

EuroRack sytle analog synthasizer designs
- Size
- 54 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 40
- Pads
- 135
- Tracks, vias
- 297, 24
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Nov 2020
- Updated
- 23 Feb 2025
Overview
VCF is an open-source printed circuit board by BruteClaw, from the BruteClaw/Analog-Synth repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 54 × 100 mm with 48 parts on 40 nets, routed with 297 tracks and 24 vias.
It is built around the 1N4148W. Its parts include 17 resistors, 10 capacitors, 8 diodes, 6 connectors and 4 transistors. It belongs with the audio and music boards of this library.
Main components
1README
README.mdAnalog-Synth
Analog Synthasizer Designs
These are designs for EuroRack compatable synthasizer modules.
Each module is designed as a seperate project in KiCAD Each folder includes a BOM from Mouser.com, the Gerber Files if you just want to have a board printed and a PDF of the schematic.
I have taken insparation from all over the web including Music From Outer Space, Yusynth and Look Mom no Computer. Some designs are outright copies of their schematic with my board layout design.
Look in Overal Design.xlsx for where I have gotten the design from And current progress on the designs.
All designs are without waranty, please build at your own risk, I have not tested any of these designs at this time. If you build any of them, you assume responsibiltiy for any potential damage to your existing equipment.
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1N4148W | Diodes_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 5 | 1K | Resistors_SMD:R_1210_HandSoldering | R4, R5, R9, R13, R17 |
| 4 | 100uF | Capacitors_SMD:C_1210_HandSoldering | C2, C3, C8, C9 |
| 4 | BC818 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 3 | 0.47uF | Capacitors_SMD:C_1210_HandSoldering | C4, C5, C7 |
| 3 | 2K | Resistors_SMD:R_1210_HandSoldering | R6, R11, R15 |
| 3 | 47K | Resistors_SMD:R_1210_HandSoldering | R1, R2, R3 |
| 3 | AudioJack1_Switch | Custom_Library:Mono_Jack_3.5mm_Switch_Switchcraft_35RAPC2AH3 | J1, J2, J6 |
| 2 | 10uF | Capacitors_SMD:C_1210_HandSoldering | C1, C10 |
| 2 | 1K | Potentiometers:Potentiometer_Bourns_PTV09A-2_Vertical | RV1, RV2 |
| 2 | Conn_01x04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J3, J4 |
| 1 | 0.1uF | Capacitors_SMD:C_1210_HandSoldering | C6 |
| 1 | 1.8K | Resistors_SMD:R_1210_HandSoldering | R16 |
| 1 | 3.3M | Resistors_SMD:R_1210_HandSoldering | R14 |
| 1 | 360 | Resistors_SMD:R_1210_HandSoldering | R10 |
| 1 | 5.6K | Resistors_SMD:R_1210_HandSoldering | R7 |
| 1 | 82 | Resistors_SMD:R_1210_HandSoldering | R8 |
| 1 | 82K | Resistors_SMD:R_1210_HandSoldering | R12 |
| 1 | Conn_02x08_Odd_Even | Pin_Headers:Pin_Header_Straight_2x08_Pitch2.54mm | J5 |
| 1 | MR-13-A4 | Custom_Library:MR-13-A4 | SW1 |
More from BruteClaw/Analog-Synth
12- 2 layers100 × 110 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 110 mm

- 2 layers100 × 110 mm

- 2 layers200 × 120 mm

- 2 layers80 × 110 mm

- 2 layers80 × 110 mm

- 2 layers200 × 120 mm

- 2 layers54 × 100 mm

Similar boards
- 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers208.8 × 396.9 mm

Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm

- 4 layers95.6 × 73.6 mm

- 2 layers141.5 × 83 mm

Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers160 × 100 mm

- 2 layers99.1 × 90.7 mm

Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers229.8 × 102.6 mm

Questions
How big is the VCF PCB?
It measures 54 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VCF use?
48 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VCF KiCad files?
From the BruteClaw/Analog-Synth repository on GitHub, at the commit this page was made from: the board is Surface Mount Designes/VCF/VCF.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the VCF design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).