4 layers27.9 × 63.5 mm
Pico2-ice
tinyvision-ai-inc/pico2-ice
Doc | Hardware | SDK | Schematic | Assembly | Discord
124 parts60MIT
6 layers61 × 101 mm
BonanzaDisplay
bitaxeorg/bonanzaDisplayDisplay PCB for the bitaxeBonanza
- Size
- 61 × 101 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 76
- Pads
- 285
- Tracks, vias
- 427, 133
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 5 May 2026
- Updated
- 20 Oct 2026
Overview
BonanzaDisplay is an open-source printed circuit board by bitaxeorg, from the bitaxeorg/bonanzaDisplay repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 6-layer board of 61 × 101 mm with 81 parts on 76 nets, routed with 427 tracks and 133 vias.
It is built around the RP2354A, XC6206P282MR and XC6206P302MR, with the RC0402FR-0710KL, TS-1088-AR02016 and MLP2016H3R3MT0S1 among its other parts. Its parts include 29 capacitors, 13 resistors, 5 connectors, 4 ICs and 3 switches. It belongs with the RP2350 boards of this library.
Main components
8
RP2354A
QFN-60(7x7)150MHz 32 Bit ARM Cortex-M33 Built-in+External Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Built-in general-purpose timer、Integrated LDO、Calendar function、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG) QFN-60(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
XC6206P282MR
SOT-23-3L-40℃~+85℃ 1 150mV@(100mA) 1uA 2.8V 200mA 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
XC6206P302MR
SOT-23-40℃~+85℃ 1 240mV@(50mA) 300mA 3V 3uA 40dB@(1kHz) 8V Fixed Over Current Protection、Short Circuit Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHXY MOSFETVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
RC0402FR-0710KL
UncategorisedUnknown maker
TS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches
MLP2016H3R3MT0S1
08061.2A 120mΩ 3.3uH Multilayer inductor ±20% 0806 Inductors (SMD) ROHSTDKInductors (SMD)
ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
SIQ-02FVS3
SMD500uA 5V Incremental Straight SMD Rotary Encoders ROHSMitsumi ElectricRotary Encoders
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C19, C20, C23, C25, C27, C28, C30, C31, C32, C33, C35, C37, C41 |
| 6 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C14, C15, C18, C21, C24, C26 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C22, C38, C39, C40 |
| 4 | Fiducial | bonanzaDisplay:Fiducial_1mm_Mask2mm | FID1, FID2, FID3, FID4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 27 | Resistor_SMD:R_0402_1005Metric | R31, R37, R38 |
| 3 | GND | bonanzaDisplay:TestPoint_Pad_D1.0mm | TP18, TP19, TP24 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R13, R33 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C16, C17 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C8, C36 |
| 2 | 1N4148 | Diode_SMD:D_SOD-523 | D2, D3 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R4 |
| 2 | TS-1088-AR02016 | bonanzaDisplay:SW-SMD_L3.9-W3.0-P4.45 | SW1, SW2 |
| 1 | 1.5uH | bonanzaDisplay:IND-SMD_L2.0-W1.6 | L2 |
| 1 | 13.7k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 1V1 | bonanzaDisplay:TestPoint_Pad_D1.0mm | TP17 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C34 |
| 1 | 2V8 | bonanzaDisplay:TestPoint_Pad_D1.0mm | TP16 |
| 1 | 3.3uH | bonanzaDisplay:IND-SMD-L2.0-W1.6-MLP2016H3R3MT0S1 | L1 |
| 1 | 30.9k | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 33nF | Capacitor_SMD:C_0402_1005Metric | C29 |
| 1 | 3V0 | bonanzaDisplay:TestPoint_Pad_D1.0mm | TP15 |
| 1 | 3V3 | bonanzaDisplay:TestPoint_Pad_D1.0mm | TP9 |
| 1 | 4.7k | Resistor_SMD:R_0402_1005Metric | R39 |
| 1 | 51 | Resistor_SMD:R_0402_1005Metric | R34 |
| 1 | 590k | Resistor_SMD:R_0402_1005Metric | R35 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | CCW | bonanzaDisplay:TestPoint_Pad_D1.0mm | TP12 |
| 1 | CW | bonanzaDisplay:TestPoint_Pad_D1.0mm | TP14 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10 | bonanzaDisplay:FPC-SMD_10P-P1.0_FGS-XJ-H2.0 | J5 |
| 1 | GPIO1 | bonanzaDisplay:TestPoint_Pad_D1.0mm | TP21 |
| 1 | GPIO2 | bonanzaDisplay:TestPoint_Pad_D1.0mm | TP20 |
| 1 | OLED-1.31-SSD1322 | bonanzaDisplay:FPC-SMD_P0.50-30P_LCS-SJ-H2.0 | J1 |
| 1 | RP2354A | bonanzaDisplay:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U1 |
| 1 | SCL | bonanzaDisplay:TestPoint_Pad_D1.0mm | TP22 |
| 1 | SDA | bonanzaDisplay:TestPoint_Pad_D1.0mm | TP23 |
| 1 | SIQ-02FVS3 | bonanzaDisplay:SW-SMD_SIQ-02FVS3 | SW3 |
| 1 | SW | bonanzaDisplay:TestPoint_Pad_D1.0mm | TP13 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | TPS62933DRLR | bonanzaDisplay:SOT-583-8_L2.1-W1.2-P0.50-LS1.6-BR | U4 |
| 1 | USB_C_Receptacle_USB2.0 | bonanzaDisplay:USB_C_Receptacle_GCT_USB4105-xx-A | J6 |
| 1 | XC6206P282MR | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | XC6206P302MR | Package_TO_SOT_SMD:SOT-23 | U2 |
Questions
How big is the BonanzaDisplay PCB?
It measures 61 × 101 mm and has 6 copper layers, 1.6 mm thick.
What parts does the BonanzaDisplay use?
81 parts, built around the RP2354A, XC6206P282MR, XC6206P302MR and RC0402FR-0710KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BonanzaDisplay KiCad files?
From the bitaxeorg/bonanzaDisplay repository on GitHub, at the commit this page was made from: the board is bonanzaDisplay.kicad_pcb and its schematic bonanzaDisplay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BonanzaDisplay design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers76 × 54 mm
Pixelblaze battery backpack
SK-Electronics-Consulting/electronics-widgets
Small, Custom Tools for Electronics
112 parts1 - 2 layers89 × 83 mm
- 6 layers110 × 71 mm
- 4 layers70 × 109.2 mm
Manafish
Tropaion/Manafish_Mainboard
The Manafish Mainboard is the main electronics board of the Manafish ROV. It replaces the Raspberry Pi 3B, the USB-connected Raspberry Pi Pico and the wiring between them with one board:
127 partsAGPL-3.0 - 2 layers20 × 110 mm
ComposerMIDICV
CopycatMusic/ComposerMIDICV
4 HP Eurorack USB/TRS MIDI-to-CV module: RP2354A firmware, KiCad hardware and v1.0 manufacturing files.
87 parts2AGPL-3.0 - 4 layers49.1 × 54.3 mm
Rp2350-hdmi hexpansion
Corteil/rp2350-hdmi-hexpansion
RP2350 HDMI hexpansion for the EMF Tildagon badge -- mirrors the badge's display to a monitor over HSTX/DVI
57 parts2 - 4 layers40 × 40 mm
Satellite
ciborg971/KISSE-1
A homebuilt aicraft made with the same philosophy as the linux kernel ... and electric
116 parts1MIT