6 layers235.1 × 213.7 mm
Quiver PT3 Main PCB rounded
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
164 parts617CERN-OHL-S-2.0
SMBJ13CA
MDDExtended
-65℃~+150℃ 13V 15.9V 1uA 21.5V 28A@10/1000us 600W@10/1000us Bidirectional TVS DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHS
- Part id
- mdd/SMBJ13CA
- Category
- ESD And Surge Protection (TVS, ESD)
- Package
- DO-214AA(SMB)
- Pins
- 2
- In stock
- 27,913 at JLCPCB (C113987)
- Used on
- 27 open-source boards
Overview
The SMBJ13CA is an ESD And Surge Protection made by MDD in a DO-214AA(SMB) package with 2 pins. -65℃~+150℃ 13V 15.9V 1uA 21.5V 28A@10/1000us 600W@10/1000us Bidirectional TVS DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHS.
PCBKit's library has its KiCad symbol (Device:D_TVS, from KiCad's library) and its footprint (Diode_SMD:D_SMB, from KiCad's library), ready for a KiCad board. 27,913 are in stock at JLCPCB (part C113987). 27 open-source boards in 12 repositories on GitHub use it.
Symbol
Footprint
Pinout
2| Pin | Name | Type |
|---|---|---|
| 1 | A1 | Passive |
| 2 | A2 | Passive |
- 2 layers154.5 × 105 mm
Interface brain
ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.
174 parts4Apache-2.0 - 4 layers120 × 103.9 mm
BALANCING CUBEV1.01
Evc-r/Balancing-Cube-STM32
STM32F411CEU6 and ICM-20948 v2 self-balancing cube firmware port and integration plan.
76 parts2 - 2 layers57 × 50 mm
Af4-trigger hat pre LED resistor change
kenbrinkman/af4-poe-trigger
DIY replacement for the inD connect dongle: ESPHome on an ESP32-POE-ISO triggers the aF4 frozen-food feeder's 0-10V port, scheduled from Home Assistant. Includes wiring, BOM, and printable enclosure
28 parts1 - 2 layers83 × 56 mm
- 2 layers140.5 × 106 mm
Pcbgalapagos
catuta0/HAB-payload
Carrier PCB for a high-altitude balloon payload. An ESP32 DevKitC V4 (WROOM-32) plugs into the board together with breakout modules for GPS (NEO-8M, I2C or UART header, fit only one), INA260 power monitor, BME280…
62 parts - 32 layers120 × 45 mm
Main 27M2
isarmg/pcie-switch-2
KiCad PCIe switch PCB design drafts: E1.S and M.2 boards, footprints, models and generation scripts.
730 parts - 2 layers120.1 × 69 mm
High Power DC Load Control Unit
muhammedsaifudeen/High_Power_DC_Load_Control_Unit
Designed and developed a 2 Layer PCB which has both high power component and low component .Using certain isolation and methods i have successfully design the control unit using stm32f103 which can drive load upto 2000W
85 parts
Parts like it
8
SMBJ13CA/TR13
SMB(DO-214AA)13V 14.4V 1uA 21.5V 28A 600W Bidirectional TVS SMB(DO-214AA) ESD and Surge Protection (TVS/ESD) ROHSBrightkingESD And Surge Protection (TVS/ESD)SMBJ13A
DO-214AA(SMB)-55℃~+150℃ 13V 15.9V 21.5V 27.91A@10/1000us 5uA 600W@10/1000us IEC 61000-4-2 TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)SMBJ13CA
DO-214AA(SMB)ESD And Surge Protection (TVS/ESD)hongjiachengSMBJ13CA
DO-214AA(SMB)-55℃~+150℃ 13V 14.4V 21.5V 27.9A 5uA 600W Bidirectional TVS DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)SMBJ13A
SMB-65℃~+150℃ 13V 15.9V 1uA 21.5V 28A 600W TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)SMBJ13A
SMB-65℃~+150℃ 13V 15.9V 1uA 21.5V 28A 390pF 600W@10/1000us TVS SMB ESD and Surge Protection (TVS/ESD) ROHSShandong Jingdao MicroelectronicsESD And Surge Protection (TVS/ESD)SMBJ13CA
DO-214AA-65℃~+150℃ 13V 15.9V 1uA 21.5V 28A 600W@10/1000us Bidirectional IEC 61000-4-2、IEC 61000-4-4 TVS DO-214AA ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)SMBJ13A
DO-214AA(SMB)-55℃~+150℃ 13V 15.9V 1uA 21.5V 27.9A@10/1000us 600W@10/1000us TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSBORNESD And Surge Protection (TVS/ESD)
Questions
Is there a KiCad symbol and footprint for the SMBJ13CA?
Yes. The symbol is Device:D_TVS and the footprint Diode_SMD:D_SMB, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SMBJ13CA?
DO-214AA(SMB), with 2 pins. Its footprint is drawn on this page.
Where is the SMBJ13CA datasheet?
MDD publishes it: the Datasheet link on this page opens it.
Where can I order the SMBJ13CA?
JLCPCB lists it as part C113987, with 27,913 in stock; the sellers' links on this page open their listings.
What can replace the SMBJ13CA?
Parts like it in the library: the SMBJ13CA/TR13 by Brightking, the SMBJ13A by hongjiacheng, the SMBJ13CA by hongjiacheng and the SMBJ13CA by GOODWORK. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SMBJ13CA?
27 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.