bobbarnes1981/wled-controllerA controller board for wled with the following features
Wled pcb is an open-source printed circuit board by bobbarnes1981, from the bobbarnes1981/wled-controller repository on GitHub. It is a 2-layer board of 90.2 × 90.2 mm with 36 parts on 57 nets, routed with 200 tracks and 1 via.
It is built around the ESP32-DEVKITC-VE and BC337. Its parts include 10 resistors, 6 connectors, 4 diodes, 4 fuses and 3 ICs. It belongs with the ESP32 boards of this library.
A controller board for wled with the following features
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 62R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 4 | Fuse | Fuse:Fuseholder_Blade_Mini_Keystone_3568 | F1, F2, F3, F4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J3, J4, J5, J7 |
| 3 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R7, R8 |
| 3 | LED | LED_THT:LED_D5.0mm | D2, D3, D4 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R10 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH-12mm_Wuerth-430476085716 | SW1, SW2 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C1 |
| 1 | 150R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 74125 | Package_DIP:DIP-14_W7.62mm_LongPads | U2 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | Conn_02x03_Counter_Clockwise | Package_DIP:DIP-6_W7.62mm_LongPads | J2 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U1 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U3 |
| 1 | Relay_SPDT | Relay_THT:Relay_SPDT_Omron_G2RL-1-E | K1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J6 |
It measures 90.2 × 90.2 mm and has 2 copper layers, 1.6 mm thick.
36 parts, built around the ESP32-DEVKITC-VE and BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bobbarnes1981/wled-controller repository on GitHub, at the commit this page was made from: the board is wled-pcb/wled-pcb.kicad_pcb and its schematic wled-pcb/wled-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bobbarnes1981 before reusing the design.
AymericSoulas/TeleSchtroumpf
A short projet for animating children activities around the smurf's universe. A device with a mushroom shape which you can send phrases to. It will the translate them in morse code and flash them on a light.
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.
cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.
ste2425/PSP-Bluetooth-AVConnector
An AV-Out Breakout library for the PSP. Providing Kicad symbols and footprints to interface with the PSP 2/3K AVOut socket (also known as the TVOut socket)
