6 layers
Pc healthypi move sensor v9
Protocentral/healthypi-move-hw
Hardware files for the HealthyPi Move
124 parts160MIT
6 layers48.5 × 50 mm
USB Type C Switch
bluetiger9/USB-Type-C-Switch62:1 USB 3.x Type-C Switch
- Size
- 48.5 × 50 mm
- Copper layers
- 6
- Thickness
- 1.56 mm
- Parts
- 83
- Nets
- 112
- Pads
- 409
- Tracks, vias
- 1,764, 340
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Jan 2021
- Updated
- 10 Aug 2024
Overview
USB Type C Switch is an open-source printed circuit board by bluetiger9, from the bluetiger9/USB-Type-C-Switch repository on GitHub, published under the MIT licence. It is a 6-layer board of 48.5 × 50 mm with 83 parts on 112 nets, routed with 1,764 tracks and 340 vias.
It is built around the ATSAMD21E15B-MU, FUSB340TMX and AP63205WU, with the AP1606 and DG2788ADN-T1-GE4 among its other parts. Its parts include 31 resistors, 10 capacitors, 9 ICs, 9 diodes and 6 transistors. It belongs with the SAM D and SAM boards of this library.
Main components
5
ATSAMD21E15B-MU
QFN-32-40℃~+85℃ 1.62V~3.6V 26 32 Bit 32KB 48MHz 4KB ARM Cortex-M0+ Built-in FLASH QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
FUSB340TMX
X2-QFN-18-40℃~+85℃ 1.5V~5V 10Gbps 2 USB 3.1、DP 1.3 X2-QFN-18 USB Converters ROHSonsemiUSB Converters
AP63205WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.8V~32V 5V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
AP1606
DFN-3L(0.6x1)-50℃~+150℃ 1 N-channel 1.1nC@4.5V 1.2V 15pF 20V 260mΩ@4.5V 40pF 550mW 6.5pF 700mA N-Channel DFN-3L(0.6x1) MOSFETs ROHSALLPOWERMOSFETs
DG2788ADN-T1-GE4
UQFN-16(1.8x2.6)-40℃~+85℃ 1.8V~5.5V 100ps 26pF 30us 338MHz 350ns 370mΩ 4 4:1 UQFN-16(1.8x2.6) Analog Switches, Multiplexers ROHSVishay IntertechnologyAnalog Switches, Multiplexers
README
README.mdUSB 3.x Type-C Switch
Design idea: https://www.element14.com/community/message/298495/l/usb-3x-type-c-switch-kvm-type-design-review#298495
Features
The device will have the following features:
- two USB 3.x Type-C Input ports
- one USB 3.x Type-C Output port
- switching of all four USB 3.x SuperSpeed differential pairs
- switching of the USB 2.x HighSpeed differential pair
- switching of the Configuration (CC) and Sideband use (SBU) channels
- USB Power Delivery pass-through up to the full power range 20V @ 5A
- reasonable cost
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 220k | Resistor_SMD:R_0402_1005Metric | R7, R8, R20, R21, R27, R28 |
| 6 | 5.1k | Resistor_SMD:R_0402_1005Metric | R11, R12, R22, R24, R25, R26 |
| 6 | AP1606 | Package_DFN_QFN:Diodes_DFN1006-3 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 470 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R9, R10 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C5, C6, C9 |
| 4 | 47u | Capacitor_SMD:C_1206_3216Metric | C2, C3, C8, C10 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R5, R6 |
| 3 | 220k | Resistor_SMD:R_0603_1608Metric | R29, R30, R31 |
| 3 | 3.6V | Diode_SMD:D_SOD-523 | D7, D8, D9 |
| 3 | 47k | Resistor_SMD:R_0603_1608Metric | R13, R15, R17 |
| 3 | 5.6k | Resistor_SMD:R_0603_1608Metric | R14, R16, R18 |
| 3 | 5A | Fuse:Fuse_0603_1608Metric | F1, F2, F3 |
| 3 | D_Schottky_Small | Diode_SMD:D_SOD-323 | D1, D2, D3 |
| 3 | LED_Small | LED_SMD:LED_0805_2012Metric | D4, D5, D6 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C4, C7 |
| 2 | FUSB340TMX | custom:QFN40P200X280X40-19N | U1, U2 |
| 2 | NL3S588 | custom:NL3S588MUTBG | U3, U7 |
| 2 | UCS3205-E_Q8A | custom:UCS3205-E&slash_Q8A | U5, U6 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 4.7uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | AP63205WU | Package_TO_SOT_SMD:TSOT-23-6 | U4 |
| 1 | ATSAMD21E15B-M | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm | U9 |
| 1 | AZ1117C-3.3 | Package_TO_SOT_SMD:SOT-89-3 | U8 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J4 |
| 1 | DG2788ADN-T1-GE4 | custom:QFN40P180X260X60-16N-D | S1 |
| 1 | KiCad-Logo2_5mm_SilkScreen | Symbol:KiCad-Logo2_5mm_SilkScreen | REF_KICAD_LOGO |
| 1 | OSHW-Logo2_9.8x8mm_SilkScreen | Symbol:OSHW-Logo2_9.8x8mm_SilkScreen | REF_OSH_LOGO_2 |
| 1 | OSHW-Logo_5.7x6mm_SilkScreen | Symbol:OSHW-Logo_5.7x6mm_SilkScreen | REF_OSH_LOGO_1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB_C_IN_1 | custom:CUI_UJ31-CH-31-SMT-TR | J1 |
| 1 | USB_C_IN_2 | custom:CUI_UJ31-CH-31-SMT-TR | J2 |
| 1 | USB_C_OUT | custom:CUI_UJ31-CH-31-SMT-TR | J3 |
| 1 | pwr_erc_ignore | NetTie:NetTie-2_SMD_Pad2.0mm | NT1 |
Questions
How big is the USB Type C Switch PCB?
It measures 48.5 × 50 mm and has 6 copper layers, 1.56 mm thick.
What parts does the USB Type C Switch use?
83 parts, built around the ATSAMD21E15B-MU, FUSB340TMX, AP63205WU and AP1606. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB Type C Switch KiCad files?
From the bluetiger9/USB-Type-C-Switch repository on GitHub, at the commit this page was made from: the board is KiCad/USB-TypeC-Switch.kicad_pcb and its schematic KiCad/USB-TypeC-Switch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB Type C Switch design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers41.3 × 31.8 mm
Smd challenge
mokomull/smd-challenge
SMD circuit board with 1206, 0805, 0603, 0402 and 0201 LEDs
26 parts1 - 4 layers99 × 139 mm
RCU
GhanGhan/SurvBot
Remote controlled robot that surveys the environment it is travelling in
148 parts - 2 layers44.3 × 48.8 mm
- 6 layers25.4 × 50.8 mm
- 6 layers91.8 × 139.8 mm
- 6 layers81.5 × 50 mm
Picard
weiiwang01/picard
PiCard is a miniaturized Raspberry Pi Compute Module carrier board optimized for Linux server use cases.
166 parts8 - 4 layers118.7 × 72.5 mm
Framework ExpansionBay IO Module
XPModder/Framework-ExpansionBay
Some stuff I made for the Framework Laptop 16 Expansion Bay
90 parts3