Skip to the content
2 layers20 × 20 mmBricopixels, the printed circuit board in 3D

Custom RGB Led PCB for e-textile

Size
20 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
4
Pads
10
Tracks, vias
30, 1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
2 Jun 2019
Updated
10 Aug 2020

Overview

Bricopixels is an open-source printed circuit board by brico-labs, from the brico-labs/BricoPixelsLED repository on GitHub. It is a 2-layer board of 20 × 20 mm with 7 parts on 4 nets, routed with 30 tracks and 1 via.

It is built around the WS2812B. Its parts include 4 connectors, 1 capacitor and 1 diode. It belongs with the lEDs and displays boards of this library.

Main components

1

README

README.md

BricoPixels LED

PCB diseñanda por BricoLabs para utilizar en proyectos de e-textile. Se utiliza un LED RGB WS2812B el cual incorpora un circuito de control dentro del propio componente, que es un encapsulado 5050.

Para utilizar junto con microcontroladores AVR de Atmel (ATmega, ATtiny) o con la familia ESP de Espressif (ESP8266, etc)

Cada BricoPixel lleva tan solo dos componentes:

  • LED RGB WS2812B con encapsulado de color negro.
  • Condensador SMD de 100nF 0805, para estabilizar la tensión de alimentación del circuito de control del LED RGB.

La forma de la placa PCB está diseñada para poder coserla directamente sobre cualquier textil con hilo conductor, o incluso pegarla sobre otras superficies planas.

En el directorio gerber se encuentra la PCB ya panelizada y lista para fabricar, en placas de 10 x 10 cm y con 25 unidades de BricoPixel cada una. Para esto se utilizó el software GerberTools.

Se recomienda un grosor de PCB menor o igual a 1 milímetro. Esto facilita recortar manualmente cada uno de los BricoPixel.


Esta obra está bajo una licencia de Creative Commons Reconocimiento 4.0 Internacional (CC-BY).

Parts

7
QtyValueFootprintReferences
4Conn_01x01_FemaleBricopixels_pads:BricoPixel_pad_4xJ1, J2, J3, J4
10.1uFCapacitor_SMD:C_0805_2012MetricC1
1LOGOLogos:BricoLabs_only_logoG***
1WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD1

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers26 × 30 mmMicrocontroller, the printed circuit board in 3D

    Microcontroller

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    34 parts1.1kCC-BY-4.0
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 2 layers95.3 × 161.9 mmDfh badge, the printed circuit board in 3D

    Dfh badge

    tanaes/whopping_Voron_mods

    135 parts787GPL-3.0
  • 2 layers42.8 × 28.8 mmMM Skirt, the printed circuit board in 3D

    MM Skirt

    PrintersForAnts/Micron

    If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)

    11 parts741GPL-3.0
  • 2 layers149.6 × 127.1 mmErgodash, the printed circuit board in 3D

    Ergodash

    omkbd/ErgoDash

    keyboard

    187 parts732MIT
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 2 layers177.7 × 144.5 mmCOMM PANEL, the printed circuit board in 3D

    COMM PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    275 parts431

Questions

How big is the Bricopixels PCB?

It measures 20 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Bricopixels use?

7 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bricopixels KiCad files?

From the brico-labs/BricoPixelsLED repository on GitHub, at the commit this page was made from: the board is bricopixels.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bricopixels design in my own project?

Its repository states no licence, so its author keeps all rights: ask brico-labs before reusing the design.