2 layers86 × 50 mm
2 layers95 × 95 mm
Semuino
bpmine/modules_uinoQuelques modules à base d'arduino
- Size
- 95 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 62
- Pads
- 191
- Tracks, vias
- 346, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Feb 2021
- Updated
- 17 Oct 2026
Overview
Semuino is an open-source printed circuit board by bpmine, from the bpmine/modules_uino repository on GitHub. It is a 2-layer board of 95 × 95 mm with 60 parts on 62 nets, routed with 346 tracks and 12 vias.
It is built around the 2N2222A. Its parts include 17 resistors, 14 connectors, 8 transistors, 8 fuses and 4 capacitors. It belongs with the ESP8266 and AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdmodules_uino
Quelques modules à base d'arduino
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R2, R3, R9, R10, R11, R12, R13, R14 |
| 6 | 2A | Fuse:Fuseholder_TR5_Littelfuse_No560_No460 | F3, F4, F5, F6, F7, F8 |
| 4 | 220 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R1, R6, R7, R8 |
| 4 | 2N2222A | Package_TO_SOT_THT:TO-92 | Q1, Q3, Q4, Q5 |
| 4 | P03P4L-04 | Package_TO_SOT_THT:TO-220-3_Vertical | Q2, Q6, Q7, Q8 |
| 3 | 100 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R15, R16, R17 |
| 2 | 100nF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C2, C3 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4, R5 |
| 2 | 20µF | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C1, C4 |
| 2 | Select | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J14 |
| 1 | 12V_POWER_IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | 12V_POWER_OUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J3 |
| 1 | 500mA | Fuse:Fuseholder_TR5_Littelfuse_No560_No460 | F1 |
| 1 | 5A | Fuse:Fuseholder_Clip-5x20mm_Littelfuse_520_Inline_P20.50x5.80mm_D1.30mm_Horizontal | F2 |
| 1 | 5V_POWER_IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J4 |
| 1 | Arduino_Nano_v2.x | bpc:BPC_Arduino_Nano | A1 |
| 1 | BPC_Alim3_3V | bpc:BPC_Alim3_3V | U4 |
| 1 | BPC_DHT22 | bpc:BPC_DHT22 | U3 |
| 1 | BPC_ESP8266-01_ESP-01 | bpc:BPC_XCVR_ESP8266-01_ESP-01 | U2 |
| 1 | Earth humidity sensor | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-5-2.54_1x05_P2.54mm_Horizontal | J13 |
| 1 | POW LED 1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J8 |
| 1 | POW LED 2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J9 |
| 1 | POW LED 3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J10 |
| 1 | RF ON/OFF | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | RGB 1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J5 |
| 1 | RGB 2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J6 |
| 1 | RGB 3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J7 |
| 1 | RtcArduino | bpc:BPC_RtcArduino | U1 |
| 1 | Screen | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J12 |
The 56 most common of 60 parts.
More from bpmine/modules_uino
2- 2 layers78 × 30 mm
Similar boards
- 2 layers101.5 × 83 mm
- 2 layers279.4 × 203.2 mm
Z180GDC
lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller
249 parts12 - 2 layers99.1 × 99.1 mm
QL Qsound10x10
alvaroalea/QL_QsoundQprint_clone
A clone board of the Sound card for the Sinclair QL Computer.
23 parts11 - 2 layers156.5 × 67.5 mm
NixieScanDisplay
profdc9/NixieClock
A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.
106 parts10 - 2 layers89.3 × 50 mm
MM58167-ISA RTC
jensma-de/MM58167-ISA-RTC
RTC module for the ISA slot. With schematics, project files in kicad and open source software to drive the clock.
29 parts9 - 2 layers97.6 × 76.8 mm
- 2 layers14.6 × 13.6 mm
Chip and transistor
gidim/e61-gauge
An analog temperature gauge for E61 espresso machines. A custom PCB drives a VID6606 stepper motor gauge needle, reading temperature from an NTC thermistor.
15 parts8 - 2 layers147.2 × 58.3 mm
Li IonBatteryProtection
cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
81 parts6MIT
Questions
How big is the Semuino PCB?
It measures 95 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Semuino use?
60 parts, built around the 2N2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Semuino KiCad files?
From the bpmine/modules_uino repository on GitHub, at the commit this page was made from: the board is semuino/board/semuino/semuino.kicad_pcb and its schematic lcduino/hard/lcduino.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Semuino design in my own project?
Its repository states no licence, so its author keeps all rights: ask bpmine before reusing the design.