 2 diodes. It belongs with the power boards and the ESP32 and RISC-V boards of this library.
Main components
3ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLM1117MP-3.3
SOT-2230℃~+125℃@(Ta) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA 99uVrms Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSK22
DO-214AA(SMB)-50℃~+150℃ 1 Independent 20V 2A 500mV@2A 500uA@20V 55A DO-214AA(SMB) Schottky Diodes ROHSDIOTECSchottky Diodes
README
README.mdhw-bms-48v
48V/200A battery monitoring system
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C8, C10, C12 |
| 4 | MountingHole | MountingHole:MountingHole_3.7mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R7, R10 |
| 3 | 47u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C9, C11 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R12 |
| 2 | 27k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R11 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 10u/100V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 270R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 33uH | Inductor_SMD:L_12x12mm_H6mm | L1 |
| 1 | 3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 3k9 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 6n8 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 750R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | ??? | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | BATT | Drake:DG235-3.81-02P | J1 |
| 1 | BD9G341EFJ | Package_SO:HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm_ThermalVias | U1 |
| 1 | CURRENT | Connector_JST:JST_XH_S5B-XH-A-1_1x05_P2.50mm_Horizontal | J3 |
| 1 | ESP32-C3-WROOM-02 | Espressif:ESP32-C3-WROOM-02 | U3 |
| 1 | ILI9225 | Connector_PinSocket_2.54mm:PinSocket_1x11_P2.54mm_Vertical | J5 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | PROG | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | SK22 | Diode_SMD:D_SMB | D1 |
| 1 | TEMP | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J4 |
Similar boards
- 2 layers50 × 35 mm

- 2 layers40 × 86 mm

Fanctrl
burgrp/accuwatt
6 channel electric boiler switch with tariff and I2C ports, based on ESP8266
33 parts - 2 layers170.6 × 121.1 mm

- 2 layers175 × 120 mm

- 4 layers100 × 70 mm

Controller
Eryk-Mozdzen/hogger2
Hemispherical Omnidirectional Gimbaled (HOG) wheel - this robot have two of them
208 parts2 - 4 layers77.3 × 48.5 mm

ESP32 IOT
WasikeIsaac/ESP32_IOT-PCB-
ESP32 IoT board: 4-layer KiCad PCB with USB-C, BME280, mic, audio amp, SD card, GPIO breakout. Full custom design from schematic to layout.
87 parts1 - 2 layers82.1 × 82.1 mm

Uncut Gem
QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
207 parts210AGPL-3.0 - 4 layers126.6 × 37.7 mm

Gruzik2.0
NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition
50 parts101MIT
Questions
How big is the Hw bms-48v PCB?
It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hw bms-48v use?
41 parts, built around the ESP32-C3-WROOM-02-H4, LM1117MP-3.3 and SK22. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hw bms-48v KiCad files?
From the burgrp/hw-bms-48v repository on GitHub, at the commit this page was made from: the board is board/hw-bms-48v.kicad_pcb and its schematic board/hw-bms-48v.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hw bms-48v design in my own project?
Its repository states no licence, so its author keeps all rights: ask burgrp before reusing the design.