BRA1L0R/panda-pcbPandahat is an open-source printed circuit board by BRA1L0R, from the BRA1L0R/panda-pcb repository on GitHub. It is a 2-layer board of 83 × 56 mm with 116 parts on 104 nets, routed with 692 tracks and 144 vias.
It is built around the STM32F103C8T6, LM2596-5.0FW05ARHQ and AMS1117-3.3, with the 1N5819WS, CC0603KRX7R9BB104 and B2B-PH-K-S(LF)(SN) among its other parts. Its parts include 35 diodes, 30 resistors, 17 connectors, 16 capacitors and 4 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 1N5819WS | easyeda2kicad:SOD-323_L1.8-W1.3-LS2.5-RD | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +10 |
| 17 | 0603WAF1003T5E | easyeda2kicad:R0603 | R1, R2, R3, R4, R5, R6, R7, R8, R10, R16, R18, R19, R20, R22, R27, R34 +1 |
| 7 | Wago connector | easyeda2kicad:CONN-TH_4P-P3.50_2601-1102 | CN1, CN2, CN3, CN4, CN5, CN6, CN7 |
| 6 | 0603WAF1500T5E | easyeda2kicad:R0603 | R24, R28, R29, R30, R31, R32 |
| 6 | CC0603KRX7R9BB104 | easyeda2kicad:C0603 | C8, C9, C10, C11, C12, C13 |
| 5 | 0603WAF1002T5E | easyeda2kicad:R0603 | R21, R25, R26, R35, R36 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP4, TP6, TP17, TP18 |
| 4 | B2B-PH-K-S | easyeda2kicad:CONN-TH_B2B-PH-K-S | CN13, CN14, CN15, CN16 |
| 4 | CL31A226KAHNNNE | easyeda2kicad:C1206 | C4, C6, C7, C21 |
| 4 | Green LED | easyeda2kicad:LED0805-R-RD | LED1, LED4, LED5, LED6 |
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4 |
| 3 | RVT16V330M6X8 | easyeda2kicad:CAP-SMD_BD6.3-L6.6-W6.6-LS7.2-FD_3 | C2, C3, C5 |
| 2 | 0603WAF3002T5E | easyeda2kicad:R0603 | R17, R23 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J19, J20 |
| 2 | FC-2012HRK-620D | easyeda2kicad:LED0805-RD | LED2, LED3 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SS54_C22452 | easyeda2kicad:SMA_L4.4-W2.8-LS5.4-R-RD | D2, D29 |
| 1 | 100nF | easyeda2kicad:C0603 | C20 |
| 1 | 47uH | easyeda2kicad:IND-SMD_L7.2-W6.6_GPSR07X0 | L2 |
| 1 | AMS1117-3.3 | easyeda2kicad:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U1 |
| 1 | CL21B105KBFNNNE | easyeda2kicad:C0805 | C1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | JST 4PIN | easyeda2kicad:CONN-TH_B4B-PH-K-S | CN8 |
| 1 | LIS3DHTR_C15134 | easyeda2kicad:LGA-16_L3.0-W3.0-P0.50-TL | U5 |
| 1 | LM2596-5.0FW05ARHQ | easyeda2kicad:TO-263-5_L10.1-W8.7-P1.70-LS14.4-BR | U2 |
| 1 | SMBJ13CA_C19077568 | easyeda2kicad:SMB_L4.6-W3.6-LS5.4-BI | D1 |
| 1 | STM32F103C8T6 | easyeda2kicad:LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL | U3 |
| 1 | TS-1187A-B-A-B | easyeda2kicad:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW1 |
| 1 | ZER6H-6*10-2.5T | easyeda2kicad:TH-2_BD6.0-L10.0-P16.00-D0.6 | L1 |
| 1 | ~ | easyeda2kicad:C0603 | C14 |
It measures 83 × 56 mm and has 2 copper layers, 1.6 mm thick.
116 parts, built around the STM32F103C8T6, LM2596-5.0FW05ARHQ, AMS1117-3.3 and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BRA1L0R/panda-pcb repository on GitHub, at the commit this page was made from: the board is pandahat.kicad_pcb and its schematic analog.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BRA1L0R before reusing the design.
stevel1212-droid/stm32-rtc-climate-controller
Kicad project of an STM32-based board climate controller utilizing an RTC module for time-scheduled environmental reading of temperature/humidity with SHT30 sensor and optional small relay for control.
Simplycissmus/windowmaster-s3-controller
Open hardware and ESP32-S3 firmware for a local 24 V window actuator controller with MQTT and Home Assistant integration.
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
TIGP-Experimental-Methods/class-board-2026
TIGP class instrument 2026: one board, five blocks - KiCad hardware, ESP32-S3 firmware, phone PWA, Python API, workbook
CaptainDJMax/2627_Projet3AMSC_Index_Stellaire
Ceci est notre projet sur l'index stellaire
