4 layers110 × 100 mm
6 layers110 × 71 mm
Ampminer hat
skot/ampminer-hatAmlogic controlboard accessory board
- Size
- 110 × 71 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 131
- Pads
- 439
- Tracks, vias
- 39, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 Jul 2026
- Updated
- 13 Jul 2026
Overview
Ampminer hat is an open-source printed circuit board by skot, from the skot/ampminer-hat repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 6-layer board of 110 × 71 mm with 93 parts on 131 nets, routed with 39 tracks and 6 vias.
It is built around the RP2354A, TUSB4041IPAP and RC0402FR-0710KL, with the LESD8LH5.0CT5G, TS-1088-AR02016 and DMP3013SFV-7(ES) among its other parts. Its parts include 44 capacitors, 16 resistors, 6 ICs, 4 connectors and 3 diodes. It belongs with the RP2350 boards of this library.
Main components
7
RP2354A
QFN-60(7x7)150MHz 32 Bit ARM Cortex-M33 Built-in+External Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Built-in general-purpose timer、Integrated LDO、Calendar function、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG) QFN-60(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
TUSB4041IPAP
HTQFP-64(10x10)-40℃~+85℃ 0.99V~1.26V、3V~3.6V 225mA 33mA 4 Hub I2C、SMBus USB 2.0 HTQFP-64(10x10) USB HUB Controllers ROHSTexas InstrumentsUSB Converters
RC0402FR-0710KL
UncategorisedUnknown maker
LESD8LH5.0CT5G
SOD-88211.5V 1uA 2.7pF 3.5A@8/20us 40W@8/20us 5.5V 5V Bidirectional IEC 61000-4-2 TVS SOD-882 ESD and Surge Protection (TVS/ESD) ROHSLeshan Radio (LRC)ESD And Surge Protection (TVS/ESD)
TS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches
DMP3013SFV-7(ES)
PDFN-8L(3x3)PDFN-8L(3x3) MOSFETs ROHSElecSuperMOSFETs
LBZX84C12LT1G
SOT-23-55℃~+150℃ 1 Independent 100nA 11.4V~12.7V 12V 25Ω 300mW SOT-23 Zener Diodes ROHSLeshan Radio (LRC)Zener Diodes
README
README.mdAmpminer-hat
Ampminer-hat is a USB connected accessory board targeting Amlogic A113D controlboards
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C20, C23, C25, C27, C28, C30, C31, C32, C33, C35, C36, C37, C38, C39 +12 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R19, R20, R33, R34, R39 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C47, C48, C51, C52 |
| 4 | MountingHole_Pad | bitcrane:MountingHole_3mm_Pad | H1, H2, H3, H4 |
| 2 | 0455580003 | ampminer:CONN-TH_50362462 | J4, J6 |
| 2 | 1.5uH | ampminer:IND-SMD_L2.0-W1.6 | L3, L4 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C16, C17 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C9, C13 |
| 2 | 220Ω @ 100Mhz | ampminer:BEADC1005X55N | FB1, FB2 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C59, C60 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R37, R38 |
| 2 | 33nF | Capacitor_SMD:C_0402_1005Metric | C55, C56 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C14, C24 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | LESD8LH5.0CT5G | Diode_SMD:D_SOD-323 | D3, D4 |
| 2 | TLV74311PDBVR | ampminer:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BL | U2, U6 |
| 2 | TPS62933DRLR | ampminer:SOT-583-8_L2.1-W1.2-P0.50-LS1.6-BR | U4, U5 |
| 2 | TS-1088-AR02016 | ampminer:SW-SMD_L3.9-W3.0-P4.45 | SW1, SW2 |
| 1 | 10.0 QHHTZB6.3 | ampminer:USB-A-TH_10.0QHHTZB6.3 | USB1 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C46 |
| 1 | 10uF 35V | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 12MHz | ampminer:CRYSTAL-SMD_4P-L2.5-W2.0-BL-A | X1 |
| 1 | 12V | ampminer:TestPoint_Pad_D1.0mm | TP3 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 13.7k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 1V1 | ampminer:TestPoint_Pad_D1.0mm | TP17 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | 24MHz | ampminer:OSC-SMD_4P-L2.5-W2.0-BL | Y2 |
| 1 | 30.9k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 3V3 | ampminer:TestPoint_Pad_D1.0mm | TP14 |
| 1 | 4.7k | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 52.3k | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 5V | ampminer:TestPoint_Pad_D1.0mm | TP16 |
| 1 | 9.53k | Resistor_SMD:R_0402_1005Metric | R27 |
| 1 | DMP3013SFV-7 | ampminer:POWERPAK-1212-8_L3.1-W3.1-P0.65-LS3.3-BL | Q2 |
| 1 | GND | ampminer:TestPoint_Pad_D1.0mm | TP21 |
| 1 | LBZX84C12LT1G | ampminer:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | D6 |
| 1 | LOGO | ampminer:ampminer_logo | G*** |
| 1 | RP2354A | ampminer:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U3 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | TUSB4041I | Package_QFP:Texas_TQFP-64-1EP_10x10mm_P0.5mm_EP8x8mm_Mask4.44x4.44mm_ThermalVias | U11 |
| 1 | USB_C_Receptacle_USB2.0 | ampminer:USB_C_Receptacle_GCT_USB4105-xx-A | J1 |
Similar boards
- 6 layers61 × 101 mm
- 4 layers76 × 54 mm
Pixelblaze battery backpack
SK-Electronics-Consulting/electronics-widgets
Small, Custom Tools for Electronics
112 parts1 - 4 layers44.8 × 76 mm
- 2 layers135 × 95 mm
Dawn dock
rwrife/dawn-dock
USB-powered ESP32-S3 bedside clock that keeps alarms offline, syncs user-approved schedules from a phone or PC, dims for sleep, and remains useful without internet.
73 parts - 4 layers77.7 × 63.8 mm
- 4 layers45 × 75 mm
- 4 layers50 × 88.5 mm
Questions
How big is the Ampminer hat PCB?
It measures 110 × 71 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Ampminer hat use?
93 parts, built around the RP2354A, TUSB4041IPAP, RC0402FR-0710KL and LESD8LH5.0CT5G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ampminer hat KiCad files?
From the skot/ampminer-hat repository on GitHub, at the commit this page was made from: the board is ampminer-hat.kicad_pcb and its schematic ampminer-hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ampminer hat design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).