
Remote pcb
MaximTrofimov/STM32-RC-Car
Designed two custom PCBs (remote and car) for a wirelessly-controlled RC car. Implemented wireless communication between two STM32 microcontrollers using embedded firmware.

breakout board for using nrf24l01 with breadboard
Nrf24l01 bob is an open-source printed circuit board by blreams, from the blreams/nrf24l01_bob repository on GitHub. It is a 2-layer board of 30.5 × 48.3 mm with 15 parts on 14 nets, routed with 112 tracks and 4 vias.
It is built around the NRF24L01 and AP2112K-3.3. Its parts include 6 connectors, 5 capacitors, 2 ICs, 1 resistor and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C5 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J10 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_5x3.9 | C3 |
| 1 | 270 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J8 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J12 |
| 1 | GREEN | LED_THT:LED_D3.0mm | D1 |
| 1 | NRF24L01 | RF_Module:nRF24L01_Breakout | U1 |

MaximTrofimov/STM32-RC-Car
Designed two custom PCBs (remote and car) for a wirelessly-controlled RC car. Implemented wireless communication between two STM32 microcontrollers using embedded firmware.

NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover

DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system

CGrassin/biosignals
Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).

microdynamics-robot-quadcopter/breeze_electronics_design
This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.



It measures 30.5 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the NRF24L01 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the blreams/nrf24l01_bob repository on GitHub, at the commit this page was made from: the board is kicad/nrf24l01_bob/nrf24l01_bob.kicad_pcb and its schematic kicad/nrf24l01_bob/nrf24l01_bob.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask blreams before reusing the design.