

IR Remote
helo
- Size
- 153.5 × 53 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 31
- Pads
- 118
- Tracks, vias
- 160, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Dec 2023
- Updated
- 4 Nov 2026
Overview
IR Remote is an open-source printed circuit board by bismarx-v1, from the bismarx-v1/SchoolStuff repository on GitHub. It is a 2-layer board of 153.5 × 53 mm with 51 parts on 31 nets, routed with 160 tracks and 0 vias.
It is built around the BC547, BC327 and BC337, with the NE555P among its other parts. Its parts include 12 resistors, 11 capacitors, 6 connectors, 4 diodes and 2 switches.
Main components
4BC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)BC327
TO-921 PNP 100MHz 45V 5V 625mW 630 700mV 800mA PNP TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)BC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)NE555P
DIP-80℃~+70℃ 100kHz 10mA 4.5V~16V DIP-8 555 Timers / Counters ROHSTexas InstrumentsTimers / Counters
README
README.mdHewwo this is useless
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | M3 | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4, H5, H6, H7, H8 |
| 3 | 100n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C6, C7, C11 |
| 3 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C5, C8 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R10, R12 |
| 3 | 470R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R9, R11 |
| 3 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4, J5, J6 |
| 2 | 47R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92_Inline_Wide | T3, T4 |
| 2 | Conn_01x01_Pin | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J1, J2 |
| 1 | 100p | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2 |
| 1 | 10R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C4 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D4 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 2.2n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 220k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 22uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C10 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C9 |
| 1 | 7490 | Package_DIP:DIP-14_W7.62mm | IO4 |
| 1 | BC327 | Package_TO_SOT_THT:TO-92_Inline_Wide | T1 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92_Inline_Wide | T2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | IR_LED | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_Clear | D1 |
| 1 | L78L05_TO92 | Package_TO_SOT_THT:TO-92_Inline_Wide | IO2 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | IO1 |
| 1 | R_LED | LED_THT:LED_D5.0mm | D3 |
| 1 | Relay_SPDT | Relay_THT:Relay_SPDT_Finder_36.11 | K1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | TSOP312xx | OptoDevice:Vishay_CAST-3Pin | IO3 |
| 1 | Y_LED | LED_THT:LED_D5.0mm | D2 |
More from bismarx-v1/SchoolStuff
8- 2 layers

- 2 layers70 × 70 mm

- 2 layers59.5 × 31.8 mm

- 2 layers29 × 48 mm

- 2 layers94.5 × 64.5 mm

- 2 layers70 × 24 mm

- 2 layers21.5 × 20.8 mm

- 2 layers22.9 × 15.2 mm

Similar boards
- 2 layers153.5 × 125.2 mm

- 2 layers78.4 × 31 mm

- 2 layers47 × 49.5 mm

- 2 layers70 × 45 mm

Oscilador amplificador
me15degrees/eletronica-analogica
Repositório com todos os arquivos e documentação de trabalhos finais realizados nas disciplinas de Eletrônica Analógica I e Eletrônica Analógica II.
23 parts1 - 2 layers152.4 × 76.2 mm

Transistor
apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.
119 parts - 2 layers224.2 × 153.7 mm

- 2 layers213.6 × 127.5 mm

- 2 layers120.1 × 120 mm

Mono amplifier
dario0603/AB-class-amplifier
Design and simulation of a Class-AB audio power amplifier, focusing on output-stage linearity, crossover distortion reduction, and overcurrent protection.
97 parts1
Questions
How big is the IR Remote PCB?
It measures 153.5 × 53 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IR Remote use?
51 parts, built around the BC547, BC327, BC337 and NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IR Remote KiCad files?
From the bismarx-v1/SchoolStuff repository on GitHub, at the commit this page was made from: the board is SPS_Prosek_stuff/PX-KnR/IR_Remote/IR_Remote/IR_Remote.kicad_pcb and its schematic SPS_Prosek_stuff/PRG-BuJ/Programming/programovani-main/3EA/enkoder/pcb_encoder_filter/encoder_fiter/encoder_fiter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IR Remote design in my own project?
Its repository states no licence, so its author keeps all rights: ask bismarx-v1 before reusing the design.