
Control Board
briandorey/ESP32-RGB-Microscope-LED-Ring-Light
RGB LED ring light for a microscope with an ESP32 controller

RGB LED ring light for a microscope with an ESP32 controller
LED Ring is an open-source printed circuit board by briandorey, from the briandorey/ESP32-RGB-Microscope-LED-Ring-Light repository on GitHub, published under the MIT licence. It is a 2-layer board with 99 parts on 48 nets, routed with 389 tracks and 68 vias.
It is built around the WS2812B. Its parts include 46 capacitors and 46 diodes.
ESP32 based RGB LED controller and LED ring for a microscope
The PCB files are in Diptrace format.
The firmware folder contains the firmware for the ESP32 module
The 3D Models folder contains design files for the plastic case.
More details about this project are on my blog at https://www.briandorey.com/post/esp32-rgb-led-microscope-ringlight
| Qty | Value | Footprint | References |
|---|---|---|---|
| 46 | CAP_0603 | CAP_0402 | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +30 |
| 46 | WS2812B | WS2812B | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +30 |
| 2 | SMD/RREC2.0X4.0 | Lead_2.00mm | GND0, V+0 |
| 1 | dummyfp3 | UNK_HOLE_3 | |
| 1 | dummyfp2 | UNK_HOLE_2 | |
| 1 | dummyfp0 | UNK_HOLE_0 | |
| 1 | dummyfp1 | UNK_HOLE_1 | |
| 1 | SMD/RREC2.0X4.0 | Lead_1.00mm | DIN0 |

briandorey/ESP32-RGB-Microscope-LED-Ring-Light
RGB LED ring light for a microscope with an ESP32 controller

briandorey/ESP32-RGB-Microscope-LED-Ring-Light
RGB LED ring light for a microscope with an ESP32 controller

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



99 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the briandorey/ESP32-RGB-Microscope-LED-Ring-Light repository on GitHub, at the commit this page was made from: the board is PCB Files/Kicad/LED Ring/LED Ring.kicad_pcb and its schematic PCB Files/Kicad/Control Board/Control Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).