2 layers100 × 110 mm
2 layers29.2 × 109.2 mm
The SMD, 6HP version of Bastl Skis. Includes sliders :)
- Size
- 29.2 × 109.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 76
- Pads
- 280
- Tracks, vias
- 866, 115
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Jan 2020
- Updated
- 10 Sep 2021
Overview
Skis is an open-source printed circuit board by kraakenstuff, from the kraakenstuff/Skis repository on GitHub. It is a 2-layer board of 29.2 × 109.2 mm with 96 parts on 76 nets, routed with 866 tracks and 115 vias.
It is built around the LM13700M, BS170FTA and MMBT3904, with the MMBT3906 among its other parts. Its parts include 38 resistors, 18 capacitors, 11 connectors, 10 transistors and 4 diodes.
Main components
4
LM13700M
SOIC-16-16V~-4.75V、4.75V~16V 0℃~+70℃ 110dB 2 2.6mA 20mA 400nA 4mV 50V/us 600nA 9.5V~32V SOIC-16 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
BS170FTA
SOT-23-55℃~+150℃ 1 N-channel 2.8Ω@10V 250mA 25pF 2V 2pF 300mW 400pC@4.5V 5pF 60V SOT-23 MOSFETs ROHSUMWMOSFETsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)MMBT3906
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200mA 200mW 300MHz 300mV 40V 5V PNP SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
README
README.mdSkis
This is smd version of Bastl Skis v1. Main differences are:
- It has skis (two sliders) vs. no skis in Bastl version
- 6HP vs. 5HP, for obvious, OCD reasons
- Range switch vs. range backside jumper (although this switch works as a jumper - instead of going from freq0 to freq1, and then from freq1 to freq2 in the second position, it goes from freq0 to freq1, and then from freq0 to freq2)
- Version 2 of Bastl Skis has decay CV input, and this one doesn't have it
- Version 1 of Bastl Skis was THT and had two sandwiched boards, and this one is SMT in one board.
Status: tested and working.
CC-BY-SA Václav Peloušek bastl-instruments.com
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4, R10, R12, R13, R17, R18, R19, R22, R23, R29, R31, R32, R36, R37, R38 |
| 14 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R5, R6, R8, R9, R15, R20, R21, R24, R25, R27, R28, R34 |
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7, C8, C9, C10, C11, C12, C13, C14 |
| 6 | BS170F | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q5, Q6, Q7, Q10 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R14, R26, R33 |
| 4 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C15, C16 |
| 4 | 10u | Capacitor_SMD:CP_Elec_5x5.8 | C4, C5, C6, C18 |
| 2 | 1N4148 | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D5 |
| 2 | 1N5819 | Diode_SMD:D_SOD-123 | D3, D4 |
| 2 | 1u | Capacitor_SMD:CP_Elec_4x5.8 | C3, C17 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R30 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R16, R35 |
| 2 | 500k | KraakenStuff:PTL30 | RV1, RV2 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q4, Q9 |
| 2 | MMBT3906 | Package_TO_SOT_SMD:SOT-23 | Q3, Q8 |
| 2 | MUTE | KraakenStuff:Header 1x2 | JP3, JP6 |
| 2 | TL074 | Package_SO:SSOP-14_5.3x6.2mm_P0.65mm | U1, U3 |
| 1 | CRUNCH_A | KraakenStuff:SubSwitch_SPDT | SW1 |
| 1 | CRUNCH_B | KraakenStuff:SubSwitch_SPDT | SW3 |
| 1 | CV_IN_A | KraakenStuff:PJ301M-12-NoHole | J2 |
| 1 | CV_IN_B | KraakenStuff:PJ301M-12-NoHole | J8 |
| 1 | ENV_OUT_A | KraakenStuff:PJ301M-12-NoHole | J5 |
| 1 | ENV_OUT_B | KraakenStuff:PJ301M-12-NoHole | J11 |
| 1 | EuroPower | KraakenStuff:EuroHeader10 | J6 |
| 1 | HOLD_A | KraakenStuff:Header 1x2 | JP2 |
| 1 | HOLD_B | KraakenStuff:Header 1x2 | JP5 |
| 1 | LM13700 | Package_SO:SOIC-16W_5.3x10.2mm_P1.27mm | U2 |
| 1 | LO_FI_FILTER_A | KraakenStuff:Header 1x2 | JP1 |
| 1 | LO_FI_FILTER_B | KraakenStuff:Header 1x2 | JP4 |
| 1 | SIGNAL_IN_A | KraakenStuff:PJ301M-12-NoHole | J3 |
| 1 | SIGNAL_IN_B | KraakenStuff:PJ301M-12-NoHole | J9 |
| 1 | SIGNAL_OUT_A | KraakenStuff:PJ301M-12-NoHole | J4 |
| 1 | SIGNAL_OUT_B | KraakenStuff:PJ301M-12-NoHole | J10 |
| 1 | SPEED_A | KraakenStuff:SubSwitch_SPDT | SW2 |
| 1 | SPEED_B | KraakenStuff:SubSwitch_SPDT | SW4 |
| 1 | TRIG_A | KraakenStuff:PJ301M-12-NoHole | J1 |
| 1 | TRIG_B | KraakenStuff:PJ301M-12-NoHole | J7 |
Similar boards
- 2 layers27.9 × 101.6 mm
MFOS Eight Stage Phase Shifter - Main
mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules
105 parts166MIT - 2 layers80.9 × 108.2 mm
- 2 layers65 × 106.5 mm
- 2 layers48.3 × 99.1 mm
Modulation source
JordanAceto/modulation_source
Eurorack compatible pcb with sine/square VCLFO, white and pink noise, and sample & hold
95 parts6 - 4 layers81.3 × 108 mm
Myriad 0.4
Emute-Lab-Instruments/Myriad
Sources for Emute Lab Instruments Myriad eurorack module
185 parts2MIT - 4 layers40.5 × 100 mm
- 2 layers
Questions
How big is the Skis PCB?
It measures 29.2 × 109.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Skis use?
96 parts, built around the LM13700M, BS170FTA, MMBT3904 and MMBT3906. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Skis KiCad files?
From the kraakenstuff/Skis repository on GitHub, at the commit this page was made from: the board is Skis.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Skis design in my own project?
Its repository states no licence, so its author keeps all rights: ask kraakenstuff before reusing the design.