Skip to the content
2 layers150 × 130 mmGarden Board, the printed circuit board in 3D

Garden Board

bvs7/gemini-home

Poll a Nest Thermostat and track temperature data

Full screenGitHub.kicad_pcb
Size
150 × 130 mm
Copper layers
2
Thickness
1.6 mm
Parts
68
Nets
55
Pads
190
Tracks, vias
308, 3
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
26 Jun 2021
Updated
10 Dec 2022

Overview

Garden Board is an open-source printed circuit board by bvs7, from the bvs7/gemini-home repository on GitHub. It is a 2-layer board of 150 × 130 mm with 68 parts on 55 nets, routed with 308 tracks and 3 vias.

It is built around the LM2576HVS-3.3, HC-SR04 and MBR360, with the OMI-SH-112LM,000 among its other parts. Its parts include 21 diodes, 17 connectors, 10 resistors, 6 switches and 5 transistors. It belongs with the ESP8266 and AVR (ATmega, ATtiny) boards of this library.

Main components

4

Parts

68
QtyValueFootprintReferences
10DDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD2, D3, D6, D7, D10, D11, D14, D15, D18, D19
10LED LimitResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8, R9, R10
5TIP12XPackage_TO_SOT_THT:TO-220-3_VerticalQ1, Q2, Q3, Q4, Q5
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
11000uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC2
1100uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC1
1100uHInductor_THT:L_Radial_D9.5mm_P5.00mm_Fastron_07HVPL1
1A2Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ11
1A3Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ12
1A4Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ13
1A5Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ14
1A6Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ15
1A7Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ16
1Arduino_Pro_MiniArduino:Arduino_Pro_MiniU2
1Barrel_JackCommon:PJ-037AH_Barrel_JackJ1
1ESP8266_BreakoutConnector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_VerticalJ3
1ESP_RX_SELConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ5
1ESP_TX_SELConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ6
1HC-SR04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ9
1LED_CTRL0LED_THT:LED_D4.0mmD20
1LED_CTRL1LED_THT:LED_D4.0mmD4
1LED_CTRL2LED_THT:LED_D4.0mmD8
1LED_CTRL3LED_THT:LED_D4.0mmD12
1LED_CTRL4LED_THT:LED_D4.0mmD16
1LED_SENSE0LED_THT:LED_D4.0mmD17
1LED_SENSE1LED_THT:LED_D4.0mmD1
1LED_SENSE2LED_THT:LED_D4.0mmD5
1LED_SENSE3LED_THT:LED_D4.0mmD9
1LED_SENSE4LED_THT:LED_D4.0mmD13
1LM2576HVS-3.3Package_TO_SOT_THT:TO-220-5_Horizontal_TabDownU1
1MBR360Diode_THT:D_DO-27_P12.70mm_HorizontalD21
1OMI-SH-112LM,000Common:Relay_OMI-SH-112LMK1
1P0TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ17
1P0 RELAY BYPASSConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ18
1P1TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ2
1P2TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ4
1P3TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ7
1P4TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ8
1SW0Common:Switch_RA1153SW0
1SW1Common:Switch_RA1153SW1
1SW2Common:Switch_RA1153SW2
1SW3Common:Switch_RA1153SW3
1SW4Common:Switch_RA1153SW4

More from bvs7/gemini-home

1
  • 2 layers32 × 40 mmSolenoid Unit, the printed circuit board in 3D

    Solenoid Unit

    bvs7/gemini-home

    Poll a Nest Thermostat and track temperature data

    16 parts

Similar boards

  • 2 layers71.1 × 100.3 mmStepper, the printed circuit board in 3D

    Stepper

    pavel-ruban/TB6560AHQ-stepper-driver

    Stepper Driver, used to drive 1.6-7 A motors

    89 parts1
  • 4 layers110.1 × 76.6 mmRS232 TO MCU, the printed circuit board in 3D

    RS232 TO MCU

    ahsan105/SIM800_GSM_PCB_design

    Custom-designed GSM communication PCB using SIM800 with UART, RS232 level shifting, and power circuitry (KiCad)

    48 parts
  • 2 layers150 × 130 mmSTM32-Automotive BCM Development Board, the printed circuit board in 3D

    STM32-Automotive BCM Development Board

    Akinlatauto19/STM32-Automotive-BCM-Development-Board

    Automotive Body Control Module (BCM) development board designed around an STM32 microcontroller, featuring relay-based automotive outputs, power management, protection circuitry, and a custom KiCad PCB.

    89 partsCERN-OHL-S-2.0
  • 2 layers60 × 150 mmPhone, the printed circuit board in 3D

    Phone

    TheEinfachFelix/CampPhone

    Warum habe ich mich dagegen entschieden, das Sim Modul selber zu implementieren? Ich habe kein Chip gefunden, der günstiger als das fertige Modul war, und ein Datenblatt in Englischer Sprache hat.

    137 parts
  • 4 layers181.7 × 80 mmLaserharp, the printed circuit board in 3D

    Laserharp

    heimdallaustria/Laserharp

    125 parts1
  • 4 layers222 × 100 mmHydroScan V1, the printed circuit board in 3D

    HydroScan V1

    paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA

    Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…

    156 parts1

Questions

How big is the Garden Board PCB?

It measures 150 × 130 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Garden Board use?

68 parts, built around the LM2576HVS-3.3, HC-SR04, MBR360 and OMI-SH-112LM,000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Garden Board KiCad files?

From the bvs7/gemini-home repository on GitHub, at the commit this page was made from: the board is KiCad/Garden_Board/Garden_Board/Garden_Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Garden Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask bvs7 before reusing the design.