

Blus mini mk2
Audio hardware
- Size
- 76.5 × 76.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 168
- Nets
- 218
- Pads
- 702
- Tracks, vias
- 934, 415
- Pours
- 353
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Apr 2021
- Updated
- 15 Jun 2026
Overview
Blus mini mk2 is an open-source printed circuit board by blus-audio, from the blus-audio/hardware repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 76.5 × 76.9 mm with 168 parts on 218 nets, routed with 934 tracks and 415 vias.
It is built around the STM32H723VGT6, USB3300-EZK-TR and TAS2780RYAR, with the TPS54302DDC, SN74LVC1GU04DRL and AMS1117-1.8 among its other parts. Its parts include 86 capacitors, 43 resistors, 12 ICs, 11 connectors and 4 diodes. It belongs with the STM32 and NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
12STM32H723VGT6
LQFP-100(14x14)-40℃~+85℃ 1.71V~3.6V 12bit 12bit、16bit 1MB 32 Bit 550MHz 564KB 80 ARM Cortex-M7 Built-in+External FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)USB3300-EZK-TR
QFN-32-EP(5x5)-40℃~+85℃ 3V~3.6V 480Mbps 54.7mA 83uA Transceiver USB 2.0 QFN-32-EP(5x5) USB Converters ROHSMicrochip TechnologyUSB ConvertersTAS2780RYAR
HRQFN-30(4x3.5)-40℃~+85℃ 1% 1-Channel 110dB 118dB 30W×1@4Ω、25W×1@4Ω 3V~24V 83%、85%、89%、93% Class D Enable/shutdown function HRQFN-30(4x3.5) Audio Amplifiers ROHSTexas InstrumentsAudio AmplifiersTPS54302DDC
TSOT-23-6-40℃~+125℃@(TJ) 1 3A 4.5V~28V 400kHz 45uA Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersSN74LVC1GU04DRL
SOT-553-40℃~+125℃ 1 1.24V~4.13V 1.65V~5.5V 10uA 3.5ns@5V,50pF 32mA 32mA 410mV~1.38V 74LVC Power shutdown protection SOT-553 Inverters ROHSTexas InstrumentsInvertersAMS1117-1.8
SOT-223-40℃~+125℃@(Tj) 0.003%Vout 1 1.3V@(1A) 1.8V 15V 1A 72dB@(120Hz) Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-6L-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A 6V ESD IEC 61000-4-2 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)CL05B104KB54PNC
0402100nF 50V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT0402WGF330J
0402-55℃~+155℃ 33Ω 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface MountCL31A106KBHNNNE
120610uF 50V X5R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCL10A105KB8NNN
06031uF 50V X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
README
blus-mini/kicad/README.mdHardware design files
Parts
168| Qty | Value | Footprint | References |
|---|---|---|---|
| 43 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C3, C11, C12, C15, C16, C18, C21, C24, C25, C28, C29, C31, C34, C37, C38 +27 |
| 14 | 33 | Resistor_SMD:R_0402_1005Metric | R1, R2, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R23, R24 |
| 13 | 10u | Capacitor_SMD:C_1206_3216Metric | C6, C7, C19, C20, C32, C33, C67, C69, C70, C71, C72, C74, C75 |
| 12 | 1u | Capacitor_SMD:C_0603_1608Metric | C9, C13, C17, C22, C26, C30, C35, C39, C43, C77, C81, C85 |
| 10 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C10, C23, C36, C46, C48, C50, C55, C56, C57, C78 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R25, R33, R34, R38, R41, R42 |
| 5 | 4.7k | Resistor_SMD:R_0402_1005Metric | R3, R4, R31, R32, R36 |
| 5 | Screw_Terminal_01x02 | Connector_Terminal:wuerth_691216410002 | J1, J8, J9, J10, J11 |
| 4 | 10p | Capacitor_SMD:C_0402_1005Metric | C14, C27, C40, C82 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R15, R16, R17, R43 |
| 4 | 330 | Resistor_SMD:R_0402_1005Metric | R26, R27, R28, R29 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 4 | TAS2780 | Package_TI_QFN:TI-30-Pin-HR-QFN | U2, U3, U4, U12 |
| 3 | 10n | Capacitor_SMD:C_0402_1005Metric | C2, C4, C45 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R18, R22 |
| 2 | 220 | Resistor_SMD:R_0402_1005Metric | R19, R20 |
| 2 | 470 | Resistor_SMD:R_0402_1005Metric | R39, R40 |
| 2 | Conn_Coaxial | Connector_Audio_Custom:cui_rcj_02x | J4, J5 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R35 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R30 |
| 1 | 13.7k | Resistor_SMD:R_0402_1005Metric | R37 |
| 1 | 4.7n | Capacitor_SMD:C_0402_1005Metric | C44 |
| 1 | 4.7u | Inductor_SMD:L_Abracon_ASPI-0630LR | L1 |
| 1 | 74LVC1GU04DRL | Package_TO_SOT_SMD:SOT-553 | U5 |
| 1 | 75 | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | AMS1117-1.8 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U11 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U10 |
| 1 | ASE-24 MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X2 |
| 1 | ASE-24.576 MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | Blue | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Conn_02x08_Odd_Even | Connector_IDC:IDC-Header_2x08_P2.54mm_Horizontal | J3 |
| 1 | DA100J | Transformer_Audio:SOIC-6 | T1 |
| 1 | Green | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | NRST | Button_Switch_SMD:SW_SPST_TL3342 | SW2 |
| 1 | REDFIT_SWD_10 | Connector_Debug:WR-WST REDFIT IDC 6 10 DBG | J6 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV1 |
| 1 | Raspberry_Pi_2_3 | Connector_Rpi:PinSocket_2x20_P2.54mm_Vertical | J2 |
| 1 | Red | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | STM32H723VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U8 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
| 1 | TPS54302 | Package_TO_SOT_SMD:SOT-23-6 | U9 |
| 1 | TSOP583xx | OptoDevice:Vishay_MINICAST-3Pin | U1 |
| 1 | USB3300-EZK | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U7 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | USB_B | Connector_USB:USB_B_TE_5787834_Vertical | J7 |
| 1 | Yellow | LED_SMD:LED_0603_1608Metric | D3 |
More from blus-audio/hardware
1- 4 layers76 × 76.9 mm

Similar boards
- 4 layers33.5 × 66.8 mm

Net bmp
elagil/net-bmp
An Ethernet-connected SWD/JTAG debug adapter (blackmagic probe)
97 parts3GPL-3.0 - 4 layers72.6 × 47.5 mm

- 4 layers42 × 65 mm

Icarus Flight Computer
daedalus-ind/icarus-hardware
Hardware of the onboard flight computer for the Icarus rocket.
106 parts2MIT - 4 layers50 × 20 mm

GigaPower200V
kaminaris/GigaESC-Power200V
Compact 50 × 20 mm non-isolated power-supply module for the modular GigaESC platform, intended for the 200 V version. Provides 12 V, 5 V and 3.3 V rails through a separate output connector.
70 parts - 4 layers82.5 × 82.5 mm

Core board
stellarcorp/tvsc
Core software repository for the Tennessee Valley Stellar Corporation
150 parts1MIT - 8 layers90 × 120.4 mm

Artix dc scm
antmicro/artix-dc-scm
Experimental Xilinx Artix-7 driven Data Center Security Communication Module
546 parts72Apache-2.0 - 8 layers90 × 120.4 mm

Ecp5-dc scm
antmicro/ecp5-dc-scm
Experimental Lattice ECP5-driven Data Center Security Communication Module
506 parts23Apache-2.0 - 4 layers57.2 × 179.7 mm

Optical
gustebeast/public-steel-guitar
A pedal steel guitar you can build yourself, from parts anyone can buy.
287 partsCERN-OHL-S-2.0
Questions
How big is the Blus mini mk2 PCB?
It measures 76.5 × 76.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Blus mini mk2 use?
168 parts, built around the STM32H723VGT6, USB3300-EZK-TR, TAS2780RYAR and TPS54302DDC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Blus mini mk2 KiCad files?
From the blus-audio/hardware repository on GitHub, at the commit this page was made from: the board is blus-mini-mk2/kicad/blus-mini-mk2.kicad_pcb and its schematic blus-mini-mk2/kicad/amplifiers.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Blus mini mk2 design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).