
TasaruV0.0.1
ThatguyCplus/throttleECU
STM32F411CE Throttle ECU — PID position control with AS5048A encoder, H-bridge motor, safety module

Laserharp is an open-source printed circuit board by heimdallaustria, from the heimdallaustria/Laserharp repository on GitHub. It is a 4-layer board of 181.7 × 80 mm with 125 parts on 107 nets, routed with 1,577 tracks and 199 vias.
It is built around the TS912AIDT, LM2576HVS-3.3 and MAX11617EEE+, with the G12JPF and SQJ147ELP-T1_GE3 among its other parts. Its parts include 41 resistors, 38 capacitors, 31 ICs, 7 connectors and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28 +9 |
| 12 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36 |
| 12 | 100 | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13 |
| 12 | 1nF | Capacitor_SMD:C_0603_1608Metric | C4, C6, C8, C10, C12, C14, C16, C18, C20, C22, C24, C26 |
| 12 | 22pF | Capacitor_SMD:C_0603_1608Metric | C3, C5, C7, C9, C11, C13, C15, C17, C19, C21, C23, C25 |
| 12 | MCP4725 | Package_TO_SOT_SMD:SOT-23-6 | U1, U4, U5, U6, U7, U8, U9, U10, U12, U13, U14, U15 |
| 6 | OPA2381AIDGKT | Package_SO:MSOP-8_3x3mm_P0.65mm | U22, U23, U24, U25, U26, U27 |
| 6 | TS912AIDT | Package_SO:Diodes_SO-8EP | U18, U19, U20, U28, U29, U30 |
| 4 | Conn_01x12_Socket | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J1, J2, J3, J4 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4_DIN965 | H1, H2, H3, H4 |
| 3 | MCP4432 | Laser_Harp:SOP65P640X120-14N | U11, U16, U17 |
| 2 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J6, J7 |
| 2 | TCA9548AMRGER | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U2, U3 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R40 |
| 1 | 130 | Resistor_SMD:R_0805_2012Metric | R39 |
| 1 | 1N5822 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | 30 | Resistor_SMD:R_0603_1608Metric | R41 |
| 1 | 470uF | Capacitor_SMD:CP_Elec_8x10 | C38 |
| 1 | 470uF | Laser_Harp:CAP_EEEFT1E471AV | C37 |
| 1 | Conn_01x06_Socket | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | G12JPF | Laser_Harp:PinSocket_2x03_P2.54mm_Vertical_editpin | SW1 |
| 1 | L | Inductor_SMD:L_Bourns_SRR1210A | 220uH1 |
| 1 | LM2576HVS-3.3 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U31 |
| 1 | MAX11617 | Package_SO:QSOP-16_3.9x4.9mm_P0.635mm | U21 |
| 1 | R_Small | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | SQJ147ELP-T1 | Package_SO:PowerPAK_SO-8_Single | Q1 |

ThatguyCplus/throttleECU
STM32F411CE Throttle ECU — PID position control with AS5048A encoder, H-bridge motor, safety module

rice-robotics-club/Rover-ELEC
Repo for all you rover elec fiends


paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA
Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…

paulmartinezcuenta/UltiCore-V1-PLC
Custom industrial-grade PLC and logic controller engineered around the ESP32 platform.


Aust1nke/Security_shop_guard
I built this pcb using esp32, and lidar sensor to monitor and alert shop owner of intruders

It measures 181.7 × 80 mm and has 4 copper layers, 1.6 mm thick.
125 parts, built around the TS912AIDT, LM2576HVS-3.3, MAX11617EEE+ and G12JPF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the heimdallaustria/Laserharp repository on GitHub, at the commit this page was made from: the board is Kicad/Laser_Harp.kicad_pcb and its schematic Kicad/Laser_2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask heimdallaustria before reusing the design.