Skip to the content
4 layers100 × 61.9 mmThruster Control Card, the printed circuit board in 3D

Thruster Control Card

brianz123/Backplane-Files
Size
100 × 61.9 mm
Copper layers
4
Thickness
1.6 mm
Parts
22
Nets
76
Pads
186
Tracks, vias
207, 113
Pours
6
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
23 Nov 2024
Updated
17 Jan 2025

Overview

Thruster Control Card is an open-source printed circuit board by brianz123, from the brianz123/Backplane-Files repository on GitHub. It is a 4-layer board of 100 × 61.9 mm with 22 parts on 76 nets, routed with 207 tracks and 113 vias.

It is built around the PCA9685PW and BSS138. Its parts include 5 resistors, 4 ICs, 2 transistors, 1 capacitor and 1 diode.

Main components

2

Parts

22
QtyValueFootprintReferences
4TestPointTestPoint:TestPoint_Pad_D1.5mmTP1, TP2, TP3, TP4
4~Thruster_Control_Card_Custom_Footprints:ESCU1, U2, U3, U4
3220Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3
3SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmA0, A1, A2
24.7kOResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R5
2BSS138Package_TO_SOT_SMD:SOT-23_HandsolderingQ1, Q2
110uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
1LED_RGABLED_THT:LED_D5.0mm-4_RGBD1
1PCA9685Package_SO:TSSOP-28_4.4x9.7mm_P0.65mmI2C_PWM_DRIVER1
1~Custom:6509475J1

More from brianz123/Backplane-Files

3
  • 4 layers101.6 × 120.6 mmBackplane, the printed circuit board in 3D

    Backplane

    brianz123/Backplane-Files

    19 parts

Similar boards

  • 2 layers56 × 79 mmSurgery Lamp Control PCB, the printed circuit board in 3D

    Surgery Lamp Control PCB

    aeventre/Autotracking_Surgical_Lamp

    This ROS 2 workspace contains all packages required for the Auto-Tracking Surgical Lamp system. The lamp uses 3D pose tracking of a handheld remote (via green ball detection) to plan and execute motions in real-time…

    45 parts2
  • 2 layers70 × 80 mmSpiderbot, the printed circuit board in 3D

    Spiderbot

    aeventre/Self_Balancing_Hexapod_Robot

    The goal for the initial configuration of this project was to design a Hexapod Robot capable of performing dynamic movements and maintaining self-balance.

    136 parts2Apache-2.0
  • 2 layers106.7 × 109.2 mmOMIDItone V2, the printed circuit board in 3D

    OMIDItone V2

    kiyoshigawa/oMIDItone_Controller_V2

    This is a refactored and updated version of the code in the https://github.com/kiyoshigawa/oMIDItone github repo intended to simplify and make faster the existing code base while simultaneously switching to PlatformIO.

    91 parts2LGPL-3.0
  • 2 layers265.5 × 132.3 mmDashdash, the printed circuit board in 3D

    Dashdash

    Churrosoft/Dashdash

    tablero de instrumentos por can para integrar con OpenEFI, cuando se nos ocurra algo mas original cambiamos el nombre

    272 parts1MIT
  • 2 layers111 × 119 mmCarte Principale, the printed circuit board in 3D

    Carte Principale

    clubrobot/Cartes-elec

    Repo de toutes les cartes électroniques utilisées par le CRINSA. Commencé en 2025 sous Kicad 8.0

    115 parts1MIT
  • 4 layers100 × 100 mmDMX servo controller hardware, the printed circuit board in 3D

    DMX servo controller hardware

    flavioamieiro/dmx_servo_controller

    This source describes Open Hardware and is licensed under the CERN-OHL-S v2. You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2.

    63 parts1
  • 2 layers40 × 90 mmWingBoard, the printed circuit board in 3D

    WingBoard

    benjohnemmett/Wingman

    Hardware layout and code for a basic fixed wing flight controller.

    85 partsMIT
  • 2 layersEsp, the printed circuit board in 3D

    Esp

    DaLumberjack/Communifarm-PCB

    homeassistant-pcb

    95 parts

Questions

How big is the Thruster Control Card PCB?

It measures 100 × 61.9 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Thruster Control Card use?

22 parts, built around the PCA9685PW and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Thruster Control Card KiCad files?

From the brianz123/Backplane-Files repository on GitHub, at the commit this page was made from: the board is Backplane Files/Cards/Thruster_Control_Card/Cards/Thruster_Control_Card/Thruster_Control_Card.kicad_pcb and its schematic Backplane Files/Backplane/Backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Thruster Control Card design in my own project?

Its repository states no licence, so its author keeps all rights: ask brianz123 before reusing the design.