Skip to the content
2 layers100 × 110 mmLFO, the printed circuit board in 3D

EuroRack sytle analog synthasizer designs

Size
100 × 110 mm
Copper layers
2
Thickness
1.6 mm
Parts
79
Nets
80
Pads
278
Tracks, vias
756, 73
Pours
6
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Nov 2020
Updated
23 Feb 2025

Overview

LFO is an open-source printed circuit board by BruteClaw, from the BruteClaw/Analog-Synth repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 110 mm with 79 parts on 80 nets, routed with 756 tracks and 73 vias.

It is built around the MC33178D, ICM7555N and BS170FTA, with the MMBT3904 and MMBT3906 among its other parts. Its parts include 35 resistors, 13 capacitors, 11 connectors, 5 diodes and 4 ICs. It belongs with the audio and music boards of this library.

Main components

5

README

README.md

Analog-Synth

Analog Synthasizer Designs

These are designs for EuroRack compatable synthasizer modules.

Each module is designed as a seperate project in KiCAD Each folder includes a BOM from Mouser.com, the Gerber Files if you just want to have a board printed and a PDF of the schematic.

I have taken insparation from all over the web including Music From Outer Space, Yusynth and Look Mom no Computer. Some designs are outright copies of their schematic with my board layout design.

Look in Overal Design.xlsx for where I have gotten the design from And current progress on the designs.

All designs are without waranty, please build at your own risk, I have not tested any of these designs at this time. If you build any of them, you assume responsibiltiy for any potential damage to your existing equipment.

Parts

79
QtyValueFootprintReferences
6100KResistors_SMD:R_1210_HandSolderingR7, R8, R9, R11, R12, R21
6AudioJack1_SwitchCustom_Library:Mono_Jack_3.5mm_Switch_Switchcraft_35RAPC2AH3J1, J4, J5, J6, J10, J11
51KResistors_SMD:R_1210_HandSolderingR2, R13, R25, R28, R32
4100uFCapacitors_SMD:CP_Elec_6.3x5.8C8, C10, C11, C12
410KResistors_SMD:R_1210_HandSolderingR1, R3, R33, R34
41N4148Diodes_SMD:D_SOD-123D2, D3, D4, D5
2100K 1%Resistors_SMD:R_1210_HandSolderingR14, R18
2100kResistors_SMD:R_1210_HandSolderingR29, R30
210KCustom_Library:PVG5ARV4, RV5
210K LinPotentiometers:Potentiometer_Bourns_PTV09A-2_VerticalRV2, RV6
210nFCapacitors_SMD:C_1210_HandSolderingC2, C3
2150KResistors_SMD:R_1210_HandSolderingR20, R24
222uFCapacitors_SMD:CP_Elec_5x5.8C9, C13
250KCustom_Library:PVG5ARV1, RV3
2Conn_01x07Pin_Headers:Pin_Header_Straight_1x07_Pitch2.54mmJ8, J9
2Conn_01x12Pin_Headers:Pin_Header_Straight_1x12_Pitch2.54mmJ2, J3
2TL074Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mmU3, U4
1100k 1%Resistors_SMD:R_1210_HandSolderingR17
110uFCapacitors_SMD:C_1210_HandSolderingC4
1120pFCapacitors_SMD:C_1210_HandSolderingC7
112KResistors_SMD:R_1210_HandSolderingR4
115KResistors_SMD:R_1210_HandSolderingR27
11K5Resistors_SMD:R_1210_HandSolderingR26
11nFCapacitors_SMD:C_1210_HandSolderingC6
11uFCapacitors_SMD:C_1210_HandSolderingC5
1200K 1%Resistors_SMD:R_1210_HandSolderingR16
1200k 1%Resistors_SMD:R_1210_HandSolderingR19
122KResistors_SMD:R_1210_HandSolderingR22
127KResistors_SMD:R_1210_HandSolderingR10
12K7Resistors_SMD:R_1210_HandSolderingR23
147KResistors_SMD:R_1210_HandSolderingR35
147K 1%Resistors_SMD:R_1210_HandSolderingR15
147nFCapacitors_SMD:C_1210_HandSolderingC1
14K7Resistors_SMD:R_1210_HandSolderingR31
150K LinPotentiometers:Potentiometer_Bourns_PTV09A-2_VerticalRV7
1820Resistors_SMD:R_1210_HandSolderingR6
18K2Resistors_SMD:R_1210_HandSolderingR5
1BS170FTO_SOT_Packages_SMD:SOT-23Q1
1Conn_02x08_Odd_EvenPin_Headers:Pin_Header_Straight_2x08_Pitch2.54mmJ7
1ICM7555Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU1
1LEDLEDs:LED_Rectangular_W3.9mm_H1.9mmD1
1MC3317Housings_SOIC:SO-8_5.3x6.2mm_Pitch1.27mmU2
1MMBT3904TO_SOT_Packages_SMD:SOT-23Q3
1MMBT3906TO_SOT_Packages_SMD:SOT-23Q2
1SW_DPDT_x2Custom_Library:200AWMDP1T2A1M6QESW1

More from BruteClaw/Analog-Synth

12
  • 2 layers100 × 110 mmComb Filter, the printed circuit board in 3D

    Comb Filter

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    168 parts10GPL-3.0
  • 2 layers100 × 100 mmNAND, the printed circuit board in 3D

    NAND

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    89 parts10GPL-3.0
  • 2 layers100 × 100 mmNOT, the printed circuit board in 3D

    NOT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    89 parts10GPL-3.0
  • 2 layers100 × 100 mmNOR THT, the printed circuit board in 3D

    NOR THT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    89 parts10GPL-3.0
  • 2 layers100 × 100 mmNOT THT, the printed circuit board in 3D

    NOT THT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    89 parts10GPL-3.0
  • 2 layers100 × 110 mmLFO THT, the printed circuit board in 3D

    LFO THT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    79 parts10GPL-3.0
  • 2 layers200 × 120 mmPower Supply THT, the printed circuit board in 3D

    Power Supply THT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    57 parts10GPL-3.0
  • 2 layers80 × 110 mmADSR Envelope, the printed circuit board in 3D

    ADSR Envelope

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    55 parts10GPL-3.0
  • 2 layers80 × 110 mmADSR Envelope THT, the printed circuit board in 3D

    ADSR Envelope THT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    55 parts10GPL-3.0
  • 2 layers200 × 120 mmPower Supply, the printed circuit board in 3D

    Power Supply

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    53 parts10GPL-3.0
  • 2 layers54 × 100 mmVCF, the printed circuit board in 3D

    VCF

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    48 parts10GPL-3.0
  • 2 layers54 × 100 mmVCF THT, the printed circuit board in 3D

    VCF THT

    BruteClaw/Analog-Synth

    EuroRack sytle analog synthasizer designs

    48 parts10GPL-3.0

Similar boards

  • 2 layers29.2 × 109.2 mmSkis, the printed circuit board in 3D

    Skis

    kraakenstuff/Skis

    The SMD, 6HP version of Bastl Skis. Includes sliders :)

    96 parts11
  • 2 layers101.6 × 53.3 mmDirect drive LEDs, the printed circuit board in 3D

    Direct drive LEDs

    RepRapLtd/AnalogueNeuralNet

    Project to make a photonic neural network using photochromic material for the synaptic weighting adjustments

    43 parts8GPL-3.0
  • 2 layers98.4 × 93.8 mmHtH sao prod, the printed circuit board in 3D

    HtH sao prod

    drydenmaker/SuperHashtag

    a custom PCB for #badgelife and #badgeLove

    22 parts1
  • 2 layers14.5 × 8.6 mmGetting to blinky, the printed circuit board in 3D

    Getting to blinky

    ALeggeUp/getting-to-blinky

    This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ or send a letter to Creative Commons, PO Box…

    17 partsCC-BY-SA-4.0
  • 2 layers54.9 × 85.9 mmEl Santo, the printed circuit board in 3D

    El Santo

    markwinap/Mexican_BadgeLife

    Mexican themed Badge Life Designs

    18 partsGPL-3.0
  • 2 layers43.2 × 43.2 mmTest1, the printed circuit board in 3D

    Test1

    PStinno/led-spinner-pcb

    My first two layer PCB, spinning LED effect with no micro-controller or code.

    27 partsCC-BY-SA-4.0
  • 2 layers63 × 88 mmParagon, the printed circuit board in 3D

    Paragon

    timbalicious/netrunner_paragon_pcb

    Possibly functional PCB alt-art Paragon for the Netrunner LCG

    128 parts

Questions

How big is the LFO PCB?

It measures 100 × 110 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LFO use?

79 parts, built around the MC33178D, ICM7555N, BS170FTA and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LFO KiCad files?

From the BruteClaw/Analog-Synth repository on GitHub, at the commit this page was made from: the board is Surface Mount Designes/LFO/LFO.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LFO design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).