Skip to the content
2 layers68.2 × 44.6 mmPower board, the printed circuit board in 3D
Size
68.2 × 44.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
10
Pads
66
Tracks, vias
95, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
13 Jun 2019
Updated
27 Jun 2019

Overview

Power board is an open-source printed circuit board by blthree, from the blthree/synth_schematics repository on GitHub. It is a 2-layer board of 68.2 × 44.6 mm with 25 parts on 10 nets, routed with 95 tracks and 0 vias.

It is built around the LTC1044CD. Its parts include 12 connectors, 5 capacitors, 2 ICs and 1 diode.

Main components

1

README

README.md

View this project on CADLAB.io.

synth_schematics

Parts

25
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_ISO14580_PadH1, H2, H3, H4
3100uFCapacitor_THT:CP_Radial_D7.5mm_P2.50mmC3, C4, C5
210uFCapacitor_THT:CP_Radial_D7.5mm_P2.50mmC1, C2
1D_ALTDiode_THT:D_DO-41_SOD81_P7.62mm_HorizontalD1
1Jack-DCConnector_BarrelJack:BarrelJack_CUI_PJ-102AH_HorizontalJ3
1LM7812_TO220Package_TO_SOT_THT:TO-220-3_Horizontal_TabDownU2
1LTC1044Package_DIP:DIP-8_W7.62mm_SocketU1
1LinReg BypassJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1
1Power1Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1Power10Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ11
1Power11Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ10
1Power2Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1Power3Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ6
1Power4Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ8
1Power5Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2
1Power6Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ5
1Power7Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ7
1Power8Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ9
1PowerInConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ12

More from blthree/synth_schematics

12
  • 2 layers98.3 × 82.3 mmCem3340-module, the printed circuit board in 3D

    Cem3340-module

    blthree/synth_schematics

    84 parts
  • 2 layersVco4069, the printed circuit board in 3D

    Vco4069

    blthree/synth_schematics

    84 parts
  • 2 layers99.4 × 78 mmBackup r1, the printed circuit board in 3D

    Backup r1

    blthree/synth_schematics

    66 parts
  • 2 layers96.8 × 81.5 mmNoname, the printed circuit board in 3D

    Noname

    blthree/synth_schematics

    63 parts
  • 2 layers39.6 × 99.1 mmLfo, the printed circuit board in 3D

    Lfo

    blthree/synth_schematics

    52 parts
  • 2 layers79.4 × 45.6 mmVco3, the printed circuit board in 3D

    Vco3

    blthree/synth_schematics

    46 parts
  • 2 layers68.6 × 77.5 mmVcf, the printed circuit board in 3D

    Vcf

    blthree/synth_schematics

    45 parts
  • 2 layers59.5 × 48.8 mmNoname, the printed circuit board in 3D

    Noname

    blthree/synth_schematics

    41 parts
  • 2 layers29.8 × 99.7 mmDelay, the printed circuit board in 3D

    Delay

    blthree/synth_schematics

    39 parts

Similar boards

  • 2 layers58 × 100 mmFullBoardChargePumpCapMult, the printed circuit board in 3D

    FullBoardChargePumpCapMult

    z2amiller/pedalfx

    Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:

    40 parts7
  • 2 layers100 × 100 mmHF PA Radio Interface, the printed circuit board in 3D

    HF PA Radio Interface

    RADARC/Modular-PA-Controller

    Controller for High Power RF Power Amplifiers based Raspberry Pi Pico

    187 parts
  • 2 layers160 × 99 mmTCC Circuito, the printed circuit board in 3D

    TCC Circuito

    v206645/Dados-Utilizados-TCC-Sonda-Hall-SOI

    56 parts
  • 2 layersSENS CO analog frontend, the printed circuit board in 3D

    SENS CO analog frontend

    souhaib250/SENS-CO-Wearable-Gas-Sensor

    Design, simulation and PCB implementation of an embedded wireless acquisition node for a wearable WS2 gas sensor.

    6 parts
  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0
  • 2 layers113.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    25 parts2.1k
  • 2 layers58.4 × 114.3 mmPicoPedal, the printed circuit board in 3D

    PicoPedal

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    25 parts915

Questions

How big is the Power board PCB?

It measures 68.2 × 44.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Power board use?

25 parts, built around the LTC1044CD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Power board KiCad files?

From the blthree/synth_schematics repository on GitHub, at the commit this page was made from: the board is power_board/power_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Power board design in my own project?

Its repository states no licence, so its author keeps all rights: ask blthree before reusing the design.