4 layers80 × 49 mm
4 layers45 × 75 mm
YUI is a USB/SPDIF to I2S interface using a STM32 and a iCE40 FPGA
- Size
- 45 × 75 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 277
- Pads
- 581
- Tracks, vias
- 754, 289
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Jan 2019
- Updated
- 12 Jan 2019
Overview
Yui is an open-source printed circuit board by hasenbanck, from the hasenbanck/yui repository on GitHub. It is a 4-layer board of 45 × 75 mm with 77 parts on 277 nets, routed with 754 tracks and 289 vias.
It is built around the ICE40HX8K-BG121, PLR135/T9 and USB3300-EZK, with the KC3225K22.5792C10E00, KC3225K24.0000C1GE00 and KC3225K24.5760C10E00 among its other parts. Its parts include 46 capacitors, 10 resistors, 8 ICs, 6 connectors and 1 diode. It belongs with the fPGA and programmable logic boards and the STM32 and FPGA and CPLD boards of this library.
Main components
8
ICE40HX8K-BG121
CABGA-121-40℃~+100℃ 1.14V~1.26V 131072bit 7680 93 960 iCE40 HX CABGA-121 Programmable Logic Device (CPLDs/FPGAs) ROHSLatticeProgrammable Logic Device (CPLDs/FPGAs)
PLR135/T9
插件Fiber Optic Receiver Plugin Fiber Optical Transceivers ROHSEverlight ElectronicsFiber Optical Transceivers
USB3300-EZK
QFN-32-EP(5x5)-40℃~+85℃ 3V~3.6V 54.7mA 83uA Controller USB 2.0 QFN-32-EP(5x5) USB Converters ROHSMicrochip TechnologyUSB Converters
KC3225K22.5792C10E00
SMD3225-4P-10℃~+70℃ 1.6V~3.63V 22.5792MHz 3.5mA CMOS SMD3225-4P Crystal Oscillators ROHSKyocera AVXCrystal OscillatorsKC3225K24.0000C1GE00
SMD3225-4PCrystal OscillatorsKyocera AVXKC3225K24.5760C10E00
SMD3225-4PSMD3225-4P Crystal Oscillators ROHSKyocera AVXCrystal Oscillators
MIC5355-S4YMME
MSOP-8-EP-40℃~+125℃@(Tj) 1.2V、3.3V 146uVrms 2 350mV@(500mA) 5.5V 500mA 60dB@(1kHz) 70uA Fixed Over Current Protection、Enable、Thermal Shutdown Positive MSOP-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
NBA3N012CSN
SOT-23-5-40℃~+125℃ 0 1 3.3V 400Mbps LVDS、CML、LVPECL Receiver SOT-23-5 LVDS ICs ROHSonsemiLVDS ICs
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100nF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C13, C14, C15, C16, C17, C23, C24, C25, C37, C38, C39, C40, C43 +8 |
| 13 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C27, C28, C29, C30, C33, C34, C35, C36, C41, C42 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R5, R7, R8, R9 |
| 5 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C18, C19, C20, C21, C22 |
| 4 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1, C26, C31, C32 |
| 4 | MPZ1608S221A | Inductor_SMD:L_0603_1608Metric | FB1, FB2, FB3, FB4 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 2k2 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 300 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 47uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 67068-8000 | YUI:67068-8000 | J3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J5 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | Conn_Coaxial | YUI:CUI_RCJ-017 | J1 |
| 1 | ICE40HX8K-BG121 | Package_BGA:BGA-121_9.0x9.0mm_Layout11x11_P0.8mm_Ball0.4mm_Pad0.35mm_NSMD | U6 |
| 1 | KC3225K22.5792C10E00 | YUI:KC3225K | U7 |
| 1 | KC3225K24.0000C1GE00 | YUI:KC3225K | U4 |
| 1 | KC3225K24.5760C10E00 | YUI:KC3225K | U8 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Logo_Open_Hardware_Large | Symbol:OSHW-Logo2_9.8x8mm_SilkScreen | LOGO1 |
| 1 | MIC5355-S4YMME | Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP2.54x2.8mm_ThermalVias | U2 |
| 1 | NBA3N012C | Package_TO_SOT_SMD:TSOT-23-5 | U3 |
| 1 | PLR135/T9 | YUI:PLR135-T9 | J4 |
| 1 | STM32F765NIHx | Package_BGA:TFBGA-216_13x13mm_Layout15x15_P0.8mm | U1 |
| 1 | USB3300-EZK | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U5 |
Questions
How big is the Yui PCB?
It measures 45 × 75 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Yui use?
77 parts, built around the ICE40HX8K-BG121, PLR135/T9, USB3300-EZK and KC3225K22.5792C10E00. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Yui KiCad files?
From the hasenbanck/yui repository on GitHub, at the commit this page was made from: the board is PCB/yui.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Yui design in my own project?
Its repository states no licence, so its author keeps all rights: ask hasenbanck before reusing the design.
Similar boards
- 4 layers17.8 × 50.8 mm
- 4 layers67 × 157 mm
- 4 layers80 × 49 mm
- 4 layers76.2 × 63.5 mm
- 4 layers100 × 100 mm
- 4 layers29.7 × 29.7 mm
- 4 layers85 × 85 mm
