FUSB340TMX

onsemi

-40℃~+85℃ 1.5V~5V 10Gbps 2 USB 3.1、DP 1.3 X2-QFN-18 USB Converters ROHS

Extended

Datasheetonsemi/FUSB340TMX

Category: USB Converters
Package: X2-QFN-18
Pins: 19

Overview

The FUSB340TMX is a USB Converter made by onsemi in a X2-QFN-18 package with 19 pins. -40℃~+85℃ 1.5V~5V 10Gbps 2 USB 3.1、DP 1.3 X2-QFN-18 USB Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:FUSB340TMX, from EasyEDA) and its footprint (EasyEDA_Cloud:TMLP-18_L2.8-W2.0-P0.40-BL-EP, from EasyEDA), ready for a KiCad board. 6,312 are in stock at JLCPCB (part C478457). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

EasyEDA_Cloud:FUSB340TMXFrom EasyEDA

Footprint

EasyEDA_Cloud:TMLP-18_L2.8-W2.0-P0.40-BL-EPFrom EasyEDA

From the datasheet

Supply, least: 1.5 V · VDD, recommended operating min · p. 4
Supply, most: 5 V · VDD, recommended operating max · p. 4
Supply, absolute maximum: 6 V · VDD, absolute max · p. 4
Works from: -40 °C · Operating ambient temperature min · p. 4
Works up to: 85 °C · Operating ambient temperature max · p. 4
Takes working: 12 mA · VDD, typical quiescent current, switches enabled, VDD = 5.0 V, IOUT = 0 · p. 5
Takes at most: 30 mA · VDD, max quiescent current, switches enabled, VDD = 5.0 V, IOUT = 0 · p. 5
Takes asleep: 1 mA · VDD, max high impedance quiescent current, VDD = 5.0 V · p. 5
Data rate, most: 10 Gbit/s · USB 3.1 SuperSpeed Gen 2, max data rate · p. 1

What it is and has

Bandwidth: 10 GHz typical · p. 1
USB switch: USB 3.1 SuperSpeed, 5 Gbps and 10 Gbps · p. 1
Insertion loss: −1.0 dB typical at 2.5 GHz · p. 1
ESD protection: 2 kV HBM · p. 1
Package: 18 Lead TMLP · p. 1
Pb−Free: Yes · p. 1
Supported protocol: PCI Express, Gen 3 · p. 1
Supported protocol: SATA · p. 1
Supported protocol: Fibre Channel · p. 1
Supported protocol: Display Port 1.3 · p. 1

Specifications

Parameter	Conditions	As printed	Page
Supply Voltage VDD		min -0.5 · max 6 V	4
DC Input Voltage (S, OE) (Note 1) VCNTRL		min -0.5 V	4
DC Switch I/O Voltage (Notes 1, 2) VSW		min -0.3 · max 2.1 V	4
DC Input Diode Current IIK		min -50 mA	4
DC Switch Current Isw		max 25 mA	4
Storage Temperature TSTG		min -65 · max 150 °C	4
Moisture Sensitivity Level (JEDEC J−STD−020A) MSL		max 1	4
Human Body Model, JEDEC: JESD22−A114 ESD	All Pins	min 2 kV	4
IEC 61000−2−4, Level 4, for Switch Pins ESD	Contact	min 8 kV	4
IEC 61000−2−4, Level 4, for Switch Pins ESD	Air	min 15 kV	4
Charged Device Model, JESD22−C101 ESD		min 1 kV	4
Supply Voltage VDD		min 1.5 · max 5 V	4
Power Supply Slew Rate tRAMP(VDD)		min 100 · max 1000 ms/V	4
Control Input Voltage (S, OE) (Note 3) VCNTRL		min 0 · max 5 V	4
Switch I/O Voltage (Both SSUSB Switch Paths) VSW		min 0 · max 2 V	4
Operating Temperature TA		min -40 · max 85 °C	4
Clamp Diode Voltage S, OE VIK	IIN = −18 mA; VDD = 1.5 V	min -1.2 · max -0.6 V	4
Clamp Diode Current (Switch Pins) IIK	VIN = −0.3 V; VDD = 0 V	max 18 mA	4
Control Input Voltage High VIH	S, OE; VDD = 1.5 V	min 1.3 V	4
Control Input Voltage High VIH	S, OE; VDD = 3.6 V	min 1.4 V	4
Control Input Voltage High VIH	S, OE; VDD = 5.0 V	min 1.5 V	4
Control Input Voltage Low VIL	S, OE; VDD = 1.5 V	max 0.4 V	4
Control Input Voltage Low VIL	S, OE; VDD = 3.6 V	max 0.4 V	4
Control Input Voltage Low VIL	S, OE; VDD = 5.0 V	max 0.4 V	4
Control Input Leakage IIN	VSW = −0.6 to 2.0 V, VCNTRL = 0 to VDD; VDD = 5.0 V	min -500 · max 500 nA	4
Off−State Leakage for Open Data Paths IOZ	VSW = 0.0 ≤ DATA ≤ 2.0 V; VDD = 5.0 V	min -0.5 · max 0.5 mA	4
On−State Leakage for Closed Data Paths (Note 4) ICL	VSW = 0.0 ≤ DATA ≤ 2.0 V; VDD = 5.0 V; data switch closed with respective switch pin floating	min -0.5 · max 0.5 mA	4
Power−Off Leakage Current (All I/O Ports) IOFF	VSW = 0 V or 2.0 V; VDD = 0 V	min -500 · max 500 nA	4
Switch On Resistance RON	VSW = 0 V, ION = −8 mA; VDD = 1.5 V	typ 5.4 · max 8 W	5
Difference in RON Between Positive−Negative DRON	VSW = 0 V, ION = −8 mA; VDD = 1.5 V	typ 0.1 W	5
Flatness for RON RONF	VSW = 0 ≤ DATA ≤ 2.0 V, ION =−8 mA; VDD = 1.5 V	typ 0.9 W	5
Quiescent Supply Current ICC	VOE = 0, VSEL = 0 or VDD, IOUT = 0; VDD = 5.0 V	typ 12 · max 30 mA	5
Quiescent Supply Current (High Impedance) ICCZ	VSEL = X, VOE = VDD, IOUT = 0; VDD = 5.0 V	max 1 mA	5
Increase in Quiescent Supply Current per VCNTRL ICCT	VSEL or VOE = 1.5 V; VDD = 5.0 V	typ 5 · max 15 mA	5
Turn−On Time, S to Output tON	RL = 50 W, CL = 0 pF, VSW = 0 V, VSW = 0.6 V; VDD = 1.5 to 5.0 V	typ 350 · max 600 ns	5
Turn−Off Time, S to Output tOFF	RL = 50 W, CL = 0 pF, VSW = 0 V, VSW = 0.6 V; VDD = 1.5 to 5.0 V	typ 125 · max 300 ns	5
Enable Time, OE to Output tZHM,ZL	RL = 50 W, CL = 0 pF, VSW = 0.6 V; VDD = 1.5 to 5.0 V	typ 60 · max 150 us	5
Disable Time, OE to Output tLZM,HZ	RL = 50 W, CL = 0 pF, VSW = 0.6 V; VDD = 1.5 to 5.0 V	typ 35 · max 240 ns	5
Propagation Delay (Note 5) tPD	CL = 0 pF, RL = 50 W; VDD = 1.5 to 5.0 V	typ 60 ps	5
Break−Before−Make (Note 5) tBBM	RL = 50 W, CL = 0 pF, VSW1 = 0.6 V, VSW2 = −0.6 V; VDD = 1.5 to 5.0 V	min 100 · max 350 ns	5
Differential Off Isolation (Note 5) DOIRR	VS = 0dBm, RL = 50 W, f = 2.5 GHz; VDD = 3.6 V	typ -28 dB	5
Differential Off Isolation (Note 5) DOIRR	VS = 0 dBm, RL = 50 W, f = 5.0 GHz; VDD = 3.6 V	typ -25 dB	5
Differential Channel Crosstalk (Note 5) SDDNEXT	VS = 0 dBm, R = 50 W, f = 2.5 GHz; VDD = 3.6 V	typ -44 dB	5
Differential Channel Crosstalk (Note 5) SDDNEXT	VS = 0 dBm, R = 50 W, f = 5.0 GHz; VDD = 3.6 V	typ -40 dB	5
Differential Insertion Loss (Note 5) (All Data Paths) DIL	VIN = 0dBm, f = 2.5 GHz, RL = 50 W, CL = 0 pF; VDD = 3.6 V	typ -1 dB	5
Differential Insertion Loss (Note 5) (All Data Paths) DIL	VIN = 0 dBm, f = 5.0 GHz, RL = 50 W, CL = 0 pF; VDD = 3.6 V	typ -1.8 dB	5
Differential, −3 dB Bandwidth (Note 5) BW	VIN = 1 Vpk−pk, RL = 50 W, CL = 0 pF (Both Data Paths); VDD = 3.6 V	typ 10 GHz	5
Skew of Opposite Transitions of the Same Output (Note 5) tSK(P)	RPU = 50 W to VDD, CL = 0 pF; VDD = 3.6 V	typ 6 ps	5
Control Pin Input Capacitance (Note 5) CIN	VDD = 0 V, f = 1 MHz	typ 2.7 pF	5
On Capacitance (Note 5) CON	VDD = 3.3 V, f = 2.5 GHz	typ 0.5 pF	5
Off Capacitance (Note 5) COFF	VDD = 3.3 V, f = 2.5 GHz	typ 0.4 pF	5

Pins, by the datasheet

1 SSTXCOM−: SuperSpeed TX− Common · p. 3
2 SSTXCOM+: SuperSpeed TX+ Common · p. 3
3 GND: Ground, connected to die attach pad. · p. 3
4 SSRXCOM−: SuperSpeed RX− Common · p. 3
5 SSRXCOM+: SuperSpeed RX+ Common · p. 3
6 S: Switch Select: 0 = SW1, 1 = SW2. · p. 3
7 OE: Output Enable: 0 = Switches Enabled, 1 = Switches Disabled. · p. 3
8 SSRX2+: SuperSpeed RX2+ · p. 3
9 SSRX2−: SuperSpeed RX2− · p. 3
10 SSRX1+: SuperSpeed RX1+ · p. 3
11 SSRX1−: SuperSpeed RX1− · p. 3
12 GND: Ground, connected to die attach pad. · p. 3
13 SSTX2+: SuperSpeed TX2+ · p. 3
14 SSTX2−: SuperSpeed TX2− · p. 3
15 SSTX1+: SuperSpeed TX1+ · p. 3
16 SSTX1−: SuperSpeed TX1− · p. 3
17 VDD: Device Power · p. 3
18 GND: Ground · p. 3

Ordering codes, by the datasheet

FUSB340TMX: 18−Lead, Quad, Ultra−ultrathin Molded Leadless Package (TMLP), 2.0 mm × 2.8 mm × 0.375 mm · −40 to +85°C operating temperature; 5,000 / Tape & Reel · p. 6

Parameters

Current - Supply: 12mA
Current - Supply(Max): 30mA
Data Rate: 10000Mbps
Features: Low-power mode；Shutdown mode
Number of Channels: 2
Operating Temperature: -40℃~+85℃
Quiescent Supply Current: 1uA
Standby Current: 1mA
USB Protocol: DP 1.3
Voltage - Supply: 1.5V~5V
Voltage - Supply(Absolute Max): 6V

Order codes

FUSB340TMXLCSC C478457

Pinout

The pins of the FUSB340TMX
Pin	Name	Type
1	SSTXCOM-	Unspecified
2	SSTXCOM+	Unspecified
3	GND	Unspecified
4	SSRXCOM-	Unspecified
5	SSRXCOM+	Unspecified
6	S	Unspecified
7	OE#	Unspecified
8	SSRX2+	Unspecified
9	SSRX2-	Unspecified
10	SSRX1+	Unspecified
11	SSRX1-	Unspecified
12	GND	Unspecified
13	SSTX2+	Unspecified
14	SSTX2-	Unspecified
15	SSTX1+	Unspecified
16	SSTX1-	Unspecified
17	VDD	Unspecified
18	GND	Unspecified
19	GND	Unspecified

Open-source boards using it

All 5

6 layers25.4 × 50.8 mm
ReDIP-64
daglem/reDIP-64
Commodore 64 FPGA emulation platform
150 parts20
6 layers91.8 × 139.8 mm
TRX055.01.01.PB.00.00
acruxcz/TRNXSDR-carrier
SDR Kit base board
703 parts17
6 layers81.5 × 50 mm
Picard
weiiwang01/picard
PiCard is a miniaturized Raspberry Pi Compute Module carrier board optimized for Linux server use cases.
166 parts8
6 layers48.5 × 50 mm
USB Type C Switch
bluetiger9/USB-Type-C-Switch
2:1 USB 3.x Type-C Switch
83 parts6MIT
4 layers118.7 × 72.5 mm
Framework ExpansionBay IO Module
XPModder/Framework-ExpansionBay
Some stuff I made for the Framework Laptop 16 Expansion Bay
90 parts3

Show this part on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/parts/onsemi/FUSB340TMX" title="FUSB340TMX in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/parts/onsemi/FUSB340TMX.jpg" alt="FUSB340TMX" width="1200" height="900">

A picture that opens the part, for a README

[![FUSB340TMX](https://pcbkit.io/embed/parts/onsemi/FUSB340TMX.jpg?size=s)](https://pcbkit.io/parts/onsemi/FUSB340TMX)

Questions

Is there a KiCad symbol and footprint for the FUSB340TMX?

Yes. The symbol is EasyEDA_Cloud:FUSB340TMX and the footprint EasyEDA_Cloud:TMLP-18_L2.8-W2.0-P0.40-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the FUSB340TMX?

X2-QFN-18, with 19 pins. Its footprint is drawn on this page.

Where is the FUSB340TMX datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the FUSB340TMX?

JLCPCB lists it as part C478457, with 6,312 in stock; the sellers' links on this page open their listings.

Which open-source boards use the FUSB340TMX?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.