

Pcb v4
this is version 4 right now
- Size
- 116.5 × 55.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 60
- Pads
- 211
- Tracks, vias
- 286, 87
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 Mar 2025
- Updated
- 20 Mar 2025
Overview
Pcb v4 is an open-source printed circuit board by Brent-Dickinson, from the Brent-Dickinson/SDP_PCB repository on GitHub. It is a 2-layer board of 116.5 × 55.5 mm with 53 parts on 60 nets, routed with 286 tracks and 87 vias.
It is built around the ESP32-DEVKITC-VE, LM2576HVS-3.3 and LM2576HVS-5, with the EG2201B among its other parts. Its parts include 15 connectors, 11 resistors, 7 capacitors, 6 diodes and 3 ICs. It belongs with the ESP32 boards of this library.
Main components
4ESP32-DEVKITC-VE
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesLM2576HVS-3.3
TO-263-5-40℃~+125℃@(TJ) 1 10mA 3.3V 3A 4V~60V 52kHz Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM2576HVS-5
TO-263-5-40℃~+125℃ 1 4V~60V 52kHz Buck Buck TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersEG2201B
插件-20℃~+70℃ 200mA 30V DPDT PC Pin Rectangular Columnar Through Hole 插件 Slide Switches ROHSE-SwitchSlide Switches
README
README.mdLog Analysis Tool
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C5, C6, C7 |
| 4 | DNP | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R9, R10, R11 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5, R6 |
| 2 | 100uF | WurthE:CP_Wurth_WCAP-PSLP-D5L5.5 | CP1, CP2 |
| 2 | 100uH | WE-PD:L_Wurth_WE-PD-1245 | L1, L2 |
| 2 | 150 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R7 |
| 2 | 1N5822 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D2, D3 |
| 2 | 1mF | WurthE:CP_Wurth_WCAP-ASLI-D12.5L14 | CP3, CP4 |
| 1 | 300 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 3V3 PWR | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | LED2 |
| 1 | 5V PWR | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | LED3 |
| 1 | 68 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | ACTIVITY | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | LED4 |
| 1 | ADCs | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J8 |
| 1 | BTRY IN | jst_xh:JST_B2B-XH-A | J1 |
| 1 | BTRY PWR | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | LED1 |
| 1 | Boot | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J16 |
| 1 | DACs | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J9 |
| 1 | EG2201B | switch_eg2201_dpdt:SW_EG2201B | S1 |
| 1 | ESC | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U3 |
| 1 | GPIOs | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J15 |
| 1 | LM2576HVS-3.3 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | LM2576HVS-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | Lidar1 | quiic_jst:CONN_SM04B-SRSS-TB_JST | J10 |
| 1 | Lidar2 | quiic_jst:CONN_SM04B-SRSS-TB_JST | J13 |
| 1 | Lidar3 | quiic_jst:CONN_SM04B-SRSS-TB_JST | J14 |
| 1 | MSD4-2-A | microsd:CUI_MSD4-2-A | J7 |
| 1 | Mageto | quiic_jst:CONN_SM04B-SRSS-TB_JST | J3 |
| 1 | Nav Board | quiic_jst:CONN_SM04B-SRSS-TB_JST | J2 |
| 1 | PWR | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J12 |
| 1 | RX/TX | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | Servo | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
Similar boards
- 2 layers77.4 × 65.2 mm

- 2 layers122 × 94 mm

- 2 layers127.5 × 90 mm

- 4 layers181.7 × 80 mm

- 4 layers222 × 100 mm

HydroScan V1
paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA
Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…
156 parts1 - 4 layers110 × 90 mm

PLC V1
paulmartinezcuenta/UltiCore-V1-PLC
Custom industrial-grade PLC and logic controller engineered around the ESP32 platform.
202 parts1MIT - 2 layers

Shop guard
Aust1nke/Security_shop_guard
I built this pcb using esp32, and lidar sensor to monitor and alert shop owner of intruders
29 parts - 2 layers150 × 130 mm

Questions
How big is the Pcb v4 PCB?
It measures 116.5 × 55.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcb v4 use?
53 parts, built around the ESP32-DEVKITC-VE, LM2576HVS-3.3, LM2576HVS-5 and EG2201B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb v4 KiCad files?
From the Brent-Dickinson/SDP_PCB repository on GitHub, at the commit this page was made from: the board is pcb v4.kicad_pcb and its schematic pcb v4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb v4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Brent-Dickinson before reusing the design.