Skip to the content
2 layers135 × 95 mmDawn dock, the printed circuit board in 3D

USB-powered ESP32-S3 bedside clock that keeps alarms offline, syncs user-approved schedules from a phone or PC, dims for sleep, and remains useful without internet.

Size
135 × 95 mm
Copper layers
2
Thickness
1.6 mm
Parts
73
Nets
66
Pads
236
Tracks, vias
662, 152
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 Aug 2026
Updated
7 Nov 2026

Overview

Dawn dock is an open-source printed circuit board by rwrife, from the rwrife/dawn-dock repository on GitHub. It is a 2-layer board of 135 × 95 mm with 73 parts on 66 nets, routed with 662 tracks and 152 vias.

It is built around the ESP32-S3-DEVKITC-1-N8R8, DS3231MZ+ and SN74LVC14APWRG3, with the LESD8LH5.0CT5G and PEC11R-4215F-S0024 among its other parts. Its parts include 15 resistors, 8 capacitors, 3 ICs, 2 switches and 1 diode. It belongs with the lEDs and displays and home automation and IoT boards and the ESP32 boards of this library.

Main components

5

README

hardware/kicad/README.md

Dawn Dock KiCad source

This directory contains the editable Rev A carrier schematic and routed two-layer PCB. These are static design artifacts only: there is no fabricated assembly or bench evidence yet.

Files

  • dawn-dock.kicad_pro / dawn-dock.kicad_sch / dawn-dock.kicad_pcb — KiCad 9 project, schematic, and routed PCB.
  • lib/dawn-dock.kicad_sym — project symbols derived from cited manufacturer pin tables.
  • lib/dawn-dock.pretty/ — project footprints for the DevKit/socket, module headers, PEC11R, and Keystone 3003.
  • generate_schematic.py — reproducible source generator.
  • generate_pcb.py — deterministic board outline, placement, antenna rule area, and fine-pitch fanout generator from a fresh KiCad netlist.
  • specctra_io.py — KiCad-native DSN export / SES import bridge with current-aware routing classes.
  • finalize_pcb.py — deterministic final +5 V join, GND stitching, and filled dual-layer GND planes.
  • export_fabrication.py — reproducible review-only Gerber/drill/placement/render export and checksum generator.
  • validate_hardware.py — BOM/connectivity/evidence assertions.
  • reports/erc.rpt — native KiCad 9 ERC output.
  • reports/drc.json — native KiCad 9 PCB DRC/parity output for the committed board.
  • reports/schematic-analysis.json / .txt — static analyzer output.
  • reports/pcb.json, cross-analysis.json, emc.json, thermal.json, and gerber.json — layout/cross-domain risk evidence and disclosed gaps.
  • reports/hardware-validation.json — project-specific machine-readable checks.
  • fabrication/README.md / fabrication/rev-a0-prototype-review/ — checked review bundle under an explicit fabrication hold.

Rebuild

Use KiCad 9 symbol libraries and Python 3.11+:

bash
python3 -m venv .venv
.venv/bin/pip install -r hardware/kicad/requirements.txt
.venv/bin/python hardware/kicad/generate_schematic.py \
  --symbol-dir /usr/share/kicad/symbols

The schematic generator rewrites the project-local symbol and footprint files and the schematic. UUIDs may change between generations; review the electrical diff, not only textual UUID churn.

Rebuild and route the PCB

The accepted Rev A board was built with KiCad 9.0.2+dfsg-1, FreeRouting 2.3.0, and Eclipse Temurin 25.0.4+7. FreeRouting is nondeterministic; the committed .kicad_pcb is the reviewed editable result. The deterministic generator/finalizer and these commands make rerouting auditable, but a new SES result must pass the same DRC before replacing the committed board.

bash
docker build -t dawn-dock-kicad-verify \
  -f hardware/kicad/Dockerfile.verify hardware/kicad

route_dir="$(mktemp -d)"
curl -fL \
  https://github.com/freerouting/freerouting/releases/download/v2.3.0/freerouting-2.3.0.jar \
  -o "$route_dir/freerouting-2.3.0.jar"
printf '%s  %s\n' \
  '3cf18d608437740bc497db6b8ef5888e2e60a08de0def20691d1bad0c0e0ee24' \
  "$route_dir/freerouting-2.3.0.jar" | sha256sum --check

docker run --rm -v "$PWD:/work" -v "$route_dir:/route" -w /work \
  dawn-dock-kicad-verify sch export netlist \
  --output /route/dawn-dock.net hardware/kicad/dawn-dock.kicad_sch
docker run --rm -v "$PWD:/work" -v "$route_dir:/route" -w /work \
  --entrypoint python3 dawn-dock-kicad-verify \
  hardware/kicad/generate_pcb.py --netlist /route/dawn-dock.net \
  --output hardware/kicad/dawn-dock.kicad_pcb
docker run --rm -v "$PWD:/work" -v "$route_dir:/route" -w /work \
  --entrypoint python3 dawn-dock-kicad-verify \
  hardware/kicad/specctra_io.py export \
  --board hardware/kicad/dawn-dock.kicad_pcb --dsn /route/dawn-dock.dsn
docker run --rm -v "$route_dir:/route" eclipse-temurin:25-jre \
  java -jar /route/freerouting-2.3.0.jar \

Verify

Native KiCad 9 ERC:

bash
kicad-cli sch erc \
  --output hardware/kicad/reports/erc.rpt \
  --exit-code-violations \
  hardware/kicad/dawn-dock.kicad_sch

Schematic analyzer (from kicad-happy):

bash
python3 /path/to/kicad-happy/skills/kicad/scripts/analyze_schematic.py \
  hardware/kicad/dawn-dock.kicad_sch \
  --output hardware/kicad/reports/schematic-analysis.json
python3 /path/to/kicad-happy/skills/kicad/scripts/analyze_schematic.py \
  hardware/kicad/dawn-dock.kicad_sch --text \
  > hardware/kicad/reports/schematic-analysis.txt

Export the source-property BOM with KiCad 9:

bash
kicad-cli sch export bom hardware/kicad/dawn-dock.kicad_sch \
  --output bom/bom.csv \
  --fields 'Reference,${QUANTITY},Value,Footprint,Manufacturer,MPN,Supplier,Supplier PN,Estimated Unit Cost USD,Price Observed UTC,BOM Comments,${DNP}' \
  --labels 'Reference,Qty,Value,Footprint,Manufacturer,MPN,Supplier,Supplier_PN,Estimated_Unit_Cost_USD,Price_Observed_UTC,Notes,DNP' \
  --group-by 'Value,Footprint,Manufacturer,MPN,Supplier,Supplier PN,Estimated Unit Cost USD,Price Observed UTC,BOM Comments,${DNP}' \
  --sort-field Reference --sort-asc

Export a fresh netlist and then run the project gate with explicit fresh inputs:

bash
kicad-cli sch export netlist --output /tmp/dawn-dock.net \
  hardware/kicad/dawn-dock.kicad_sch
python3 hardware/kicad/validate_hardware.py \
  --netlist /tmp/dawn-dock.net \
  --bom bom/bom.csv \
  --erc hardware/kicad/reports/erc.rpt
python3 scripts/check_component_selection.py
python3 scripts/check_docs.py

CI does not trust these committed evidence files in isolation. It builds Dockerfile.verify, runs KiCad 9 ERC, exports a fresh netlist and BOM from the checked-out schematic, byte-compares the fresh BOM with bom/bom.csv, and calls validate_hardware.py --netlist ... --bom ... --erc ... on those fresh outputs. The validator intentionally has no stale-report fallback: all three inputs are required.

Verified design facts

  • USB-C is a 5 V sink only. CC1 and CC2 have independent 5.1 kΩ Rd resistors; D+/D-/SBU are NC.
  • TPS259531DSGR pin mapping follows TI SLVSE57C: dVdt 1, EN/UVLO 2, IN 3/4, OUT 5, FLT 6, ILM 7, GND 8/EP.
  • R_ILIM=1.53 kΩ: TI equation 4 gives approximately 1.347 A nominal; the documented +7.5% limit/-1% resistor bound is approximately 1.463 A.
  • C_DVDT=100 nF: TI equation 3 gives approximately 0.42 V/ms, or 11.9 ms to 5 V. With the explicitly fitted 480 µF output capacitance, the modeled capacitor inrush is approximately 202 mA; module-internal capacitance still requires measurement.
  • DS3231MZ+ uses the manufacturer SO-8 pin map. VBAT connects only to the CR2032 positive terminal; there is no charging component or rail tie.
  • SN74LVC14APWR uses TI's TSSOP-14 mapping. Five inputs receive separate 5 V/4.7 kΩ wetted contacts; outputs are 3.3 V logic. The unused sixth input is tied low and its output is NC.
  • DevKit header pins follow Espressif DevKitC-1 v1.1. N8R8-reserved GPIO35–37, strap pins 3/45/46, onboard RGB GPIO38, and native USB GPIO19/20 are not application loads.
  • Waveshare 29318 logic uses its manufacturer-listed SPI/I²C signals. Its 15-pin socket orientation and the received module revision must be rechecked before PCB placement/fabrication.

Intentional analyzer exceptions

The generic schematic analyzer reports 5 V/3.3 V crossings on I2C_SDA, I2C_SCL, and RTC_INT_N. These are static-classification false positives: the Waveshare display explicitly includes level conversion and supports 3.3 V logic while powered from 5 V; the Adafruit 4162 is powered from 3.3 V; DS3231MZ+ is powered and pulled up at 3.3 V. No 5 V pull-up is fitted on those nets.

The optional carrier I²C pull-ups are DNP because the display and sensor modules include pull-ups. Populate only after measuring aggregate resistance/rise time on received modules.

Open evidence gates

  • The routed Rev A0 board and review-only manufacturing outputs exist, but six error-level heuristic plane-coverage findings and two error-level clock-transition return-path findings remain open. The finalizer added 59 DRC-clean return vias; see reports/emc.json and fabrication/README.md.
  • Exact received-unit dimensions, connector orientation, enclosure/mechanical placement, and antenna metal clearance still block fabrication.
  • Module revision, connector orientation, total module capacitance, current, luminance, audio, RTC retention/drift, ESD/EMC, and thermals require identified physical hardware.
  • Price and availability are dated 2026-08-23 planning observations, not purchase-time guarantees.
  • The local analyzer has no structured datasheet extraction cache, so its trust rollup remains low even though critical pin tables were manually checked against downloaded manufacturer PDFs. Do not convert this static review into a bench-tested or fabrication-ready claim.

Parts

73
QtyValueFootprintReferences
5100nF 50V X7RCapacitor_SMD:C_0603_1608MetricC2, C3, C5, C7, C8
54.7k 1%Resistor_SMD:R_0603_1608MetricR11, R12, R13, R14, R15
4M3 mounting holeMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3100k 1%Resistor_SMD:R_0603_1608MetricR5, R6, R10
3GLOBAL FIDUCIALFiducial:Fiducial_1mm_Mask2mmFID1, FID2, FID3
210k 1%Resistor_SMD:R_0603_1608MetricR4, R7
24.7k 1% DNPResistor_SMD:R_0603_1608MetricR8, R9
25.1k 1%Resistor_SMD:R_0603_1608MetricR1, R2
1+3V3TestPoint:TestPoint_Pad_D1.5mmTP3
1+5V_SYSTestPoint:TestPoint_Pad_D1.5mmTP2
11.53k 1%Resistor_SMD:R_0603_1608MetricR3
110uF 10V X5RCapacitor_SMD:C_1206_3216MetricC4
11uF 16V X7RCapacitor_SMD:C_0603_1608MetricC1
13.5in CAP TOUCH LCDConnector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_VerticalDS1
1470uF 10VCapacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mmC6
1AMP_SDTestPoint:TestPoint_Pad_D1.5mmTP20
1BOOT_GPIO0TestPoint:TestPoint_Pad_D1.5mmTP6
1BRIGHTNESSButton_Switch_THT:SW_TH_Tactile_Omron_B3F-10xxSW2
1BRIGHTNESS_NTestPoint:TestPoint_Pad_D1.5mmTP27
1CHIP_PUTestPoint:TestPoint_Pad_D1.5mmTP5
1CR2032 PRIMARYdawn-dock:Keystone_3003_CR2032BT1
1DS3231MZ+Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1EFUSE_FLT_NTestPoint:TestPoint_Pad_D1.5mmTP30
1ENC_ATestPoint:TestPoint_Pad_D1.5mmTP23
1ENC_BTestPoint:TestPoint_Pad_D1.5mmTP24
1ENC_SWTestPoint:TestPoint_Pad_D1.5mmTP25
1ESP32-S3-DEVKITC-1-N8R8dawn-dock:ESP32-S3-DevKitC-1_SocketA1
1GNDTestPoint:TestPoint_Pad_D1.5mmTP4
1I2C_SCLTestPoint:TestPoint_Pad_D1.5mmTP8
1I2C_SDATestPoint:TestPoint_Pad_D1.5mmTP7
1I2S_BCLKTestPoint:TestPoint_Pad_D1.5mmTP17
1I2S_DOUTTestPoint:TestPoint_Pad_D1.5mmTP19
1I2S_LRCLKTestPoint:TestPoint_Pad_D1.5mmTP18
1LCD_BLTestPoint:TestPoint_Pad_D1.5mmTP10
1LESD8LH5.0CT5GDiode_SMD:D_SOD-882D1
1MAX98357A I2S AMPdawn-dock:Adafruit_3006_MAX98357AA2
1PEC11R-4215F-S0024dawn-dock:PEC11R-4xxxF-SxxxxENC1
1RTC_INT_NTestPoint:TestPoint_Pad_D1.5mmTP9
1SN74LVC14APWRPackage_SO:TSSOP-14_4.4x5mm_P0.65mmU3
1SNOOZEButton_Switch_THT:SW_TH_Tactile_Omron_B3F-10xxSW1
1SNOOZE_NTestPoint:TestPoint_Pad_D1.5mmTP26
1SPK+TestPoint:TestPoint_Pad_D1.5mmTP21
1SPK-TestPoint:TestPoint_Pad_D1.5mmTP22
1TFT_CSTestPoint:TestPoint_Pad_D1.5mmTP14
1TFT_DCTestPoint:TestPoint_Pad_D1.5mmTP15
1TFT_MISOTestPoint:TestPoint_Pad_D1.5mmTP13
1TFT_MOSITestPoint:TestPoint_Pad_D1.5mmTP12
1TFT_RSTTestPoint:TestPoint_Pad_D1.5mmTP16
1TFT_SCLKTestPoint:TestPoint_Pad_D1.5mmTP11
1TPS259531DSGRPackage_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalViasU2
1U0RXDTestPoint:TestPoint_Pad_D1.5mmTP29
1U0TXDTestPoint:TestPoint_Pad_D1.5mmTP28
1USB-C POWER ONLYConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1
1VBUSTestPoint:TestPoint_Pad_D1.5mmTP1
1VEML7700 BREAKOUTdawn-dock:Adafruit_4162_VEML7700A3

Similar boards

  • 4 layers44.8 × 76 mmTiny scarab, the printed circuit board in 3D

    Tiny scarab

    Embeetle/tiny-scarab

    Tiny beetle board based on the CH32V003 10-cent chip.

    147 parts24MIT
  • 6 layers110 × 71 mmAmpminer hat, the printed circuit board in 3D

    Ampminer hat

    skot/ampminer-hat

    Amlogic controlboard accessory board

    93 partsCERN-OHL-S-2.0
  • 4 layers55.1 × 58 mmLINC, the printed circuit board in 3D

    LINC

    noahhusby/LINC

    The Laboratory Instrument Network Controller (LINC) is a modern network GPIB interface for test equipment

    39 parts1CERN-OHL-P-2.0
  • 4 layers182.8 × 68 mmPFM, the printed circuit board in 3D

    PFM

    martinrybka2000/openacme-pfm

    An open-source power quality meter for AC installations. It measures voltage, current, power (active / reactive / apparent), frequency, power factors and THD, and exposes the results over Ethernet and Modbus, with PQDIF…

    183 partsGPL-3.0
  • 6 layers156 × 54.5 mmFilled growth band43-1, the printed circuit board in 3D

    Filled growth band43-1

    AxelMcKenna/AFX-1000

    RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.

    255 parts1
  • 2 layers100 × 100 mmMain REVA2, the printed circuit board in 3D

    Main REVA2

    Joris1306/Collecteur_de_donnees_animalieres

    Bienvenue sur le dépôt officiel du projet Piège Photographique avec Classification Animale par IA. Nous sommes une équipe de six étudiants ingénieurs de Polytech Nantes ayant dédié une année universitaire complète à la…

    68 parts1
  • 2 layers130.5 × 169.5 mmLinefollowingrobot, the printed circuit board in 3D

    Linefollowingrobot

    msafeerhassan/linefollowingrobot

    Line Following Robot with PID project uses IR Sensors, Microcontroller and Motors to follow a line path on the floor.

    18 parts1

Questions

How big is the Dawn dock PCB?

It measures 135 × 95 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dawn dock use?

73 parts, built around the ESP32-S3-DEVKITC-1-N8R8, DS3231MZ+, SN74LVC14APWRG3 and LESD8LH5.0CT5G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dawn dock KiCad files?

From the rwrife/dawn-dock repository on GitHub, at the commit this page was made from: the board is hardware/kicad/dawn-dock.kicad_pcb and its schematic hardware/kicad/dawn-dock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dawn dock design in my own project?

Its repository states no licence, so its author keeps all rights: ask rwrife before reusing the design.