Skip to the content
2 layers27.9 × 37.3 mmCs43l22 breakout, the printed circuit board in 3D

Cs43l22 breakout

blakesmith/embedded167

Blake's embedded projects

Size
27.9 × 37.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
46
Nets
36
Pads
130
Tracks, vias
296, 31
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
16 Feb 2019
Updated
13 Jun 2023

Overview

Cs43l22 breakout is an open-source printed circuit board by blakesmith, from the blakesmith/embedded repository on GitHub. It is a 2-layer board of 27.9 × 37.3 mm with 46 parts on 36 nets, routed with 296 tracks and 31 vias.

It is built around the LM1117-1.8. Its parts include 17 capacitors, 4 resistors, 2 ICs and 1 connector. It belongs with the interfaces and adapters boards of this library.

Main components

1

Parts

46
QtyValueFootprintReferences
70.1ufCapacitors_SMD:C_0805_HandSolderingC1, C4, C5, C6, C7, C11, C12
41ufCapacitors_SMD:C_0805_HandSolderingC2, C3, C10, C16
20.022ufCapacitors_SMD:C_0805_HandSolderingC8, C9
210kResistors_SMD:R_0805_HandSolderingR1, R2
210ufCapacitors_SMD:C_0805_HandSolderingC14, C17
2150pfCapacitors_SMD:C_0805_HandSolderingC13, C15
251.1Resistors_SMD:R_0805_HandSolderingR3, R4
2GNDconnector:Conn_1pin_2.54mmGND, GND
1+5Vconnector:Conn_1pin_2.54mmVcc
1AIN1Aconnector:Conn_1pin_2.54mmAIN1A
1AIN1Bconnector:Conn_1pin_2.54mmAIN1B
1AIN2Aconnector:Conn_1pin_2.54mmAIN2A
1AIN2Bconnector:Conn_1pin_2.54mmAIN2B
1AIN3Aconnector:Conn_1pin_2.54mmAIN3A
1AIN3Bconnector:Conn_1pin_2.54mmAIN3B
1AIN4Aconnector:Conn_1pin_2.54mmAIN4A
1AIN4Bconnector:Conn_1pin_2.54mmAIN4B
1CS43L22_V2Housings_DFN_QFN:QFN-40-1EP_6x6mm_Pitch0.5mmU1
1LM1117-1.8TO_SOT_Packages_SMD:SOT-223U2
1LRCKconnector:Conn_1pin_2.54mmLRCK
1MCLKconnector:Conn_1pin_2.54mmMCLK
1SCLconnector:Conn_1pin_2.54mmSCL
1SCLKconnector:Conn_1pin_2.54mmSCLK
1SDAconnector:Conn_1pin_2.54mmSDA
1SDINconnector:Conn_1pin_2.54mmSDIN
1SJ-3524audio:SJ-3524-SMT_Stereo_JackJ20
1SPKR_OUTA+connector:Conn_1pin_2.54mmSPKR_OUTA+
1SPKR_OUTA-connector:Conn_1pin_2.54mmSPKR_OUTA-
1SPKR_OUTB+connector:Conn_1pin_2.54mmSPKR_OUTB+
1SPKR_OUTB-connector:Conn_1pin_2.54mmSPKR_OUTB-
1~RESETconnector:Conn_1pin_2.54mm~RESET

More from blakesmith/embedded

9
  • 2 layers275 × 103 mmKeebee, the printed circuit board in 3D

    Keebee

    blakesmith/embedded

    Blake's embedded projects

    159 parts167
  • 2 layers22.9 × 81.3 mmStm32f411 breakout, the printed circuit board in 3D

    Stm32f411 breakout

    blakesmith/embedded

    Blake's embedded projects

    66 parts167
  • 2 layers91.4 × 91.4 mmNome, the printed circuit board in 3D

    Nome

    blakesmith/embedded

    Blake's embedded projects

    64 parts167
  • 2 layers31 × 38 mmEmbedded, the printed circuit board in 3D

    Embedded

    blakesmith/embedded

    Blake's embedded projects

    49 parts167
  • 2 layers45.7 × 58.4 mmClock, the printed circuit board in 3D

    Clock

    blakesmith/embedded

    Blake's embedded projects

    26 parts167
  • 2 layers61 × 21.6 mmOxidized flash, the printed circuit board in 3D

    Oxidized flash

    blakesmith/embedded

    Blake's embedded projects

    20 parts167
  • 2 layers43.2 × 45.7 mmStm32l151 breakout, the printed circuit board in 3D

    Stm32l151 breakout

    blakesmith/embedded

    Blake's embedded projects

    15 parts167

Similar boards

  • 2 layers52.5 × 36.6 mmESP8266-WebRadio, the printed circuit board in 3D

    ESP8266-WebRadio

    karawin/Ka-Radio

    A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix

    52 parts453
  • 2 layers105 × 38.5 mmHackTM, the printed circuit board in 3D

    HackTM

    agweimar/hackTM

    Github repository for HackTM 2018

    28 parts5GPL-3.0
  • 2 layers76.2 × 50.8 mmCuterunner-32-64, the printed circuit board in 3D

    Cuterunner-32-64

    ArcaneNibble/cuterunner

    CoolRunner-II Dev Board

    49 parts40BSD
  • 2 layers90 × 60 mmSabvoton controller, the printed circuit board in 3D

    Sabvoton controller

    dkomeza/sabvoton-controller

    A controller for the sabvoton ebike esc.

    72 parts3
  • 4 layers72 × 46.5 mmAssoc board, the printed circuit board in 3D

    Assoc board

    leoheck/assoc-board

    Evaluation board for the ASSoC IC

    48 parts3
  • 2 layers75 × 20 mmSpimux, the printed circuit board in 3D

    Spimux

    oxidecomputer/hw-spimux

    PMOD Quad SPI flash mux debug board

    23 parts2MPL-2.0
  • 2 layers93.3 × 97.2 mmUnderwater, the printed circuit board in 3D

    Underwater

    lets-make-something/underwater-drone

    73 parts

Questions

How big is the Cs43l22 breakout PCB?

It measures 27.9 × 37.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Cs43l22 breakout use?

46 parts, built around the LM1117-1.8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cs43l22 breakout KiCad files?

From the blakesmith/embedded repository on GitHub, at the commit this page was made from: the board is hardware/breakout_boards/cs43l22_breakout/cs43l22_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cs43l22 breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask blakesmith before reusing the design.