
G602
mastersan-mh/unitra-G602-digital
The Unitra-G602 (Vega 109/119) elecrophone modernisation: Digital control.

ESPHome AC Monitor is an open-source printed circuit board by Alfaa123, from the Alfaa123/ESPHome_AC_Monitor repository on GitHub. It is a 2-layer board of 45 × 78 mm with 26 parts on 40 nets, routed with 110 tracks and 6 vias.
It is built around the ESP32-WROVER-E(4MB), MAX31855KASA+T and LM2576S-3.3, with the DF01M and MBR360 among its other parts. Its parts include 9 capacitors, 5 ICs, 4 connectors, 2 diodes and 1 resistor. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1uF | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C3, C5, C6, C7 |
| 2 | 0.1uF | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C2, C4 |
| 2 | MAX31855KASA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 22uF | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C1 |
| 1 | 24VAC_SUPPLY | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | 300uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C8 |
| 1 | 330uH | Inductor_SMD:L_Bourns_SRR1260 | L1 |
| 1 | 500uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C9 |
| 1 | BOOT_SEL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | DEBUG | Connector_Wire:SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm | J1 |
| 1 | DF01M | Diode_THT:Diode_Bridge_DIP-4_W7.62mm_P5.08mm | D1 |
| 1 | ESP32-WROVER-E | PCM_Espressif:ESP32-WROVER-E | U1 |
| 1 | LM2576S-3.3 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U5 |
| 1 | MBR360 | Diode_THT:D_DO-201_P12.70mm_Horizontal | D2 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | T/C_1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | T/C_2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | XGZP6899D | Sensor_Pressure:CFSensor_XGZP6899x | U2 |
The 24 most common of 26 parts.

mastersan-mh/unitra-G602-digital
The Unitra-G602 (Vega 109/119) elecrophone modernisation: Digital control.





ahsan105/SIM800_GSM_PCB_design
Custom-designed GSM communication PCB using SIM800 with UART, RS232 level shifting, and power circuitry (KiCad)

Akinlatauto19/STM32-Automotive-BCM-Development-Board
Automotive Body Control Module (BCM) development board designed around an STM32 microcontroller, featuring relay-based automotive outputs, power management, protection circuitry, and a custom KiCad PCB.

It measures 45 × 78 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the ESP32-WROVER-E(4MB), MAX31855KASA+T, LM2576S-3.3 and DF01M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Alfaa123/ESPHome_AC_Monitor repository on GitHub, at the commit this page was made from: the board is ESPHomeACMonitor.kicad_pcb and its schematic ESPHomeACMonitor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Alfaa123 before reusing the design.