

Esp32c3wroom02 max31856 tm1640
- Size
- 77.6 × 94 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 152
- Nets
- 73
- Pads
- 548
- Tracks, vias
- 1,622, 172
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Sep 2025
- Updated
- 1 Sep 2025
Overview
Esp32c3wroom02 max31856 tm1640 is an open-source printed circuit board by bunnmei, from the bunnmei/FEG2_PCB repository on GitHub. It is a 2-layer board of 77.6 × 94 mm with 152 parts on 73 nets, routed with 1,622 tracks and 172 vias.
It is built around the ESP32-C3-WROOM-02-H4, MAX31856 and AMS1117-3.3. Its parts include 46 capacitors, 34 resistors, 18 ICs, 12 diodes and 10 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
3ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMAX31856
UncategorisedMaxim Integrated (Analog Devices)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
152| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | Conn_01x01_Socket | Pico_temp:One-Th | 00, 00, 01, 01, 02, 02, 03, 03, 3.3, 3.3, 5V, 5V, 10, 10, G, G +4 |
| 18 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R5, R6, R6, R10, R10, R11, R11, R12, R12, R15, R15, R16, R16, R17, R17 +2 |
| 12 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C7, C7, C8, C8, C10, C10, C14, C14, C15, C15, C17, C17 |
| 12 | D | Diode_SMD:D_SOD-123 | D1, D1, D2, D2, D3, D3, D4, D4, D5, D5, D6, D6 |
| 8 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C9, C9, C11, C11, C16, C16, C18, C18 |
| 8 | 100 | Resistor_SMD:R_0603_1608Metric | R8, R8, R9, R9, R13, R13, R14, R14 |
| 8 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5, C5, C6, C6, C12, C12, C13, C13 |
| 8 | Conn_01x01_Socket | Pico_temp:Th_1.2 | J2, J2, J3, J3, J4, J4, J5, J5 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C2, C3, C3, C21, C21 |
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C1, C4, C4, C20, C20 |
| 4 | 10 | Resistor_SMD:R_0603_1608Metric | R3, R3, R4, R4 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C22, C22, C23, C23 |
| 4 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R1, R2, R2 |
| 4 | CC56-12CGKWA | Pico_temp:7set_0.36_4bit | U8, U8, U9, U9 |
| 4 | MAX31856 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U4, U4, U6, U6 |
| 4 | SW_Push_Dual | Pico_temp:SW-SMD | BOOT, BOOT, RST, RST |
| 4 | ~ | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3, U3, U5, U5 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C19, C19 |
| 2 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1, U1 |
| 2 | ESP32-C3-WROOM-02 | esp32-dev-boards:ESP32-C3-WROOM-02-handsolder | U2, U2 |
| 2 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1, J1 |
| 2 | ~ | Pico_temp:tm1640 | U7, U7 |
The 144 most common of 152 parts.
More from bunnmei/FEG2_PCB
1- 2 layers77.6 × 46 mm

Similar boards
- 4 layers90 × 43 mm

Temperature Thing With Thermocouple 3V3
spacebiz24/Thermal-Profiling
A Thermal Profiling Platform built with ATMega328P and MAX31856
89 parts3MPL-2.0 - 2 layers83.9 × 114.9 mm

Hot plate controller
rohamid/Hot-plate-controller-master
STM32 based hot plate PCB soldering controller
81 parts - 2 layers60 × 30 mm

- 2 layers79.9 × 36.2 mm

Desk display
nepyope/Project-Homunculus
Project Homunculus is open-source, low-cost hardware for capturing human hand and arm motions. It has two parts.
63 parts51 - 2 layers51 × 71 mm

- 2 layers60 × 100 mm

- 2 layers80.5 × 91.4 mm

- 2 layers38.1 × 49.5 mm

Esp32c3-iot client board
74th/esp32c3-iot-server-board
Board for converting Grove device to IoT Server using ESP32-C3-WROOM-02.
40 parts4MIT
Questions
How big is the Esp32c3wroom02 max31856 tm1640 PCB?
It measures 77.6 × 94 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32c3wroom02 max31856 tm1640 use?
152 parts, built around the ESP32-C3-WROOM-02-H4, MAX31856 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32c3wroom02 max31856 tm1640 KiCad files?
From the bunnmei/FEG2_PCB repository on GitHub, at the commit this page was made from: the board is mentuke/esp32c3wroom02_max31856_tm1640.kicad_pcb and its schematic esp32c3wroom02_max31856_tm1640.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32c3wroom02 max31856 tm1640 design in my own project?
Its repository states no licence, so its author keeps all rights: ask bunnmei before reusing the design.