
Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover

Pichardo is an open-source printed circuit board by BotPyke, from the BotPyke/Electiva-Mecatronica repository on GitHub. It is a 2-layer board of 19.9 × 18.4 mm with 21 parts on 18 nets, routed with 114 tracks and 54 vias.
It is built around the NRF24L01. Its parts include 11 capacitors, 4 inductors, 2 resistors, 1 IC and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | C_Small | Capacitor_SMD:C_0402_1005Metric | C6, C9 |
| 2 | Cx | Capacitor_SMD:C_0402_1005Metric | C10, C11 |
| 1 | 1.5p | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 10M | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 16MHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 1p | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 2.7n | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 3.9n | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 33n | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 8.2n | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | Antenna | RF_Antenna:Texas_SWRA117D_2.4GHz_Right | AE1 |
| 1 | Conn_01x08_Pin | Connector_Hirose:Hirose_DF13-08P-1.25DSA_1x08_P1.25mm_Vertical | J1 |
| 1 | Lx | Inductor_SMD:L_0402_1005Metric | L4 |
| 1 | NRF24L01 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |

NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover

DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system

CGrassin/biosignals
Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).

microdynamics-robot-quadcopter/breeze_electronics_design
This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.




It measures 19.9 × 18.4 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the NRF24L01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BotPyke/Electiva-Mecatronica repository on GitHub, at the commit this page was made from: the board is pichardo.kicad_pcb and its schematic pichardo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BotPyke before reusing the design.