Skip to the content
2 layersRammsteinLampe, the printed circuit board in 3D

helo

Copper layers
2
Thickness
1.6 mm
Parts
99
Nets
34
Pads
198
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8.0 (file 20240108)
Created
8 Dec 2023
Updated
4 Nov 2026

Overview

RammsteinLampe is an open-source printed circuit board by bismarx-v1, from the bismarx-v1/SchoolStuff repository on GitHub. It is a 2-layer board with 99 parts on 34 nets.

Its parts include 64 diodes, 32 resistors, 2 capacitors and 1 connector.

README

README.md

Hewwo this is useless

Parts

99
QtyValueFootprintReferences
64R_LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +48
32220RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +16
1100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
110uFCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolderC2
1Conn_01x02_PinSchrack_brd:SOLDER_PADSJ1

More from bismarx-v1/SchoolStuff

8
  • 2 layers153.5 × 53 mmIR Remote, the printed circuit board in 3D

    IR Remote

    bismarx-v1/SchoolStuff

    helo

    51 parts1
  • 2 layers59.5 × 31.8 mmPolice lights, the printed circuit board in 3D

    Police lights

    bismarx-v1/SchoolStuff

    helo

    30 parts1
  • 2 layers29 × 48 mmTask01, the printed circuit board in 3D

    Task01

    bismarx-v1/SchoolStuff

    helo

    28 parts1
  • 2 layers94.5 × 64.5 mmLF LAP TIMER, the printed circuit board in 3D

    LF LAP TIMER

    bismarx-v1/SchoolStuff

    helo

    21 parts1
  • 2 layers21.5 × 20.8 mmSurgery, the printed circuit board in 3D

    Surgery

    bismarx-v1/SchoolStuff

    helo

    11 parts1
  • 2 layers22.9 × 15.2 mmEncoder fiter, the printed circuit board in 3D

    Encoder fiter

    bismarx-v1/SchoolStuff

    helo

    7 parts1

Similar boards

  • 2 layers106.4 × 95 mmIsavideo, the printed circuit board in 3D

    Isavideo

    schlae/graphics-gremlin

    Open source retro ISA video card

    99 parts582CC-BY-SA-4.0
  • 2 layers100 × 110 mmKicad control board, the printed circuit board in 3D

    Kicad control board

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    99 parts171
  • 2 layers66.1 × 62.2 mmMimas, the printed circuit board in 3D

    Mimas

    numato/samplecode

    This repository contains sample code for different Numato Lab products

    99 parts144
  • 2 layers89.2 × 58.9 mm8In-8Out LAN9252-only, the printed circuit board in 3D

    8In-8Out LAN9252-only

    MetalMusings/MyOwnEtherCATDevice

    Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.

    99 parts93
  • 2 layers151.1 × 93.4 mmESP32-P4 16, the printed circuit board in 3D

    ESP32-P4 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    99 parts78
  • 2 layersISA FPGA CPU, the printed circuit board in 3D

    ISA FPGA CPU

    robfinch/Cores

    Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.

    99 parts78
  • 2 layers144.8 × 88.9 mmPotentiostat, the printed circuit board in 3D

    Potentiostat

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    99 parts57CC-BY-4.0
  • 2 layers38 × 65 mmSpe sink, the printed circuit board in 3D

    Spe sink

    Scottapotamas/spe-marine-node

    Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L + 802.3cg)

    99 parts34MIT

Questions

What parts does the RammsteinLampe use?

99 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RammsteinLampe KiCad files?

From the bismarx-v1/SchoolStuff repository on GitHub, at the commit this page was made from: the board is misc_projects/RammsteinLampe/RammsteinLampe.kicad_pcb and its schematic SPS_Prosek_stuff/PRG-BuJ/Programming/programovani-main/3EA/enkoder/pcb_encoder_filter/encoder_fiter/encoder_fiter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RammsteinLampe design in my own project?

Its repository states no licence, so its author keeps all rights: ask bismarx-v1 before reusing the design.