Skip to the content
33

USB3300-EZK-TR

Microchip TechnologyExtended

-40℃~+85℃ 3V~3.6V 480Mbps 54.7mA 83uA Transceiver USB 2.0 QFN-32-EP(5x5) USB Converters ROHS

Part id
microchip/USB3300-EZK-TR
Category
USB Converters
Package
QFN-32-EP(5x5)
Pins
32
In stock
14,555 at JLCPCB (C108383)
Used on
5 open-source boards

Overview

The USB3300-EZK-TR is a USB Converter made by Microchip Technology in a QFN-32-EP(5x5) package with 33 pins. -40℃~+85℃ 3V~3.6V 480Mbps 54.7mA 83uA Transceiver USB 2.0 QFN-32-EP(5x5) USB Converters ROHS.

PCBKit's library has its KiCad symbol (Interface_USB:USB3300-EZK, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm, from KiCad's library), ready for a KiCad board. 14,555 are in stock at JLCPCB (part C108383). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1GND2GND3CPEN4VBUS5ID6VDD3.37DP8DM9RESET10EXTVBUS11NXT12DIR13STP14CLKOUT15VDD1.816VDD3.317DATA718DATA619DATA520DATA421DATA322DATA223DATA124DATA025VDD3.326VDD1.827XO28XI29VDDA1.830VDD3.331REG_EN32RBIAS33GND
Interface_USB:USB3300-EZKFrom KiCad's library

Footprint

33
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mmFrom KiCad's library

From the datasheet

9
Supply, least
3 V · VDD3.3, recommended operating min · p. 11
Supply, most
3.6 V · VDD3.3, recommended operating max · p. 11
Supply, absolute maximum
4 V · VDD3.3, absolute maximum · p. 11
Supply, absolute maximum
2.5 V · VDD1.8 and VDDA1.8, absolute maximum · p. 11
Works from
-40 °C · Ambient temperature min · p. 11
Works up to
85 °C · Ambient temperature max · p. 11
Takes working
62.6 mA · sum of 3.3V and 1.8V HS receive currents, typical · p. 12
Takes at most
84.8 mA · sum of 3.3V and 1.8V FS transmit currents, max · p. 12
Takes asleep
84.9 µA · sum of 3.3V and 1.8V low power mode currents, typical; comparators and interface protection disabled · p. 12

What it is and has

5
USB interface
Hi-Speed USB host, device or OTG PHY with ULPI · p. 4
ULPI
12 pins: 8 bidirectional data, 3 control, 60 MHz clock · p. 4
Package
32 pin QFN, 5 x 5 x 0.9mm · p. 7
Internal regulators
Two 1.8V outputs, VDD1.8 and VDDA1.8 · p. 35
ESD protection
±8kV HBM on all pins · p. 43

Around it

10
res 12KΩ +/- 1%
between RBIAS and GND; External bias resistor. · p. 10
cap 0.1uF
between VDD3.3 (25) and GND; Bypass to PCB ground plane. · p. 9
cap 0.1uF
between VDD3.3 (30) and GND; Low ESR bypass to PCB ground plane recommended. · p. 9
cap 4.7uF +/-20%
between VDD1.8 and GND; Required for internal regulator stability; low ESR; X5R or X7R recommended; place near pin 26. · p. 35
cap 0.1uF
between VDDA1.8 and GND; Place near pin 29. · p. 9
crystal 24MHz
between XI and XO; An external 24MHz clock driven into XI can replace the crystal; float XO in that case. · p. 9
cap 0.01 or 0.1 F
between each VDD pin and GND; Additional decoupling at every VDD pin; approximately equal numbers of each value. · p. 39
cap 120F minimum
between USB connector VBUS and GND; Host mode; place near connector. · p. 39
cap 1–10F
between USB connector VBUS and GND; Device mode; place near connector. · p. 39
cap 1–6.5F
between USB connector VBUS and GND; OTG mode; place near connector. · p. 39

Specifications

53
ParameterConditionsAs printedPage
Maximum VBUS, ID, EXTVBUS, DP, and DM voltage to GND VMAX_5Vmin -0.5 · max 5.5 V11
Maximum VDD1.8 and VDDA1.8 voltage to Ground VMAX_1.8Vmin -0.5 · max 2.5 V11
Maximum 3.3V supply voltage to Ground VMAX_3.3Vmin -0.5 · max 4 V11
Maximum I/O voltage to Ground VMAX_INmin -0.5 · max 4 V11
Operating Temperature TMAX_OPmin -40 · max 85 C11
Storage Temperature TMAX_STGmin -55 · max 150 C11
All Pins VHBMESD PERFORMANCE; Human Body Model; minimum magnitude ±8 kVmin 8 kV11
All Pins ILTCH_UPLATCH-UP PERFORMANCE; EIA/JESD 78, Class IImin 150 mA11
VDD3.3 to GND VDD3.3min 3 · typ 3.3 · max 3.6 V11
Input Voltage on Digital Pins VIMaximum VDD3.3min 0 V11
Voltage on Analog I/O Pins (DP, DM, ID) VI(I/O)Maximum VDD3.3min 0 V11
VBUS to GND VVBUSmin 0 · max 5.2511
Ambient Temperature TAmin -40 · max 85 C11
FS Idle 3.3V Current IAVG(FS33)FS idle not data transfertyp 18.8 · max 21.9 mA12
FS Idle 1.8V Current IAVG(FS18)FS idle not data transfertyp 36.4 · max 43.2 mA12
FS Transmit 3.3V Current IAVG(FSTX33)FS current during data transmittyp 36 · max 41.6 mA12
FS Transmit 1.8V Current IAVG(FSTX18)FS current during data transmittyp 36.8 · max 43.2 mA12
FS Receive 3.3V Current IAVG(FSRX33)FS current during data receivetyp 22.5 · max 27 mA12
FS Receive 1.8V Current IAVG(FSRX18)FS current during data receivetyp 36.7 · max 43.4 mA12
HS Idle 3.3V Current IAVG(HS33)HS idle not data transfertyp 22.1 · max 25.4 mA12
HS Idle 1.8V Current IAVG(HS18)HS idle not data transfertyp 38.7 · max 45.6 mA12
HS Transmit 3.3V Current IAVG(HSTX33)HS current during data transmittyp 25.4 · max 29 mA12
HS Transmit 1.8V Current IAVG(HSTX18)HS current during data transmittyp 39.1 · max 46.2 mA12
HS Receive 3.3V Current IAVG(HSRX33)HS current during data receivetyp 23 · max 26.6 mA12
HS Receive 1.8V Current IAVG(HSRX18)HS current during data receivetyp 39.6 · max 46.8 mA12
Low Power Mode 3.3V Current IDD(LPM33)VBUS 15kΩ pull-down and 1.5kΩ pull-up resistor currents not included; SessEnd and VbusVld comparators disabled; interface protection disabledtyp 59.4 uA12
Low Power Mode 1.8V Current IDD(LPM18)VBUS 15kΩ pull-down and 1.5kΩ pull-up resistor currents not included; SessEnd and VbusVld comparators disabled; interface protection disabledtyp 25.5 uA12
Suspend Recovery Time TSTARTtyp 2.25 · max 3.5 ms12
Low-Level Input Voltage VILMinimum VSSmax 0.8 V12
High-Level Input Voltage VIHMaximum VDD3.3min 2 V12
Low-Level Output Voltage VOLIOL = 8mAmax 0.4 V12
Input Leakage Current ILIMaximum magnitude ±10 uAmax 10 uA12
Pin Capacitance Cpinmax 4 pF12
OFF-State Leakage Current ILZMaximum magnitude ±10 uAmax 10 uA14
Transceiver Input Capacitance CINPin to GNDtyp 5 · max 10 pF14
Rise Time TFSRFS Output Driver Timing; CL = 50pF; 10 to 90% of |VOH - VOL|min 4 · max 20 ns14
Fall Time TFFFFS Output Driver Timing; CL = 50pF; 10 to 90% of |VOH - VOL|min 4 · max 20 ns14
Output Signal Crossover Voltage VCRSExcluding the first transition from IDLE statemin 1.3 · max 2 V14
Differential Rise/Fall Time Matching FRFMExcluding the first transition from IDLE statemin 90 · max 111.1 %14
Differential Rise Time THSRHS Output Driver Timingmin 500 ps14
Differential Fall Time THSFHS Output Driver Timingmin 500 ps14
SessEnd trip point VSessEndmin 0.2 · typ 0.5 · max 0.8 V14
SessVld trip point VSessVldmin 0.8 · typ 1.4 · max 2 V14
VBUSVld trip point VVbusVldmin 4.4 · typ 4.58 · max 4.75 V14
Vbus Pull-Up RVbusPuVbus to VDD3.3 (ChargeVbus = 1)min 281 · typ 340 Ù14
Vbus Pull-down RVbusPdVbus to GND (DisChargeVbus = 1)min 656 · typ 850 Ù14
Vbus Impedance RVbusVbus to GNDmin 40 · typ 75 · max 100 kΩ14
ID pull-up resistance RIdPullUpIdPullup = 1min 80 · typ 100 · max 120 kΩ14
ID pull-up resistance RIdIdPullup = 0min 1 MΩ14
STP pull-up resistance RSTPInterfaceProtectDisable = 0min 240 · typ 330 · max 600 kΩ14
Hostmin 120 F39
Devicemin 1 · max 10 F39
OTGmin 1 · max 6.5 F39

Pins, by the datasheet

22
1 GND
Ground. · p. 7
2 GND
Ground. · p. 7
3 CPEN
Enables the external 5 volt Vbus power supply; low on POR. · p. 7
4 VBUS
USB cable VBUS; comparator inputs and Vbus pulsing during session request protocol. · p. 7
5 ID
USB cable ID; may float for non-OTG applications; 0 for A-device and 1 for B-device. · p. 7
17 DATA[7]
MSB of 8-bit data bus with pull-low; DIR determines ownership; transfers use rising CLKOUT edge. · p. 9
18 DATA[6]
8-bit data bus with pull-low; DIR determines ownership; transfers use rising CLKOUT edge. · p. 9
19 DATA[5]
8-bit data bus with pull-low; DIR determines ownership; transfers use rising CLKOUT edge. · p. 9
20 DATA[4]
8-bit data bus with pull-low; DIR determines ownership; transfers use rising CLKOUT edge. · p. 9
21 DATA[3]
8-bit data bus with pull-low; DIR determines ownership; transfers use rising CLKOUT edge. · p. 9
22 DATA[2]
8-bit data bus with pull-low; DIR determines ownership; transfers use rising CLKOUT edge. · p. 9
23 DATA[1]
8-bit data bus with pull-low; DIR determines ownership; transfers use rising CLKOUT edge. · p. 9
24 DATA[0]
LSB of 8-bit data bus with pull-low; DIR determines ownership; transfers use rising CLKOUT edge. · p. 9
25 VDD3.3
Connect a 0.1uF bypass capacitor to the PCB ground plane. · p. 9
26 VDD1.8
Digital 1.8V supplied by internal regulator when enabled; connect to pin 15 and bypass with 4.7uF low-ESR capacitor; externally supply when regulators are disabled. · p. 9
27 XO
Crystal pin; float when using an external clock on XI. · p. 9
28 XI
Connect a 24MHz crystal across XI and XO, or drive XI with an external 24MHz clock. · p. 9
29 VDDA1.8
Analog 1.8V supplied by internal regulator when enabled; bypass with 0.1uF and 4.7uF low-ESR capacitors; externally supply when regulators are disabled. · p. 9
30 VDD3.3
Analog 3.3 volt supply; 0.1uF low ESR bypass capacitor to PCB ground plane recommended. · p. 9
31 REG_EN
Internal regulator enable with pull-low; ground disables both regulators and requires external 1.8V supplies after VDD3.3 reaches at least 2.64V. · p. 10
32 RBIAS
Connect external 12KΩ +/- 1% bias resistor to ground. · p. 10
GND FLAG GND FLAG
Main IC ground; connect to ground plane with a via array under the exposed flag. · p. 10

Open-source boards using it

5
  • 8 layers90 × 120.4 mmArtix dc scm, the printed circuit board in 3D

    Artix dc scm

    antmicro/artix-dc-scm

    Experimental Xilinx Artix-7 driven Data Center Security Communication Module

    546 parts72Apache-2.0
  • 8 layers90 × 120.4 mmEcp5-dc scm, the printed circuit board in 3D

    Ecp5-dc scm

    antmicro/ecp5-dc-scm

    Experimental Lattice ECP5-driven Data Center Security Communication Module

    506 parts23Apache-2.0
  • 4 layers57.2 × 179.7 mmOptical, the printed circuit board in 3D

    Optical

    gustebeast/public-steel-guitar

    A pedal steel guitar you can build yourself, from parts anyone can buy.

    287 partsCERN-OHL-S-2.0
  • 4 layers22 × 60.5 mmStor, the printed circuit board in 3D

    Stor

    JBlitzar/stor

    A USB2.0 High Speed flash drive with a hotswappable MicroSD backend.

    65 partsGPL-3.0
  • 4 layers76.5 × 76.9 mmBlus mini mk2, the printed circuit board in 3D

    Blus mini mk2

    blus-audio/hardware

    Audio hardware

    168 parts1CERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the USB3300-EZK-TR?

Yes. The symbol is Interface_USB:USB3300-EZK and the footprint Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the USB3300-EZK-TR?

QFN-32-EP(5x5), with 33 pins. Its footprint is drawn on this page.

Where is the USB3300-EZK-TR datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the USB3300-EZK-TR?

JLCPCB lists it as part C108383, with 14,555 in stock; the sellers' links on this page open their listings.

What can replace the USB3300-EZK-TR?

Parts like it in the library: the USB3300-EZK by Microchip Technology, the CY7C65215-32LTXI by Infineon Technologies, the CY7C65213A-32LTXI by Infineon Technologies and the CY7C65213-32LTXI by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the USB3300-EZK-TR?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.