Skip to the content
PCBKitNew board
USB3300-EZK on a board, in 3D

USB3300-EZK

Microchip Technology

-40℃~+85℃ 3V~3.6V 54.7mA 83uA Controller USB 2.0 QFN-32-EP(5x5) USB Converters ROHS

Extended
DatasheetJLCPCBLCSCmicrochip/USB3300-EZK
Category
USB Converters
Package
QFN-32-EP(5x5)
Pins
32

Overview

The USB3300-EZK is a USB Converter made by Microchip Technology in a QFN-32-EP(5x5) package with 33 pins. -40℃~+85℃ 3V~3.6V 54.7mA 83uA Controller USB 2.0 QFN-32-EP(5x5) USB Converters ROHS.

PCBKit's library has its KiCad symbol (Interface_USB:USB3300-EZK, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm, from KiCad's library), ready for a KiCad board. 945 are in stock at JLCPCB (part C108954). 27 open-source boards in 25 repositories on GitHub use it.

Symbol

GND1GND2CPEN3VBUS4ID5VDD3.36DP7DM8RESET9EXTVBUS10NXT11DIR12STP13CLKOUT14VDD1.815VDD3.316DATA717DATA618DATA519DATA420DATA321DATA222DATA123DATA024VDD3.325VDD1.826XO27XI28VDDA1.829VDD3.330REG_EN31RBIAS32GND33
Interface_USB:USB3300-EZKFrom KiCad's library

Footprint

33
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mmFrom KiCad's library

Parameters

8
Applications Function
Controller
Current - Supply
54.7mA
Data Rate
480Mbps
Features
Built-in clock generator；Low-power mode
Operating Temperature
-40℃~+85℃
Quiescent Supply Current
83uA
USB Protocol
USB 2.0
Voltage - Supply
3V~3.6V

Order codes

1

Pinout

33
The pins of the USB3300-EZK
PinNameType
1GNDPower in
2GNDPower in
3CPENOutput
4VBUSPower in
5IDInput
6VDD3.3Power in
7DPInput/output
8DMInput/output
9RESETInput
10EXTVBUSInput
11NXTOutput
12DIROutput
13STPInput
14CLKOUTOutput
15VDD1.8Power out
16VDD3.3Power in
17DATA7Input/output
18DATA6Input/output
19DATA5Input/output
20DATA4Input/output
21DATA3Input/output
22DATA2Input/output
23DATA1Input/output
24DATA0Input/output
25VDD3.3Power in
26VDD1.8Power out
27XOOutput
28XIInput
29VDDA1.8Power out
30VDD3.3Power in
31REG_ENInput/output
32RBIASPassive
33GNDPower in

Open-source boards using it

All 27
  • 6 layers56 × 65 mmMainboard gen2, the printed circuit board in 3D

    Mainboard gen2

    zephray/NekoInk

    Next gen. of NekoCal: An open-source hackable and programmable e-paper display

    245 parts108
  • 4 layers88 × 23.4 mmSom, the printed circuit board in 3D

    Som

    Stanlazy/ZYNQ_Ruler

    Yet Another XC7Z010 Board

    225 parts18LGPL-2.1
  • 4 layers98.7 × 77.3 mmAkeypad, the printed circuit board in 3D

    Akeypad

    luantty2/akeypad

    8khz polling rate keypad, uses STM32F405 and USB3300, powered by QMK.

    69 parts13GPL-3.0
  • 4 layers45 × 75 mmYui, the printed circuit board in 3D

    Yui

    hasenbanck/yui

    YUI is a USB/SPDIF to I2S interface using a STM32 and a iCE40 FPGA

    77 parts10
  • 4 layers43 × 66 mmWookey, the printed circuit board in 3D

    Wookey

    wookey-project/hard-wookey-motherboard

    WooKey Secure Mass Storage Mainboard PCB

    90 parts10
  • 2 layersMcu, the printed circuit board in 3D

    Mcu

    trlsmax/stm32_ccd_camera

    A STM32 CCD camera

    92 parts4GPL-3.0
  • 4 layers310 × 123 mmVLT, the printed circuit board in 3D

    VLT

    Charading/VLT

    75% Keyboard

    426 parts3
  • 2 layers67.1 × 88.9 mmOspi, the printed circuit board in 3D

    Ospi

    tom01h/usb-ospi

    STM32H7を使ってUSB-HSをOCTO SPIに変換してPCとFPGAをUSBで通信する

    50 parts3

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/microchip/USB3300-EZK" title="USB3300-EZK in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/microchip/USB3300-EZK.jpg" alt="USB3300-EZK" width="1200" height="900">
A picture that opens the part, for a README
[![USB3300-EZK](https://pcbkit.io/embed/parts/microchip/USB3300-EZK.jpg?size=s)](https://pcbkit.io/parts/microchip/USB3300-EZK)

Questions

Is there a KiCad symbol and footprint for the USB3300-EZK?

Yes. The symbol is Interface_USB:USB3300-EZK and the footprint Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the USB3300-EZK?

QFN-32-EP(5x5), with 33 pins. Its footprint is drawn on this page.

Where is the USB3300-EZK datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the USB3300-EZK?

JLCPCB lists it as part C108954, with 945 in stock; the sellers' links on this page open their listings.

What can replace the USB3300-EZK?

Parts like it in the library: the USB3300-EZK-TR by Microchip Technology, the CY7C65215-32LTXI by Infineon Technologies, the CY7C65213A-32LTXI by Infineon Technologies and the CY7C65213-32LTXI by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the USB3300-EZK?

27 boards in 25 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8