2 layers96.4 × 119.9 mm
2 layers118.8 × 120.1 mm
FlatboxSplit Left
Brisk4t/flatboxsplitLeverless fighting game controller based on the RP2040
- Size
- 118.8 × 120.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 23
- Pads
- 74
- Tracks, vias
- 105, 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 31 Aug 2024
- Updated
- 31 Aug 2024
Overview
FlatboxSplit Left is an open-source printed circuit board by Brisk4t, from the Brisk4t/flatboxsplit repository on GitHub. It is a 2-layer board of 118.8 × 120.1 mm with 15 parts on 23 nets, routed with 105 tracks and 1 via.
It is built around the RP2040-ZERO. Its parts include 12 switches, 1 IC and 1 connector. It belongs with the RP2040 boards of this library.
Main components
1README
README.mdFlatboxSplit: Hitbox-Layout fightstick with Gateron low profile switches
Original Design inspired by Flatbox by JFedor.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm | SW13, SW14, SW15, SW16, SW17, SW18 |
| 6 | SW_SPST | fingerpunch:gateron-ks27 | SW1, SW2, SW3, SW4, SW5, SW6 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | SW_SPST | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | RST1 |
| 1 | rp2040-zero | rp2040:rp2040-zero-tht | U1 |
Questions
How big is the FlatboxSplit Left PCB?
It measures 118.8 × 120.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FlatboxSplit Left use?
15 parts, built around the RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FlatboxSplit Left KiCad files?
From the Brisk4t/flatboxsplit repository on GitHub, at the commit this page was made from: the board is FlatboxSplit_Left/FlatboxSplit_Left.kicad_pcb and its schematic FlatboxSplit_Left/FlatboxSplit_Left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FlatboxSplit Left design in my own project?
Its repository states no licence, so its author keeps all rights: ask Brisk4t before reusing the design.
More from Brisk4t/flatboxsplit
1Similar boards
- 2 layers132.3 × 94.9 mm
- 2 layers321 × 92.3 mm
- 2 layers255.9 × 99.3 mm
Zerosprey42
beekeeb/zerosprey42
Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.
96 parts140 - 2 layers146.3 × 69.5 mm
- 2 layers54 × 64 mm
DonConIOmini
ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers
96 parts66MIT - 2 layers52 × 50 mm
RP2040-TestPatternGenerator VGA
nmur/RP2040-TestPatternGenerator
A simple test pattern generator running on the RP2040 microcontroller
12 parts64GPL-3.0 - 2 layers120 × 40 mm
Buinchiez40
ChrisChrisLoLo/bunchiez40
A pocket keyboard that makes use of mouse switches to achieve a miniscule size
90 parts56GPL-3.0 - 2 layers305.2 × 76.2 mm
