Skip to the content
2 layers100 × 62.5 mmMisc Control Card, the printed circuit board in 3D

Misc Control Card

brianz123/Backplane-Files
Size
100 × 62.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
77
Pads
174
Tracks, vias
82, 2
Pours
3
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
23 Nov 2024
Updated
17 Jan 2025

Overview

Misc Control Card is an open-source printed circuit board by brianz123, from the brianz123/Backplane-Files repository on GitHub. It is a 2-layer board of 100 × 62.5 mm with 18 parts on 77 nets, routed with 82 tracks and 2 vias.

It is built around the ADS7828E and LM1117MP-3.3. Its parts include 4 connectors, 3 resistors, 3 ICs and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

Parts

18
QtyValueFootprintReferences
3RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3
2Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J4
2SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP1, JP2
1ADS7828Package_SO:TSSOP-16_4.4x5mm_P0.65mmU1
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1CCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1LM1085-5.0Package_TO_SOT_THT:TO-220-3_VerticalU3
1LM1117MP-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1~Custom:6509475J2

The 14 most common of 18 parts.

More from brianz123/Backplane-Files

3

Similar boards

  • 2 layers25.4 × 31.2 mmCtrl2.6Tester, the printed circuit board in 3D

    Ctrl2.6Tester

    OpenROV/openrov-electronics

    Electronics for OpenROV. Include schematics and other diagrams

    17 parts161
  • 4 layers90.2 × 95.9 mmHestia, the printed circuit board in 3D

    Hestia

    mawson-rovers/hestia

    Hestia is a space-ready heater & temperature measurement system developed by Mawson Rovers in Sydney. Its first mission will demonstrate a novel UTS heatsink design, aboard the Waratah Seed cubesat mission.

    184 parts3MIT
  • 2 layers82.8 × 25.4 mmIRSensorArray, the printed circuit board in 3D

    IRSensorArray

    Arrakark/IRSensorArray

    An IR Sensor Array for ENPH 253 Robot

    48 parts2MIT
  • 4 layers230 × 60 mmPSU, the printed circuit board in 3D

    PSU

    Thoric16/Power-Supply-Unit

    A custom-designed robotics Power Supply Unit (PSU) featuring multi-rail buck regulation, remotely switchable outputs, current monitoring, and a hardware E-Stop loop.

    157 parts1
  • 2 layers200 × 120 mmMainpcb, the printed circuit board in 3D

    Mainpcb

    bot-hoven/bot-hoven-electrical

    Electrical substem for Bot-Hoven. Includes KiCad files containing schematics and PCB designs for components in Bot-Hoven.

    82 parts
  • 4 layers429.6 × 293.4 mmOPSpec v0.1.0, the printed circuit board in 3D

    OPSpec v0.1.0

    lepton-7/Open-Plate-Spectrophotometer

    An open-source project to build a 96-well spectrophotometer operating at 620nm. Designed from the ground-up focusing on robust electronic design.

    661 partsGPL-3.0
  • 2 layers100 × 100 mmPortabeer pcb, the printed circuit board in 3D

    Portabeer pcb

    lucanastasio/portabeer

    portable draft beer

    309 parts
  • 4 layers75 × 40 mmWesp card access, the printed circuit board in 3D

    Wesp card access

    Technocopia/WESP_PoE_Door_entry

    New door access controller hardware based on the WESP32 board and powered over ethernet.

    70 parts

Questions

How big is the Misc Control Card PCB?

It measures 100 × 62.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Misc Control Card use?

18 parts, built around the ADS7828E and LM1117MP-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Misc Control Card KiCad files?

From the brianz123/Backplane-Files repository on GitHub, at the commit this page was made from: the board is Backplane Files/Cards/Misc_Control_Card/Misc_Control_Card.kicad_pcb and its schematic Backplane Files/Backplane/Backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Misc Control Card design in my own project?

Its repository states no licence, so its author keeps all rights: ask brianz123 before reusing the design.