
TEMPSEN01
mlab-modules/TEMPSEN01
Temperature sensor MAX31725 (16bit, I2C) intended for the use in connection with PX4 autopilot.

Hestia is a space-ready heater & temperature measurement system developed by Mawson Rovers in Sydney. Its first mission will demonstrate a novel UTS heatsink design, aboard the Waratah Seed cubesat mission. It is due to launch on a SpaceX rocket in July 2024.
Hestia is an open-source printed circuit board by mawson-rovers, from the mawson-rovers/hestia repository on GitHub, published under the MIT licence. It is a 4-layer board of 90.2 × 95.9 mm with 184 parts on 253 nets, routed with 2,983 tracks and 378 vias.
It is built around the MAX31725MTA+T, ADS7828E and TXB0104PW, with the MMZ1608A222BTA00, B2B-ZR and ESQ-126-39-G-D among its other parts. Its parts include 53 capacitors, 40 resistors, 13 connectors, 10 ICs and 7 diodes. It belongs with the robots and motor control boards and the MSP430 boards of this library.
Hestia is a cubesat circuit board developed by Mawson Rovers in support of UTS Resilient Space Computing initiative. It is designed to provide temperature control and monitoring for a demonstration heatsink payload which will be launched aboard the Waratah Seed satellite on a SpaceX rocket in early 2024.
Hestia was the Greek goddess of home and hearth, and similar to that, our Hestia board provides a home and warmth to the UTS heatsink.
This project has four primary modules:
All the software projects require customised build environments, and more details can be found in their respective READMEs.
The project also has a scripts/ folder which is used for automated builds on GitHub, and ws-1/ folder for interface information from our host Waratah Seed satellite.
The project is led by Dr Nick Bennett, Senior Lecturer at UTS, with software and electronics development managed by Matt Ryall from Mawson Rovers. John Dowdell and Scott Fraser developed the Hestia components for the mission.
The project was funded by SmartSat CRC, a federally-funded Collaborative Research Centre, and the University of Technology, Sydney (UTS).
Mawson Rovers has made the cubesat payload designs, firmware and software available under an MIT License.
Please feel free to learn from this code and reuse it on future space missions under the terms of the license. However, we will not be taking external contributions to this code.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C15, C17, C18, C19, C20, C21, C22, C27, C29, C31, C34, C35, C40, C41, C42 +9 |
| 18 | 10K 0.5% 1/16W | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12, R13, R14, R15, R16, R17, R18, R19, R23, R24, R25, R30, R31, R32, R33 +2 |
| 10 | MMZ1608A222BTA00 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | FB1, FB4, FB5, FB6, FB7, FB8, FB10, FB11, FB12, FB13 |
| 7 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | e1, R6, R35, R36, R37, R38, R45 |
| 7 | 10uF 16V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C16, C24, C25, C28, C30, C32 |
| 7 | 47uF 10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C23, C26, C33, C36, C37 |
| 7 | B2B-ZR | Hestia:B2B-ZR(LF)(SN) | J7, J8, J12, J13, J14, J15, J16 |
| 7 | Wire_Restraint_Hole | Hestia:Wire_Restraint_Hole_1.8mm | H9, H10, H11, H12, H13, H14, H15 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 6 | Thermistor NTC 10K 3610K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | TH1, TH2, TH3, TH4, TH5, TH6 |
| 4 | 100R 5% 1/10W | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R40, R41 |
| 4 | 20pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12, C13, C14 |
| 4 | 22uF 16V | Capacitor_SMD:C_1206_3216Metric | C5, C6, C7, C8 |
| 4 | MAX31725MTA+T | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U4, U5, U6, U7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380 | H1, H2, H3, H4 |
| 4 | MountingHole_Pad | Hestia:PC104_Pad_Hole_3P18_6P35 | H5, H6, H7, H8 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C50, C55, C56 |
| 3 | 74279220321 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB2, FB3, FB9 |
| 3 | DNP | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R44 |
| 2 | 1K3 5% 1/10W | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R22 |
| 2 | 2K7 5% 1/10W | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R28, R29 |
| 2 | 470R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R46 |
| 2 | 47K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R7 |
| 2 | ESQ-126-39-G-D | Hestia:ESQ-126-39-G-D | J3, J4 |
| 2 | ORANGE LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D5 |
| 2 | Wire_Restraint_Hole | Hestia:Wire_Restraint_Hole_1.9mm | H16, H17 |
| 1 | 0R | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R20 |
| 1 | 100p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C39 |
| 1 | 10uH | Hestia:SRP5030C | L2 |
| 1 | 14.7456MHz 12pf | Hestia:ecx-32_crystal | Y2 |
| 1 | 180R 5% 1/10W | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 2.2n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C38 |
| 1 | 32.768kHz 12.5pf | Hestia:CM7V-T1A | Y1 |
| 1 | 33K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 4.7nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | ADS7828 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 1 | BAT54S | Package_TO_SOT_SMD:SOT-323_SC-70_Handsoldering | D7 |
| 1 | BLUE LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | Conn_02x07_Odd_Even | Connector_IDC:IDC-Header_2x07_P2.54mm_Vertical | J6 |
| 1 | DNP | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R27 |
| 1 | DNP | Capacitor_SMD:C_0402_1005Metric | R42 |
| 1 | DNP | Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.2x2mm | U10 |
| 1 | FDS8876 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | GREEN LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | Heater | NetTie:NetTie-2_SMD_Pad0.5mm | R26 |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | JP1 |
| 1 | LM2655MTC-3.3/NOPB | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | LTC4313-1 | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.5mm_EP1.65x2.38mm | U9 |
| 1 | LVK12R050CER | Hestia:LVK12R010CER | R43 |
| 1 | MAWSON ROVERS | Hestia:Logo_Mawson_Rovers_2 | LOGO1 |
| 1 | MSP430F2618TPN_Simplifed | Package_QFP:LQFP-80_12x12mm_P0.5mm | U2 |
| 1 | RED LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | SK34A-LTP | Diode_SMD:D_SMA | D6 |
| 1 | SMARTSATCRC | Hestia:Logo_SmartSatCRC | LOGO3 |
| 1 | SPIRALBLUE | Hestia:Logo_SpiralBlue | LOGO4 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | SW_Push_Open | Hestia:Thermal Switch | SW2 |
| 1 | Serial Connector | Hestia:MolexPicoLock_6Way_2MP | J1 |
| 1 | TXB0104PW | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U8 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP7 |
| 1 | UTS | Hestia:Logo_UTS_2 | LOGO2 |
| 1 | VREF+ | TestPoint:TestPoint_Pad_D2.0mm | J5 |
| 1 | i2c connector | Hestia:MolexPicoLock_6Way_2MP | J2 |

mlab-modules/TEMPSEN01
Temperature sensor MAX31725 (16bit, I2C) intended for the use in connection with PX4 autopilot.

kenchangh/kensat
KENSAT, Edge-AI Compute in Orbit - A 2U CubeSat that runs a large language model on-orbit. A power-gated NVIDIA Jetson Orin Nano executes neural-network inference in space, and the results are downlinked over a custom…

macnetic/rp2040-cubesat
A CubeSat Onboard Computer, using the RP2040 microcontroller.


ngrabbs/ember
Open pvpanel.kicadpro with KiCad 10. The project contains the recovered schematic, routed PCB, project-local footprint libraries, and solar-module STEP model.


JaronCyna/sat_mppt_pcb
Maximum Power Point Tracking board meant for use in the QSET 3U CubeSat

It measures 90.2 × 95.9 mm and has 4 copper layers, 1.58 mm thick.
184 parts, built around the MAX31725MTA+T, ADS7828E, TXB0104PW and MMZ1608A222BTA00. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mawson-rovers/hestia repository on GitHub, at the commit this page was made from: the board is hestia-pcb/hestia.kicad_pcb and its schematic hestia-pcb/PC104.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).