Skip to the content
4 layers27.9 × 63.5 mmPico2-ice, the printed circuit board in 3D

Doc | Hardware | SDK | Schematic | Assembly | Discord

Size
27.9 × 63.5 mm
Copper layers
4
Thickness
1.58 mm
Parts
124
Nets
125
Pads
565
Tracks, vias
2,189, 270
Pours
15
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
13 Aug 2024
Updated
4 Jul 2025

Overview

Pico2-ice is an open-source printed circuit board by tinyvision-ai-inc, from the tinyvision-ai-inc/pico2-ice repository on GitHub, published under the MIT licence. It is a 4-layer board of 27.9 × 63.5 mm with 124 parts on 125 nets, routed with 2,189 tracks and 270 vias.

It is built around the ICE40UP5K-SG48I, RP2350B and W25Q32JVSSIQ, with the APS6404L-3SQN-SN, TL431BQDBZR and RC0402FR-0710KL among its other parts. Its parts include 42 capacitors, 40 resistors, 8 ICs, 7 diodes and 5 connectors. It belongs with the RP2350 and FPGA and CPLD boards of this library.

Main components

12

README

README.md

pico2-ice

Doc | Hardware | SDK | Schematic | Assembly | Discord

PCB Design Files, Designs, Documentation

The pico2-ice is a small, low cost board with the Raspberry Pi Pico processor (RP2350) and a Lattice Semiconductor iCE40UP5K FPGA. The board features independent flash for the FPGA and RP2350, low power PSRAM, a couple of pushbuttons and a two 3 color LED with all FPGA and RP2350 pins brought out to easy to use 0.1" header pins (arranged as Pmod's) for fast prototyping.

The tinyVision.ai pico2-ice board Features:

  • Raspberry Pi RP2350B processor
  • Lattice UltraPlus ICE40UP5K FPGA with 5.3k LUTs, 1Mb SPRAM, 120Kb DPRAM, 8 Multipliers
  • ALL RP2350 and 32 FPGA GPIO on 0.1” headers
  • 4MB SPI Flash
  • 8MB low power qSPI SRAM
  • 2 RGB LED, one for the RP2350 and one for the FPGA
  • 2 pushbuttons, 1 for RP2350 boot mode that can also be used for other functions, and one for the FPGA
  • On board 3.3V and 1.2V Regulators, can supply 3.3V to your project
  • Open source schematic and layout using KiCAD design tools
  • 4 layer board with a solid ground plane for good signal integrity

Firmware features:

  • FPGA clock supplied by the RP2350, easy to program FPGA clock under SW control
  • RP2350 can program the FPGA in various ways
  • Micropython Firmware or C SDK

OSHW US002732 | Certified open source hardware | oshwa.org/cert

Parts

124
QtyValueFootprintReferences
220.1uCapacitor_SMD:C_0402_1005MetricC10, C12, C14, C15, C16, C17, C18, C19, C21, C24, C26, C27, C28, C29, C33, C36 +6
184.7uCapacitor_SMD:C_0402_1005MetricC3, C11, C13, C20, C22, C23, C25, C30, C31, C32, C34, C35, C37, C38, C39, C41 +2
910KResistor_SMD:R_0402_1005MetricR7, R8, R13, R15, R16, R21, R23, R28, R32
8SHORTJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmR30, R31, SJ1, SJ2, SJ3, SJ4, SJ5, SJ6
627Resistor_SMD:R_0402_1005MetricR4, R5, R6, R9, R26, R34
6FiducialFiducial:Fiducial_0.75mm_Mask1.5mmFID1, FID2, FID3, FID4, FID5, FID6
51kResistor_SMD:R_0402_1005MetricR1, R2, R17, R18, R19
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5H1, H2, H3, H4
31N5819WSDiode_SMD:D_SOD-323D5, D6, D7
35.1KResistor_SMD:R_0402_1005MetricR10, R24, R33
2100Resistor_SMD:R_0402_1005MetricR11, R25
210pCapacitor_SMD:C_0402_1005MetricC1, C2
22.2KResistor_SMD:R_0402_1005MetricR14, R29
256KResistor_SMD:R_0402_1005MetricR20, R22
2CS1213AGF260CUSTOM:PTS820J25KSMTRLFSSW1, SW2
2DNFResistor_SMD:R_0402_1005MetricR3, R27
2MHPA1010RGBDTCUSTOM:LED_Cree-PLCC4_1x1mm_CWD2, D4
2SolderJumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mmJP1, JP2
2W25Q32JVSSIQPackage_SO:SOIC-8_5.23x5.23mm_P1.27mmU2, U8
110KResistor_SMD:R_Array_Concave_4x0402RN1
11KResistor_SMD:R_0402_1005MetricR12
11N4148WT-7Diode_SMD:D_SOD-523D1
13.3uRP2350_60QFN_minimal:L_pol_2016L1
1ABM8-272-T3Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1APS6404L-3SQN-SNPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU5
1BM03B-SRSS-TBConnector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_VerticalJ5
1Conn_02x20_Odd_EvenRP2040_minimal:PinHeader_2x20_P2.54mm_Vertical_RightJ3
1Conn_02x20_Odd_EvenRP2040_minimal:PinHeader_2x20_P2.54mm_Vertical_LeftJ2
1ICE40UP5K-SG48ITRPackage_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mmU6
1LTST-C191KGKTLED_SMD:LED_0603_1608MetricD3
1MF-FSMF035X-2Resistor_SMD:R_0603_1608MetricPTC1
1NCP115AMX120TCGRP2040_minimal:OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mmU1
1NCP115AMX330TCGRP2040_minimal:OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mmU9
1OSHW ID: US002372CUSTOM:OSHW_Dual_0.1_Scale_2140LOGO4
1Pb free LogoCUSTOM:Pb free logoLOGO3
1RP2350_80QFNRP2350_60QFN_minimal:RP2350B_QFN-80_EP_10.573x10.573_Pitch0.4mmU3
1SFV22R-2STE1HLFRP2350_60QFN_minimal:AMPHENOL_SFV22R-2STE1HLFJ6
1TL431DBZPackage_TO_SOT_SMD:SOT-23U4
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1
1WEEE LogoCUSTOM:WEEE logoLOGO2
1tinyVS Logologo1:tiny_13X5_newLOGO1

Similar boards

  • 2 layers89 × 83 mmPico2-nx, the printed circuit board in 3D

    Pico2-nx

    tinyvision-ai-inc/pico2-nx

    RP2350+Lattice Crosslink NX FPGA board

    242 parts5MIT
  • 4 layers22.9 × 61 mmPico ice, the printed circuit board in 3D

    Pico ice

    tinyvision-ai-inc/pico-ice

    Raspberry Pi PICO board + Lattice iCE40 FPGA's

    101 parts203MIT
  • 2 layers32.1 × 50 mmBike voltage regulator rectifier, the printed circuit board in 3D

    Bike voltage regulator rectifier

    indoor-industry/bike_voltage_regulator-rectifier

    Schematic, PCB and case of a regulator-rectifier for batteryless single-wire stator motorbikes

    29 parts
  • 2 layers48.2 × 57 mmSunlu S1-Board, the printed circuit board in 3D

    Sunlu S1-Board

    Pegoku/Sunlu-S1-Board

    Drop-in replacement controller board for the Sunlu S1 filament dryer.

    58 parts15
  • 6 layers61 × 101 mmBonanzaDisplay, the printed circuit board in 3D

    BonanzaDisplay

    bitaxeorg/bonanzaDisplay

    Display PCB for the bitaxeBonanza

    81 partsCERN-OHL-S-2.0
  • 2 layers36 × 20.3 mmPmod ft link, the printed circuit board in 3D

    Pmod ft link

    chipsalliance/rocket-pcb

    PCB libraries and templates for rocket-chip based FPGA/ASIC designs

    38 parts21Apache-2.0
  • 2 layers22 × 39 mmPhilly Node, the printed circuit board in 3D

    Philly Node

    tasmaniandroid/Philly_Node

    The start of a Philly-Centric mesh node.

    77 parts2CERN-OHL-S-2.0
  • 8 layers74 × 128 mmLimejig, the printed circuit board in 3D

    Limejig

    taskx6004/limejig

    Open-source LimeJig fixture firmware, host tools, KiCad source, and synthetic test examples

    92 parts1MIT

Questions

How big is the Pico2-ice PCB?

It measures 27.9 × 63.5 mm and has 4 copper layers, 1.58 mm thick.

What parts does the Pico2-ice use?

124 parts, built around the ICE40UP5K-SG48I, RP2350B, W25Q32JVSSIQ and APS6404L-3SQN-SN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pico2-ice KiCad files?

From the tinyvision-ai-inc/pico2-ice repository on GitHub, at the commit this page was made from: the board is Board/Rev2/pico2-ice.kicad_pcb and its schematic Board/Rev0/pico2-ice.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pico2-ice design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).